Engineering, Management, Agriculture and Veterinary MCQs are now live. FPSC, PPSC, EPE, IELTS & GRE coming soon.

Internal Combustion Engines: Automobile Engineering

Mechanical Engineering · Internal Combustion Engines

37 questions, each with the answer and a worked solution.

Practice interactively and track your score →
Question 1

What is the function of the clutch in a vehicle?

  1. To connect and disconnect the engine from the transmission smoothly
  2. To steer the vehicle
  3. To stop the vehicle
  4. To change gear ratios
Show answer & solution

Answer: (A) To connect and disconnect the engine from the transmission smoothly

Most manual cars use a single-plate dry clutch.

Question 2

What is the function of a gearbox in a vehicle?

  1. To cool the engine
  2. To stop the vehicle
  3. To start the engine
  4. To provide different torque and speed ratios between engine and wheels, and reverse
Show answer & solution

Answer: (D) To provide different torque and speed ratios between engine and wheels, and reverse

Low gears give high torque for starting and climbing.

Question 3

Which type of manual gearbox is most common in modern cars?

  1. Constant mesh without synchronisers
  2. Sliding mesh gearbox
  3. Synchromesh gearbox
  4. Epicyclic only
Show answer & solution

Answer: (C) Synchromesh gearbox

Synchronisers match gear speeds for smooth shifting.

Question 4

What does a torque converter do in an automatic transmission?

  1. It controls steering
  2. It cools the engine
  3. It locks the wheels
  4. It transmits and multiplies engine torque through fluid
Show answer & solution

Answer: (D) It transmits and multiplies engine torque through fluid

It replaces the friction clutch.

Question 5

What is the function of the propeller shaft in a rear-wheel-drive vehicle?

  1. To steer the vehicle
  2. To transmit power from the gearbox to the differential
  3. To support the body
  4. To brake the vehicle
Show answer & solution

Answer: (B) To transmit power from the gearbox to the differential

It has universal joints and a slip joint.

Question 6

Why is a slip joint provided on the propeller shaft?

  1. To reduce speed
  2. To connect the clutch
  3. To allow changes in shaft length as the rear axle moves up and down
  4. To change gears
Show answer & solution

Answer: (C) To allow changes in shaft length as the rear axle moves up and down

Universal joints allow changes in angle.

Question 7

What is the function of the differential?

  1. To allow the driving wheels to turn at different speeds when the vehicle turns a corner
  2. To steer
  3. To apply brakes
  4. To change gears
Show answer & solution

Answer: (A) To allow the driving wheels to turn at different speeds when the vehicle turns a corner

The outer wheel travels farther than the inner wheel on a turn.

Question 8

What is the final drive in a vehicle?

  1. The steering gear
  2. The gear reduction between the propeller shaft and the axle shafts
  3. The first gear in the gearbox
  4. The brake system
Show answer & solution

Answer: (B) The gear reduction between the propeller shaft and the axle shafts

It usually uses bevel or hypoid gears.

Question 9

What is a full-floating rear axle?

  1. An axle without bearings
  2. An axle carrying all loads
  3. An axle in which the axle shafts carry only driving torque, while the vehicle weight is carried by the axle housing
  4. A front axle
Show answer & solution

Answer: (C) An axle in which the axle shafts carry only driving torque, while the vehicle weight is carried by the axle housing

It is used in heavy trucks.

Question 10

What is camber in wheel alignment?

  1. The inward or outward tilt of the wheel from the vertical, seen from the front
  2. The backward tilt of the steering axis
  3. The inward pointing of the wheels
  4. The wheel diameter
Show answer & solution

Answer: (A) The inward or outward tilt of the wheel from the vertical, seen from the front

Incorrect camber causes uneven tyre wear.

Question 11

What is caster in wheel alignment?

  1. The toe-in of wheels
  2. The tyre pressure
  3. The tilt of the wheel from the vertical, seen from the front
  4. The backward or forward tilt of the steering axis, seen from the side
Show answer & solution

Answer: (D) The backward or forward tilt of the steering axis, seen from the side

Positive caster gives directional stability and self-centring.

Question 12

What is toe-in?

  1. The front wheels pointing slightly inward at the front
  2. The steering axis tilt
  3. The wheels pointing outward
  4. The wheel tilt from the vertical
Show answer & solution

Answer: (A) The front wheels pointing slightly inward at the front

It compensates for the tendency of wheels to splay outward.

Question 13

What is king-pin inclination?

  1. The wheel tilt
  2. The backward tilt of the steering axis
  3. The inward tilt of the steering axis at the top, seen from the front
  4. The toe-out on turns
Show answer & solution

Answer: (C) The inward tilt of the steering axis at the top, seen from the front

It helps self-centring of the steering.

Question 14

Which steering gear is common in modern cars?

  1. Cam and lever
  2. Rack and pinion
  3. Recirculating ball only in all cars
  4. Worm and sector only
Show answer & solution

Answer: (B) Rack and pinion

It is simple, light and precise.

Question 15

On which principle do hydraulic brakes work?

  1. Bernoulli's theorem
  2. Newton's law of viscosity
  3. Archimedes' principle
  4. Pascal's law
Show answer & solution

Answer: (D) Pascal's law

Pressure from the master cylinder is transmitted equally to all wheel cylinders.

Question 16

What is the function of the master cylinder in a hydraulic brake system?

  1. To cool the brakes
  2. To convert pedal force into hydraulic pressure
  3. To store brake fluid only
  4. To apply the parking brake
Show answer & solution

Answer: (B) To convert pedal force into hydraulic pressure

Brake fluid then acts on the wheel cylinders or callipers.

Question 17

Why are disc brakes preferred on front wheels?

  1. They work without fluid
  2. They need no pads
  3. They dissipate heat better and resist brake fade
  4. They are cheaper than drum brakes
Show answer & solution

Answer: (C) They dissipate heat better and resist brake fade

Most braking force acts on the front wheels.

Question 18

What is the purpose of an anti-lock braking system (ABS)?

  1. To prevent the wheels from locking during hard braking, so that the driver can steer
  2. To increase speed
  3. To stop the engine
  4. To make brakes harder
Show answer & solution

Answer: (A) To prevent the wheels from locking during hard braking, so that the driver can steer

It rapidly releases and reapplies brake pressure.

Question 19

Which brake system is commonly used in heavy trucks and buses?

  1. Mechanical brakes only
  2. Electric brakes only
  3. Hydraulic brakes only
  4. Air brakes
Show answer & solution

Answer: (D) Air brakes

Compressed air from an engine-driven compressor applies the brakes.

Question 20

What is the function of a shock absorber (damper)?

  1. To damp the oscillations of the suspension springs
  2. To support the vehicle weight
  3. To steer the vehicle
  4. To brake the vehicle
Show answer & solution

Answer: (A) To damp the oscillations of the suspension springs

Telescopic hydraulic dampers are common.

Question 21

What is a MacPherson strut?

  1. A torsion bar
  2. A rigid axle
  3. A leaf spring
  4. An independent suspension unit combining a coil spring and shock absorber that also acts as a steering pivot
Show answer & solution

Answer: (D) An independent suspension unit combining a coil spring and shock absorber that also acts as a steering pivot

It is widely used for front suspension.

Question 22

What does the tyre size 185/65 R15 mean?

  1. 185 inches wide
  2. Rim of 185 mm
  3. Tyre width 185 mm, aspect ratio 65%, radial construction, for a 15-inch rim
  4. 65 km/h speed rating
Show answer & solution

Answer: (C) Tyre width 185 mm, aspect ratio 65%, radial construction, for a 15-inch rim

The aspect ratio is section height as a percentage of width.

Question 23

What is the main advantage of radial tyres over cross-ply (bias) tyres?

  1. Higher fuel consumption
  2. Better grip, lower rolling resistance and longer tread life
  3. Lower cost only
  4. Harder ride
Show answer & solution

Answer: (B) Better grip, lower rolling resistance and longer tread life

Most modern cars use radial tyres.

Question 24

What is a monocoque (unitary) body construction?

  1. A body without a floor
  2. A separate ladder frame with body bolted on
  3. A construction in which the body and frame form a single load-carrying structure
  4. A wooden frame
Show answer & solution

Answer: (C) A construction in which the body and frame form a single load-carrying structure

Most modern cars use monocoque construction.

Question 25

What is the function of the alternator in a vehicle?

  1. To start the engine
  2. To generate electricity to charge the battery and power electrical systems while the engine runs
  3. To ignite the fuel
  4. To cool the engine
Show answer & solution

Answer: (B) To generate electricity to charge the battery and power electrical systems while the engine runs

Its AC output is rectified to DC.

Question 26

What type of motor is used as a starter motor in vehicles?

  1. DC series motor
  2. AC induction motor
  3. Stepper motor
  4. Synchronous motor
Show answer & solution

Answer: (A) DC series motor

It gives very high starting torque.

Question 27

What is the usual voltage of a car battery?

  1. 6 V
  2. 12 V
  3. 24 V
  4. 240 V
Show answer & solution

Answer: (B) 12 V

Heavy vehicles often use 24 V systems.

Question 28

What is the role of the electronic control unit (ECU) in a modern engine?

  1. Charging the battery only
  2. Cooling the engine
  3. Steering the vehicle
  4. Controlling fuel injection, ignition timing and other functions using sensor signals
Show answer & solution

Answer: (D) Controlling fuel injection, ignition timing and other functions using sensor signals

An oxygen sensor helps it maintain the correct air–fuel ratio.

Question 29

What is a hybrid vehicle?

  1. A vehicle using only diesel
  2. A vehicle running on two fuels in one tank
  3. A vehicle without an engine
  4. A vehicle that combines an IC engine with an electric motor and battery
Show answer & solution

Answer: (D) A vehicle that combines an IC engine with an electric motor and battery

Regenerative braking recharges the battery.

Question 30

What is regenerative braking?

  1. Using the electric motor as a generator during braking to recover energy into the battery
  2. Braking that heats the discs more
  3. Braking with air
  4. Braking with sand
Show answer & solution

Answer: (A) Using the electric motor as a generator during braking to recover energy into the battery

It is used in hybrid and electric vehicles.

Question 31

What is the function of the universal joints on a propeller shaft?

  1. To brake the vehicle
  2. To change gear ratio
  3. To support weight
  4. To allow power transmission through changing angles between gearbox and axle
Show answer & solution

Answer: (D) To allow power transmission through changing angles between gearbox and axle

Hooke's joints are commonly used.

Question 32

What is a fluid flywheel?

  1. A fluid coupling that transmits engine power to the gearbox through oil without mechanical contact
  2. A heavy solid flywheel
  3. A brake drum
  4. A clutch plate
Show answer & solution

Answer: (A) A fluid coupling that transmits engine power to the gearbox through oil without mechanical contact

It gives smooth starting but no torque multiplication.

Question 33

Why are leaf springs commonly used in trucks?

  1. They are strong, simple and can locate the axle as well as support heavy loads
  2. They need no mounting
  3. They are the lightest springs
  4. They give the softest ride
Show answer & solution

Answer: (A) They are strong, simple and can locate the axle as well as support heavy loads

Cars mostly use coil springs.

Question 34

What is the purpose of power steering?

  1. To brake the vehicle
  2. To reduce the effort needed by the driver to turn the steering wheel
  3. To increase speed
  4. To change gears
Show answer & solution

Answer: (B) To reduce the effort needed by the driver to turn the steering wheel

It may be hydraulic or electric.

Question 35

What is a tubeless tyre?

  1. A tyre without tread
  2. A solid rubber tyre
  3. A tyre with two tubes
  4. A tyre that holds air without an inner tube, sealed against the rim
Show answer & solution

Answer: (D) A tyre that holds air without an inner tube, sealed against the rim

It deflates slowly when punctured.

Question 36

What is brake fade?

  1. Leakage of brake fluid only
  2. Locking of wheels
  3. Loss of braking effectiveness due to overheating of brakes
  4. Wear of the brake pedal
Show answer & solution

Answer: (C) Loss of braking effectiveness due to overheating of brakes

Disc brakes resist fade better than drum brakes.

Question 37

What does the oxygen (lambda) sensor in the exhaust do?

  1. It measures engine speed
  2. It measures exhaust temperature
  3. It measures oxygen content so the ECU can keep the air–fuel ratio near stoichiometric
  4. It cools the exhaust
Show answer & solution

Answer: (C) It measures oxygen content so the ECU can keep the air–fuel ratio near stoichiometric

This is needed for the catalytic converter to work well.

Practice these 37 questions interactively →