What is thermal radiation?
Show answer & solution
Answer: (B) Electromagnetic radiation emitted by a body because of its temperature
Thermal radiation lies mainly in the wavelength range of about 0.1–100 μm.
Mechanical Engineering · Heat Transfer
45 questions, each with the answer and a worked solution.
Practice interactively and track your score →What is thermal radiation?
Answer: (B) Electromagnetic radiation emitted by a body because of its temperature
Thermal radiation lies mainly in the wavelength range of about 0.1–100 μm.
Does radiation need a medium to transfer heat?
Answer: (C) No, it can travel through a vacuum
Radiation travels at the speed of light.
What is the relation between absorptivity (α), reflectivity (ρ) and transmissivity (τ) of a surface?
Answer: (A) α + ρ + τ = 1
The incident energy is either absorbed, reflected or transmitted.
When is a body called a black body?
Answer: (D) When it absorbs all incident radiation (α = 1, ρ = 0, τ = 0)
A black body is also a perfect emitter.
When is a body called a white body?
Answer: (A) When it reflects all incident radiation (ρ = 1, α = 0, τ = 0)
A perfectly white body does not absorb any radiation.
When is a body called transparent (diathermanous)?
Answer: (C) When it transmits all incident radiation (τ = 1, α = 0, ρ = 0)
Air is nearly transparent to thermal radiation.
When is a body called opaque?
Answer: (D) When it transmits no radiation (τ = 0, so α + ρ = 1)
Most solids are opaque to thermal radiation.
What is a grey body?
Answer: (B) A body whose emissivity is less than 1 and is the same at all wavelengths and temperatures
Its absorptivity equals its emissivity.
What is the emissivity of a surface?
Answer: (A) The ratio of the energy emitted by the surface to that emitted by a black body at the same temperature
Its value lies between 0 and 1.
What is absorptivity?
Answer: (D) The ratio of radiation absorbed by a body to the total radiation falling on it
For a black body, absorptivity is 1.
Which surface has a very low emissivity?
Answer: (C) Highly polished silver
Polished metals have emissivities of only a few percent.
What does the Stefan–Boltzmann law state?
Answer: (B) The total energy emitted by a black body per unit area is proportional to the fourth power of its absolute temperature
E = σT⁴.
What is the value of the Stefan–Boltzmann constant?
Answer: (B) 5.67 × 10⁻⁸ W/m²·K⁴
Its unit is W/m²·K⁴.
By what factor does the emissive power of a black body increase when its temperature rises from 27 °C to 627 °C?
Answer: (D) 81
(900/300)⁴ = 3⁴ = 81.
What does Wien's displacement law state?
Answer: (C) The wavelength at which emission is maximum is inversely proportional to absolute temperature (λmax T = constant)
λmax T ≈ 2898 μm·K.
What happens to the wavelength of maximum emission as a body becomes hotter?
Answer: (A) It shifts to shorter wavelengths
Hot metal glows red, then yellow, then white.
What does Planck's law describe?
Answer: (C) The spectral distribution of energy emitted by a black body at each wavelength
It applies to black bodies.
What is the unit of Planck's constant?
Answer: (A) Joule-second
h ≈ 6.626 × 10⁻³⁴ J·s.
What does Kirchhoff's law of radiation state?
Answer: (B) At thermal equilibrium, the emissivity of a body equals its absorptivity
Good absorbers are good emitters.
According to Kirchhoff's law, what is the ratio of emissive power to absorptivity equal to for all bodies?
Answer: (D) The emissive power of a black body at the same temperature
It is the same for all bodies at the same temperature.
What does Prevost's theory of heat exchange state?
Answer: (C) All bodies above absolute zero continuously emit radiation, regardless of their surroundings
At equilibrium, emitted and absorbed energies are equal.
What does Lambert's cosine law state?
Answer: (A) The radiation intensity from a diffuse surface in any direction is proportional to the cosine of the angle from the normal
Diffuse surfaces obey this law.
What is intensity of radiation?
Answer: (D) The energy emitted per unit area per unit time per unit solid angle in a given direction
It is used in describing directional radiation.
What is the view (shape) factor in radiation?
Answer: (B) The fraction of radiation leaving one surface that directly reaches another surface
It depends only on geometry.
What is the reciprocity relation for view factors?
Answer: (D) A₁F₁₂ = A₂F₂₁
It is used to find unknown view factors.
What is the view factor of a flat or convex surface to itself?
Answer: (A) Zero
A flat or convex surface cannot see itself.
What is the net radiation exchange per unit area between two large parallel grey plates?
Answer: (B) σ(T₁⁴ − T₂⁴)/(1/ε₁ + 1/ε₂ − 1)
For black plates, the denominator becomes 1.
What is the purpose of a radiation shield?
Answer: (C) To reduce radiation heat transfer between two surfaces by placing a thin, low-emissivity sheet between them
Thermos flasks and spacecraft use radiation shields.
By how much does one radiation shield of the same emissivity reduce radiation between two large parallel plates?
Answer: (A) To half
With n shields, transfer reduces to 1/(n + 1).
Why are the walls of a thermos flask silvered and separated by a vacuum?
Answer: (D) Silvering reduces radiation and the vacuum prevents conduction and convection
It keeps hot drinks hot and cold drinks cold.
Which gases in the atmosphere absorb and emit thermal radiation significantly?
Answer: (C) Carbon dioxide and water vapour
Symmetric molecules like O₂ and N₂ are nearly transparent.
Why does a glass greenhouse stay warm?
Answer: (B) Glass transmits short-wave solar radiation but blocks long-wave radiation from objects inside
This is the greenhouse effect.
What is the approximate solar constant?
Answer: (D) About 1360 W/m²
It is the solar energy received per unit area outside Earth's atmosphere.
A body reflects 40% of incident radiation and has a transmissivity of 0.15. What is its emissivity?
Answer: (C) 0.45
α = 1 − 0.4 − 0.15 = 0.45, and emissivity equals absorptivity.
Two balls of the same material and finish have diameters in the ratio 2:1 and are cooled by radiation from the same temperature. What is the ratio of their initial cooling rates?
Answer: (A) 1:2
Cooling rate ∝ area/volume ∝ 1/d.
By which mode of heat transfer does a person sitting in front of a fireplace receive most heat?
Answer: (B) Radiation
Radiation travels in straight lines without heating the air in between.
On what does the emissive power of a body depend?
Answer: (C) Its temperature, surface nature and emissivity
Polished surfaces emit far less than rough dark surfaces.
Why do objects at room temperature not glow visibly?
Answer: (D) Most of their radiation is in the infrared, outside the visible range
Bodies begin to glow red at about 500–600 °C.
What is the wavelength of maximum solar radiation, approximately?
Answer: (A) About 0.5 μm (visible light)
The Sun's surface is at about 5800 K.
What is a diffuse surface in radiation?
Answer: (C) A surface that emits or reflects radiation equally in all directions
Rough surfaces behave nearly diffusely.
What is a specular surface?
Answer: (B) A mirror-like surface that reflects radiation at an angle equal to the angle of incidence
Polished metals behave nearly specularly.
What is irradiation in radiation heat transfer?
Answer: (C) The total radiation incident on a surface per unit area per unit time
Radiosity is the total radiation leaving a surface.
What is radiosity?
Answer: (D) The total radiation leaving a surface per unit area per unit time, including emitted and reflected radiation
It is used in network methods for radiation exchange.
Why are solar water heater collectors painted black?
Answer: (A) Black surfaces have high absorptivity for solar radiation
Selective coatings absorb well but emit little infrared.
Why are cold storage and fuel tank surfaces often painted white or silver?
Answer: (A) To reflect solar radiation and reduce heat gain
Low absorptivity keeps them cooler.