Engineering, Management, Agriculture and Veterinary MCQs are now live. FPSC, PPSC, EPE, IELTS & GRE coming soon.

Machine Design: Shafts and Springs

Mechanical Engineering · Machine Design

33 questions, each with the answer and a worked solution.

Practice interactively and track your score →
Question 1

What is a shaft?

  1. A bearing
  2. A stationary member that supports loads
  3. A spring
  4. A rotating machine element that transmits power
Show answer & solution

Answer: (D) A rotating machine element that transmits power

An axle is a non-rotating or lightly loaded member supporting wheels.

Question 2

What is the difference between a shaft and an axle?

  1. An axle transmits more torque
  2. They are the same
  3. A shaft transmits torque, while an axle mainly supports rotating parts and is subjected to bending
  4. A shaft never rotates
Show answer & solution

Answer: (C) A shaft transmits torque, while an axle mainly supports rotating parts and is subjected to bending

A spindle is a short shaft in machine tools.

Question 3

Which materials are commonly used for ordinary transmission shafts?

  1. Cast iron
  2. Mild steel and medium carbon steel
  3. Copper
  4. Aluminium
Show answer & solution

Answer: (B) Mild steel and medium carbon steel

Alloy steels are used for high-strength shafts.

Question 4

For a shaft subjected to combined bending moment M and torque T, what is the equivalent twisting moment?

  1. √(M² + T²)
  2. M + T
  3. M − T
  4. (M + T)/2
Show answer & solution

Answer: (A) √(M² + T²)

It is used with the maximum shear stress theory.

Question 5

For a shaft subjected to combined bending moment M and torque T, what is the equivalent bending moment?

  1. M + T
  2. √(M² + T²)
  3. M/2
  4. ½[M + √(M² + T²)]
Show answer & solution

Answer: (D) ½[M + √(M² + T²)]

It is used with the maximum normal stress theory.

Question 6

What is the diameter of a solid shaft required to transmit torque T at an allowable shear stress τ?

  1. d = 32T/πτ
  2. d = 16T/πτ
  3. d = ∛(16T/πτ)
  4. d = √(T/τ)
Show answer & solution

Answer: (C) d = ∛(16T/πτ)

It comes from τ = 16T/πd³.

Question 7

Why are hollow shafts used in aircraft and automobiles?

  1. They have a higher strength-to-weight ratio than solid shafts
  2. They are stronger in tension only
  3. They are cheaper to make
  4. They are easier to machine
Show answer & solution

Answer: (A) They have a higher strength-to-weight ratio than solid shafts

Material near the centre carries little torsional stress.

Question 8

What is the critical speed of a shaft?

  1. The speed for minimum stress
  2. The speed at which the shaft vibrates violently because rotation matches its natural frequency of transverse vibration
  3. The maximum speed of the motor
  4. The speed for maximum power
Show answer & solution

Answer: (B) The speed at which the shaft vibrates violently because rotation matches its natural frequency of transverse vibration

Operating speeds must be kept away from it.

Question 9

What is the function of a spring?

  1. To absorb energy, cushion shocks, apply forces or store energy
  2. To reduce friction
  3. To transmit large torque
  4. To join plates permanently
Show answer & solution

Answer: (A) To absorb energy, cushion shocks, apply forces or store energy

Springs are used in valves, clutches, brakes and suspensions.

Question 10

What is the spring index?

  1. The number of coils
  2. The free length of the spring
  3. The ratio of mean coil diameter to wire diameter (C = D/d)
  4. The load per unit deflection
Show answer & solution

Answer: (C) The ratio of mean coil diameter to wire diameter (C = D/d)

A spring index between about 4 and 12 is practical.

Question 11

What is spring stiffness (spring rate)?

  1. The energy stored
  2. The number of active coils
  3. The ratio of coil diameter to wire diameter
  4. The load required to produce unit deflection
Show answer & solution

Answer: (D) The load required to produce unit deflection

k = W/δ.

Question 12

What stress is the wire of a closely coiled helical spring mainly subjected to when it is compressed or extended?

  1. Pure compression
  2. Torsional shear stress
  3. Pure bending
  4. Pure tension
Show answer & solution

Answer: (B) Torsional shear stress

The wire twists as the spring deflects.

Question 13

In a heavy closely coiled spring, how does shear stress on the inner face of the coil compare with the outer face?

  1. It is equal
  2. It is smaller
  3. It is zero
  4. It is larger
Show answer & solution

Answer: (D) It is larger

The Wahl factor accounts for curvature and direct shear.

Question 14

What is the Wahl stress factor used for?

  1. Correcting spring shear stress for coil curvature and direct shear
  2. Calculating spring length
  3. Calculating bolt load
  4. Calculating gear strength
Show answer & solution

Answer: (A) Correcting spring shear stress for coil curvature and direct shear

K = (4C − 1)/(4C − 4) + 0.615/C.

Question 15

What is the equivalent stiffness of two identical springs of stiffness K connected in series?

  1. 2K
  2. K/2
  3. 4K
  4. K
Show answer & solution

Answer: (B) K/2

1/k = 1/k₁ + 1/k₂.

Question 16

What is the equivalent stiffness of two identical springs of stiffness K connected in parallel?

  1. K/2
  2. K/4
  3. 2K
  4. K
Show answer & solution

Answer: (C) 2K

Stiffnesses add in parallel.

Question 17

What happens to the stiffness of each part when a helical spring is cut into two equal halves?

  1. It doubles
  2. It halves
  3. It becomes four times
  4. It stays the same
Show answer & solution

Answer: (A) It doubles

Stiffness is inversely proportional to the number of active coils.

Question 18

What is a laminated (leaf) spring?

  1. A spiral spring
  2. A spring made of several flat plates of different lengths clamped together, acting as a beam of uniform strength
  3. A helical spring
  4. A torsion bar
Show answer & solution

Answer: (B) A spring made of several flat plates of different lengths clamped together, acting as a beam of uniform strength

It is used in truck and railway suspensions.

Question 19

What is nipping in a leaf spring?

  1. Cutting the leaves
  2. Welding the leaves
  3. Hardening the leaves
  4. Pre-stressing the leaves by giving them different radii of curvature before assembly
Show answer & solution

Answer: (D) Pre-stressing the leaves by giving them different radii of curvature before assembly

It equalises stresses in full-length and graduated leaves.

Question 20

Which material is commonly used for helical springs?

  1. Mild steel
  2. Cast iron
  3. High-carbon spring steel, such as oil-tempered or music wire
  4. Aluminium
Show answer & solution

Answer: (C) High-carbon spring steel, such as oil-tempered or music wire

Spring steels have high elastic limits.

Question 21

What is the solid length of a helical compression spring?

  1. The length of the wire
  2. The length under working load
  3. The length when the spring is compressed so that all coils touch
  4. The free length
Show answer & solution

Answer: (C) The length when the spring is compressed so that all coils touch

Solid length = number of total coils × wire diameter.

Question 22

Why are shafts often stepped (different diameters along their length)?

  1. To reduce cost only
  2. To make them weaker
  3. To make them flexible
  4. To locate bearings, gears and pulleys and to match strength to the bending moment
Show answer & solution

Answer: (D) To locate bearings, gears and pulleys and to match strength to the bending moment

Fillets at steps reduce stress concentration.

Question 23

What is the ASME code equation used for in shaft design?

  1. Designing gears only
  2. Designing springs
  3. Including shock and fatigue factors (Km and Kt) for combined bending and torsion
  4. Designing bolts
Show answer & solution

Answer: (C) Including shock and fatigue factors (Km and Kt) for combined bending and torsion

The factors account for the nature of loading.

Question 24

How does the torque capacity of a shaft change if its diameter is doubled, for the same allowable stress?

  1. It stays the same
  2. It becomes eight times
  3. It becomes four times
  4. It doubles
Show answer & solution

Answer: (B) It becomes eight times

T ∝ d³.

Question 25

What is the torsional rigidity criterion in shaft design?

  1. Limiting bending stress only
  2. Limiting speed
  3. Limiting weight only
  4. Limiting the angle of twist per unit length to a permissible value
Show answer & solution

Answer: (D) Limiting the angle of twist per unit length to a permissible value

A common limit is about 0.25° per metre for machine shafts.

Question 26

What is the free length of a helical compression spring?

  1. The length of the spring when no load acts on it
  2. The length of the wire
  3. The length when fully compressed
  4. The length under working load
Show answer & solution

Answer: (A) The length of the spring when no load acts on it

It includes solid length, maximum deflection and clearance between coils.

Question 27

What is buckling of a compression spring?

  1. Sideways bending of a long, slender compression spring under load
  2. Breaking of the wire
  3. Corrosion of coils
  4. Stretching of the spring
Show answer & solution

Answer: (A) Sideways bending of a long, slender compression spring under load

Long springs are guided by rods or sleeves to prevent it.

Question 28

What is the energy stored in a spring of stiffness k compressed by δ?

  1. ½kδ
  2. ½kδ²
  3. kδ
  4. kδ²
Show answer & solution

Answer: (B) ½kδ²

Springs act as energy stores in clocks and toys.

Question 29

What is surge in helical springs?

  1. Spring buckling
  2. Static deflection
  3. Spring breaking
  4. Resonant vibration of the spring when the loading frequency matches its natural frequency
Show answer & solution

Answer: (D) Resonant vibration of the spring when the loading frequency matches its natural frequency

It occurs in engine valve springs at high speeds.

Question 30

What is shot peening of springs used for?

  1. Reducing stiffness
  2. Coating against corrosion only
  3. Increasing the fatigue life of spring wire by creating compressive surface stresses
  4. Cleaning the springs only
Show answer & solution

Answer: (C) Increasing the fatigue life of spring wire by creating compressive surface stresses

It is common for valve and suspension springs.

Question 31

What is a torsion bar spring?

  1. A disc spring
  2. A straight bar fixed at one end and twisted at the other, acting as a spring
  3. A leaf spring
  4. A coiled spring
Show answer & solution

Answer: (B) A straight bar fixed at one end and twisted at the other, acting as a spring

It is used in some vehicle suspensions.

Question 32

What is a Belleville spring?

  1. A conical disc spring that gives high load with small deflection
  2. A coil spring
  3. A torsion bar
  4. A leaf spring
Show answer & solution

Answer: (A) A conical disc spring that gives high load with small deflection

Stacks of Belleville springs are used in clutches and bolted joints.

Question 33

Which spring is used in clocks and watches?

  1. Belleville spring
  2. Leaf spring
  3. Closely coiled helical compression spring
  4. Flat spiral spring
Show answer & solution

Answer: (D) Flat spiral spring

It stores energy when wound.

Practice these 33 questions interactively →