Engineering, Management, Agriculture and Veterinary MCQs are now live. FPSC, PPSC, EPE, IELTS & GRE coming soon.

Utilisation & Electrical Installation: Tariffs and Energy Management

Electrical Engineering · Utilisation & Electrical Installation

26 questions, each with the answer and a worked solution.

Practice interactively and track your score →
Question 1

What is a flat rate tariff?

  1. A free supply
  2. A tariff based on maximum demand
  3. A tariff with peak pricing
  4. A tariff charging a fixed rate per unit regardless of consumption
Show answer & solution

Answer: (D) A tariff charging a fixed rate per unit regardless of consumption

It is simple but does not reflect cost of supply.

Question 2

What is a two-part tariff?

  1. A tariff with a fixed charge related to demand and a running charge based on energy used
  2. A tariff with two meters only
  3. A tariff for two months
  4. A tariff with no fixed charge
Show answer & solution

Answer: (A) A tariff with a fixed charge related to demand and a running charge based on energy used

Industrial consumers usually pay demand (kW or kVA) and energy charges.

Question 3

What is a block rate tariff?

  1. A tariff with one rate
  2. A tariff in which different rates apply to successive blocks of energy consumed
  3. A tariff for street lights only
  4. A tariff based only on demand
Show answer & solution

Answer: (B) A tariff in which different rates apply to successive blocks of energy consumed

Pakistan's residential tariffs use consumption slabs.

Question 4

What is a time-of-use (TOU) tariff?

  1. A tariff based on cable size
  2. A tariff based on voltage only
  3. A tariff with different rates for peak and off-peak hours
  4. A flat rate tariff
Show answer & solution

Answer: (C) A tariff with different rates for peak and off-peak hours

It encourages shifting loads away from peak hours.

Question 5

Why do utilities apply power factor penalties to industrial consumers?

  1. To reduce voltage
  2. To encourage low power factor
  3. Low power factor increases current and losses in the supply system
  4. To increase frequency
Show answer & solution

Answer: (C) Low power factor increases current and losses in the supply system

Consumers correct power factor with capacitor banks.

Question 6

How does a higher load factor affect the cost per unit of electricity?

  1. It reduces the cost per unit because fixed costs are spread over more energy
  2. It has no effect
  3. It doubles fuel cost
  4. It increases the cost per unit
Show answer & solution

Answer: (A) It reduces the cost per unit because fixed costs are spread over more energy

Base-load consumers often get better tariffs.

Question 7

What is the monthly bill for 300 units at Rs 30 per unit, ignoring taxes and fixed charges?

  1. Rs 3,000
  2. Rs 330
  3. Rs 90,000
  4. Rs 9,000
Show answer & solution

Answer: (D) Rs 9,000

300 × 30 = 9,000.

Question 8

How much energy is saved per month by replacing a 50 W lamp with a 10 W LED used 10 hours a day for 30 days?

  1. 1.2 kWh
  2. 12 kWh
  3. 40 kWh
  4. 120 kWh
Show answer & solution

Answer: (B) 12 kWh

40 W × 10 h × 30 = 12,000 Wh.

Question 9

What is an energy audit?

  1. A tariff calculation
  2. A systematic study of energy use to identify savings opportunities
  3. An insulation test
  4. A financial audit only
Show answer & solution

Answer: (B) A systematic study of energy use to identify savings opportunities

Audits examine lighting, motors, HVAC and processes.

Question 10

What is demand-side management?

  1. Raising tariffs only
  2. Increasing generation only
  3. Measures by utilities and consumers to change the timing and amount of electricity use
  4. Building transmission lines
Show answer & solution

Answer: (C) Measures by utilities and consumers to change the timing and amount of electricity use

It reduces peak demand and costs.

Question 11

What is the fuel price adjustment (FPA) in Pakistani electricity bills?

  1. A monthly adjustment reflecting the difference between actual and reference fuel costs of generation
  2. A tax on appliances
  3. A fixed charge
  4. A meter rent
Show answer & solution

Answer: (A) A monthly adjustment reflecting the difference between actual and reference fuel costs of generation

NEPRA determines FPA after public hearings.

Question 12

Which residential consumers are classified as protected under Pakistan's electricity tariffs?

  1. Commercial consumers only
  2. Consumers above 700 units
  3. All industrial consumers
  4. Consumers whose monthly consumption stays up to 200 units over the qualifying period
Show answer & solution

Answer: (D) Consumers whose monthly consumption stays up to 200 units over the qualifying period

Protected consumers pay lower slab rates.

Question 13

Which authority in Pakistan is responsible for promoting energy efficiency and conservation, including appliance labelling?

  1. National Energy Efficiency and Conservation Authority (NEECA)
  2. NEPRA
  3. PTA
  4. PEC
Show answer & solution

Answer: (A) National Energy Efficiency and Conservation Authority (NEECA)

NEECA works on standards and energy-saving programmes.

Question 14

What is maximum demand in tariff terms?

  1. The voltage of supply
  2. The connected load only
  3. The highest average power drawn over a specified interval, such as 30 minutes, during the billing period
  4. The total energy used
Show answer & solution

Answer: (C) The highest average power drawn over a specified interval, such as 30 minutes, during the billing period

Demand charges are based on it.

Question 15

Why is improving motor efficiency important for industrial energy saving?

  1. Efficiency has no effect
  2. Motors use very little energy
  3. It increases losses
  4. Motors consume a large share of industrial electricity
Show answer & solution

Answer: (D) Motors consume a large share of industrial electricity

Premium efficiency motors and VFDs save energy.

Question 16

What is the payback period of an energy-saving measure costing Rs 50,000 that saves Rs 10,000 per year?

  1. 0.2 years
  2. 5 years
  3. 10 years
  4. 50 years
Show answer & solution

Answer: (B) 5 years

50,000/10,000 = 5 years.

Question 17

What is connected load?

  1. The maximum demand
  2. The sum of the rated powers of all equipment connected to the supply
  3. The energy consumed
  4. The average load
Show answer & solution

Answer: (B) The sum of the rated powers of all equipment connected to the supply

Demand factor = maximum demand/connected load.

Question 18

What is load shifting?

  1. Moving electricity use from peak to off-peak periods
  2. Changing meter location
  3. Increasing peak demand
  4. Reducing all consumption
Show answer & solution

Answer: (A) Moving electricity use from peak to off-peak periods

TOU tariffs reward load shifting.

Question 19

What does a star rating or energy label on an appliance indicate?

  1. Its weight
  2. Its price
  3. Its colour
  4. Its relative energy efficiency
Show answer & solution

Answer: (D) Its relative energy efficiency

Higher-rated appliances use less energy for the same service.

Question 20

How can a factory reduce its maximum demand charges?

  1. By lowering power factor
  2. By running all machines together
  3. By staggering the starting of large loads and controlling peak demand
  4. By using more lighting at peak
Show answer & solution

Answer: (C) By staggering the starting of large loads and controlling peak demand

Demand controllers can shed non-essential loads.

Question 21

What is the main purpose of power factor correction capacitors at industrial plants?

  1. To reduce reactive power drawn from the supply, lowering current, losses and penalties
  2. To change frequency
  3. To increase reactive demand
  4. To reduce real power
Show answer & solution

Answer: (A) To reduce reactive power drawn from the supply, lowering current, losses and penalties

Automatic capacitor banks adjust with load.

Question 22

What is the cost of running a 1.5 kW air conditioner for 8 hours a day for 30 days at Rs 40 per unit?

  1. Rs 1,440
  2. Rs 14,400
  3. Rs 4,800
  4. Rs 48,000
Show answer & solution

Answer: (B) Rs 14,400

Energy = 1.5 × 8 × 30 = 360 kWh; cost = 360 × 40.

Question 23

What are peak hours in Pakistan's electricity tariff mainly associated with?

  1. Midnight only
  2. Midday only
  3. Evening hours when demand is highest
  4. Early morning only
Show answer & solution

Answer: (C) Evening hours when demand is highest

Peak-hour rates are higher for TOU consumers.

Question 24

What is the main benefit of using inverter-type air conditioners?

  1. They need no electricity
  2. They use more energy
  3. They vary compressor speed to match cooling demand, saving energy
  4. They work only in winter
Show answer & solution

Answer: (C) They vary compressor speed to match cooling demand, saving energy

Savings of 30–50% are often reported.

Question 25

What is the purpose of a fixed charge in a tariff?

  1. To charge for energy only
  2. To charge for fuel only
  3. To penalise low power factor only
  4. To recover costs of capacity and connection that do not depend on energy used
Show answer & solution

Answer: (D) To recover costs of capacity and connection that do not depend on energy used

It may be based on sanctioned load.

Question 26

What is sanctioned load in Pakistan's electricity connections?

  1. The meter rating only
  2. The maximum load approved by the DISCO for a consumer's connection
  3. The actual energy used
  4. The voltage level
Show answer & solution

Answer: (B) The maximum load approved by the DISCO for a consumer's connection

Exceeding it may lead to penalties or upgrade requirements.

Practice these 26 questions interactively →