What is the approximate threshold of perception of AC current through the human body?
Show answer & solution
Answer: (B) About 1 mA
Higher currents cause muscle contraction and danger.
Electrical Engineering · Utilisation & Electrical Installation
24 questions, each with the answer and a worked solution.
Practice interactively and track your score →What is the approximate threshold of perception of AC current through the human body?
Answer: (B) About 1 mA
Higher currents cause muscle contraction and danger.
At about what AC current does a person typically become unable to let go of a conductor?
Answer: (C) About 10 to 20 mA
This is the "let-go" threshold.
Which range of current through the chest can cause ventricular fibrillation?
Answer: (D) About 50 to 100 mA or more
This is why 30 mA RCDs are used for personal protection.
What mainly determines the severity of an electric shock?
Answer: (A) The magnitude of current through the body, its path and duration
Wet skin lowers body resistance and increases current.
What is extra-low voltage (ELV) under IEC standards for AC?
Answer: (D) Not exceeding 50 V AC
ELV is used in wet locations and for portable tools.
What is lockout–tagout (LOTO)?
Answer: (A) Isolating, locking and tagging energy sources so equipment cannot be energised during work
It prevents accidental re-energisation.
What is a permit-to-work system?
Answer: (C) A formal written system authorising specific work on equipment after it is made safe
It is used for high-voltage and hazardous work.
Why must overhead lines be earthed at the work site before linemen work on them?
Answer: (B) To discharge stored charge and protect against accidental energisation or induced voltage
Lines must first be isolated and tested dead.
What is arc flash?
Answer: (C) A dangerous release of heat and light from an electric arc during a fault
Arc-rated PPE and proper procedures reduce injuries.
What does a double-square symbol on an appliance indicate?
Answer: (A) Class II (double insulated) appliance that does not require an earth connection
Its live parts are separated by reinforced insulation.
What is a Class I electrical appliance?
Answer: (D) An appliance with basic insulation and an exposed metal body connected to protective earth
The earth connection is essential for safety.
Which type of fire extinguisher is suitable for fires in energised electrical equipment?
Answer: (B) Carbon dioxide or dry powder
Water conducts electricity.
What is the first action on finding a person in contact with a live conductor?
Answer: (C) Switch off the supply or separate the person using dry non-conducting material
Then give first aid and seek medical help.
Why should only insulated tools be used for live electrical work?
Answer: (D) To protect the worker from electric shock
Tools should be rated for the working voltage.
What are common causes of electrical fires in buildings?
Answer: (A) Overloaded circuits, loose connections and damaged insulation
Correct protection and maintenance prevent fires.
Why should ladders used near electrical equipment be made of non-conducting material?
Answer: (B) To prevent electric shock if the ladder touches live parts
Fibreglass ladders are recommended.
Why is flying kites with metallic string near overhead lines dangerous?
Answer: (B) The conductive string can carry current from the lines and cause electrocution and outages
Such incidents have caused fatalities and tripping of feeders.
What is the main purpose of safety clearances for overhead lines?
Answer: (A) To keep people, buildings and vehicles at a safe distance from live conductors
Clearances increase with voltage level.
What does "test before touch" mean in electrical safety?
Answer: (D) Always confirm with an approved tester that conductors are dead before working on them
Testers should be proved on a known live source before and after use.
What is the purpose of personal protective equipment such as insulating gloves for electricians?
Answer: (C) To provide a barrier against electric shock and burns
Gloves must be rated and tested regularly.
Why is it dangerous to use electrical appliances with wet hands?
Answer: (A) Wet skin greatly reduces body resistance, increasing shock current
Bathrooms need RCD protection.
What is equipotential bonding in bathrooms and kitchens?
Answer: (C) Connecting metal pipes and fixtures together and to earth so no dangerous voltage difference appears
It reduces touch voltages during faults.
What is the purpose of an earth leakage protection device in wet areas such as bathrooms?
Answer: (B) To disconnect supply quickly if leakage current flows through a person or to earth
30 mA RCDs are required in such locations.
Why should electrical work on DISCO lines be carried out only by authorised linemen?
Answer: (D) They are trained in isolation, earthing and safety procedures
Unauthorised work causes many fatal accidents.