On which principle does resistance heating work?
Show answer & solution
Answer: (C) Heat produced by current flowing through a resistance (Joule heating)
H = I²Rt.
Electrical Engineering · Utilisation & Electrical Installation
26 questions, each with the answer and a worked solution.
Practice interactively and track your score →On which principle does resistance heating work?
Answer: (C) Heat produced by current flowing through a resistance (Joule heating)
H = I²Rt.
Which material is commonly used for heating elements in electric heaters and ovens?
Answer: (D) Nichrome (nickel–chromium alloy)
It has high resistivity and resists oxidation at high temperature.
Which electric heating method is used to heat metals by eddy currents induced by an alternating magnetic field?
Answer: (C) Induction heating
It is used for melting, hardening and induction cookers.
Which heating method is used to heat insulating materials such as wood, plastics and food?
Answer: (B) Dielectric (high-frequency capacitive) heating
The material is placed between electrodes with a high-frequency field.
At what frequency do domestic microwave ovens operate?
Answer: (A) About 2.45 GHz
Water molecules absorb this energy and heat the food.
Which type of furnace is used for melting steel scrap in large quantities?
Answer: (D) Electric arc furnace
Graphite electrodes strike arcs to the charge.
What is the heat produced by a 1 kW heater operating for 2 hours?
Answer: (C) 7.2 MJ
1,000 W × 7,200 s = 7.2 × 10⁶ J.
About how much electrical energy is needed to heat 10 litres of water from 20 °C to 100 °C, ignoring losses?
Answer: (B) About 0.93 kWh
Q = 10 × 4.186 × 80 ≈ 3,349 kJ ≈ 0.93 kWh.
What is the main difference between core-type and coreless induction furnaces?
Answer: (A) A core-type furnace has an iron core linking the primary and the molten metal loop; a coreless furnace has no iron core
Coreless furnaces operate at medium frequencies.
What is spot welding?
Answer: (D) A resistance welding process joining sheets at points by passing high current through electrodes
It is widely used in car body manufacturing.
On which principle does resistance welding work?
Answer: (B) Heat generated by contact resistance and high current at the joint
Pressure is applied while the joint is heated.
What is the main characteristic of a welding transformer?
Answer: (C) Low secondary voltage and very high secondary current
Its open-circuit voltage is typically about 50–100 V.
What is the function of the coating (flux) on arc welding electrodes?
Answer: (A) To shield the weld pool from atmospheric contamination and stabilise the arc
It forms slag over the weld.
What is TIG welding?
Answer: (D) Arc welding using a non-consumable tungsten electrode and inert gas shielding
It gives high-quality welds on thin metals.
What is MIG welding?
Answer: (C) Arc welding with a continuously fed consumable wire electrode and shielding gas
It gives high productivity.
What is infrared heating mainly used for?
Answer: (D) Drying paint and heating surfaces directly by radiation
Infrared lamps heat objects without heating the air much.
Why is induction heating efficient for hardening steel parts?
Answer: (A) Heat is generated directly in the surface layer of the workpiece
Higher frequencies give shallower heating.
Which type of electric heating is used in an electric kettle?
Answer: (B) Direct resistance heating with an immersed element
The element is in direct contact with the water.
What is the main advantage of electric heating over fuel heating?
Answer: (B) Clean, precise temperature control with no combustion products at the point of use
Electric heating is also easy to automate.
What is the electrode material commonly used in electric arc furnaces?
Answer: (A) Graphite
Graphite withstands very high temperatures.
What is the resistance of a 2 kW heater element designed for 230 V?
Answer: (B) About 26.5 Ω
R = V²/P = 230²/2,000.
What is the main advantage of induction cookers?
Answer: (D) Fast, efficient heating because heat is generated directly in the cookware
Ferromagnetic cookware is required.
Which welding process is most widely used for general fabrication with coated electrodes?
Answer: (C) Shielded metal arc (stick) welding
It is simple and portable.
Why is DC preferred over AC for some arc welding work?
Answer: (B) It gives a more stable arc and better control of heat distribution
Electrode polarity changes penetration.
What is the purpose of a thermostat in an electric water heater?
Answer: (A) To switch the element off when the set temperature is reached
It saves energy and prevents overheating.
What is electric arc heating?
Answer: (D) Heating by an electric arc between electrodes or between an electrode and the charge
Arc temperatures exceed 3,000 °C.