Engineering, Management, Agriculture and Veterinary MCQs are now live. FPSC, PPSC, EPE, IELTS & GRE coming soon.

Power Systems: Transmission Lines

Electrical Engineering · Power Systems

38 questions, each with the answer and a worked solution.

Practice interactively and track your score →
Question 1

Why are transmission systems operated at high voltages?

  1. To reduce current and therefore line losses for the same power
  2. To improve load imbalance
  3. To eliminate reactive power
  4. To increase conductor resistance
Show answer & solution

Answer: (A) To reduce current and therefore line losses for the same power

Losses are I²R, and current falls as voltage rises.

Question 2

How do transmission line losses vary with transmission voltage for the same power and power factor?

  1. They are independent of voltage
  2. Directly with voltage
  3. Inversely with the square of the voltage
  4. With the square of voltage
Show answer & solution

Answer: (C) Inversely with the square of the voltage

Doubling voltage reduces losses to one quarter.

Question 3

What are the highest AC transmission voltages used in Pakistan's national grid?

  1. 33 kV and 11 kV
  2. 132 kV and 66 kV
  3. 500 kV and 220 kV
  4. 765 kV and 1,100 kV
Show answer & solution

Answer: (C) 500 kV and 220 kV

NTDC operates the 500 kV and 220 kV grid.

Question 4

What is the DC voltage of the Matiari–Lahore HVDC transmission line?

  1. ±500 kV
  2. ±220 kV
  3. ±800 kV
  4. ±660 kV
Show answer & solution

Answer: (D) ±660 kV

It is Pakistan's first HVDC line, commissioned in 2021.

Question 5

What power can the Matiari–Lahore HVDC line transmit under rated conditions?

  1. 2,000 MW
  2. 3,000 MW
  3. 4,000 MW
  4. 5,000 MW
Show answer & solution

Answer: (C) 4,000 MW

It carries power from southern coal plants to load centres in the north.

Question 6

Which conductor is most widely used for overhead transmission lines?

  1. Solid copper
  2. ACSR (aluminium conductor steel reinforced)
  3. Pure steel
  4. Hard-drawn silver
Show answer & solution

Answer: (B) ACSR (aluminium conductor steel reinforced)

The steel core gives strength and aluminium carries current.

Question 7

What is skin effect?

  1. The tendency of alternating current to flow near the surface of a conductor
  2. The flow of DC near the centre
  3. Corona discharge
  4. Heating of insulators
Show answer & solution

Answer: (A) The tendency of alternating current to flow near the surface of a conductor

It increases effective AC resistance, especially at high frequency and large diameter.

Question 8

What is corona in transmission lines?

  1. Lightning strike on towers
  2. Ionisation of air around conductors when the electric field exceeds the air's breakdown strength
  3. Sagging of lines
  4. Heating of conductors by current
Show answer & solution

Answer: (B) Ionisation of air around conductors when the electric field exceeds the air's breakdown strength

Corona produces a violet glow, hissing noise, ozone and power loss.

Question 9

Which conductor arrangement can reduce corona loss on extra-high-voltage lines?

  1. Closer phase spacing
  2. Uninsulated earth wires
  3. Smaller conductors
  4. Bundled conductors
Show answer & solution

Answer: (D) Bundled conductors

Bundling increases effective diameter and reduces surface field.

Question 10

How does wet weather affect corona loss?

  1. It increases corona loss
  2. It eliminates corona
  3. It has no effect
  4. It changes frequency
Show answer & solution

Answer: (A) It increases corona loss

Rain and fog lower the critical disruptive voltage.

Question 11

What is the Ferranti effect?

  1. Heating of conductors
  2. A rise in receiving-end voltage above sending-end voltage on a lightly loaded long line
  3. An increase in current at the sending end
  4. A fall in voltage at full load
Show answer & solution

Answer: (B) A rise in receiving-end voltage above sending-end voltage on a lightly loaded long line

It is caused by line charging capacitance.

Question 12

How are shunt reactors used on long EHV lines?

  1. To supply real power
  2. To reduce frequency
  3. To increase line capacitance
  4. To absorb reactive power and control overvoltages during light load
Show answer & solution

Answer: (D) To absorb reactive power and control overvoltages during light load

They counter the Ferranti effect.

Question 13

Up to about what length is an overhead line treated as a short line, neglecting capacitance?

  1. 10 km
  2. 80 km
  3. 240 km
  4. 500 km
Show answer & solution

Answer: (B) 80 km

Medium lines (80–240 km) use nominal T or π models.

Question 14

What is the relationship between the ABCD constants of a passive transmission network?

  1. AD − BC = 1
  2. A = B
  3. AB − CD = 1
  4. A + D = 1
Show answer & solution

Answer: (A) AD − BC = 1

For a symmetrical network A = D.

Question 15

What is the surge impedance of a lossless transmission line?

  1. √(LC)
  2. 1/√(LC)
  3. √(L/C)
  4. L/C
Show answer & solution

Answer: (C) √(L/C)

Typical overhead lines have surge impedances of about 400 Ω.

Question 16

What is surge impedance loading (SIL)?

  1. The power lost by corona
  2. The power at no load
  3. The maximum thermal rating
  4. The power delivered when a line is terminated in its surge impedance, V²/Zc
Show answer & solution

Answer: (D) The power delivered when a line is terminated in its surge impedance, V²/Zc

At SIL, reactive power generated and absorbed by the line balance.

Question 17

What is the formula for sag of a conductor between supports at equal levels?

  1. S = Tl²/w
  2. S = wl²/(8T)
  3. S = wl/T
  4. S = 8T/(wl²)
Show answer & solution

Answer: (B) S = wl²/(8T)

w is weight per unit length, l span and T horizontal tension.

Question 18

How does an increase in conductor temperature affect sag?

  1. The conductor breaks immediately
  2. Sag stays constant
  3. Sag decreases
  4. Sag increases
Show answer & solution

Answer: (D) Sag increases

Thermal expansion lengthens the conductor.

Question 19

Which type of insulator is used for overhead lines above about 33 kV?

  1. Glass bottles
  2. Pin insulators
  3. Suspension (disc) insulators
  4. Shackle insulators
Show answer & solution

Answer: (C) Suspension (disc) insulators

Disc strings can be extended for higher voltages.

Question 20

Why is string efficiency of suspension insulators less than 100%?

  1. Voltage is not distributed equally across the discs because of shunt capacitance to earth
  2. All discs carry equal voltage
  3. The discs are identical
  4. There is no voltage on the string
Show answer & solution

Answer: (A) Voltage is not distributed equally across the discs because of shunt capacitance to earth

The disc nearest the line conductor is most stressed.

Question 21

Which method improves the voltage distribution across a string of suspension insulators?

  1. Using copper conductors
  2. Using longer cross-arms only
  3. Using a guard (grading) ring
  4. Removing discs
Show answer & solution

Answer: (C) Using a guard (grading) ring

The guard ring adds capacitance that equalises voltage.

Question 22

What is the main purpose of the earth (shield) wire on top of transmission towers?

  1. To protect phase conductors from direct lightning strikes
  2. To reduce sag
  3. To support insulators
  4. To carry load current
Show answer & solution

Answer: (A) To protect phase conductors from direct lightning strikes

It is earthed at every tower.

Question 23

Why are transmission lines transposed?

  1. To increase corona
  2. To reduce tower height
  3. To increase sag
  4. To balance the inductance and capacitance of the three phases
Show answer & solution

Answer: (D) To balance the inductance and capacitance of the three phases

Each phase occupies each position for one-third of the length.

Question 24

Which law states that the most economical conductor size is when the annual cost of energy lost equals the annual interest and depreciation on the conductor cost?

  1. Faraday's law
  2. Kelvin's law
  3. Ohm's law
  4. Lenz's law
Show answer & solution

Answer: (B) Kelvin's law

It is used for choosing economic conductor cross-section.

Question 25

What is a major advantage of HVDC over HVAC for long-distance bulk transmission?

  1. Lower cost of converter stations
  2. Easy voltage transformation
  3. No need for insulation
  4. Lower losses and no reactive power or stability limit with distance
Show answer & solution

Answer: (D) Lower losses and no reactive power or stability limit with distance

HVDC also links asynchronous systems.

Question 26

Which HVDC link uses the earth or sea as its return path?

  1. Bipolar link
  2. Homopolar link only with two returns
  3. Monopolar link
  4. Back-to-back link
Show answer & solution

Answer: (C) Monopolar link

A bipolar link has positive and negative poles.

Question 27

What type of HVDC link is the Matiari–Lahore line?

  1. Bipolar link
  2. Back-to-back link
  3. Homopolar link
  4. Monopolar link
Show answer & solution

Answer: (A) Bipolar link

Bipolar links can operate on one pole if the other fails.

Question 28

What is a back-to-back HVDC station used for?

  1. Long-distance submarine transmission
  2. Connecting two AC systems at the same location that may have different frequencies or be unsynchronised
  3. Reducing corona
  4. Supplying DC loads only
Show answer & solution

Answer: (B) Connecting two AC systems at the same location that may have different frequencies or be unsynchronised

There is no long DC line in a back-to-back link.

Question 29

Which power electronic devices are used in conventional line-commutated HVDC converters?

  1. Thyristors
  2. Vacuum tubes
  3. Relays
  4. Diodes only
Show answer & solution

Answer: (A) Thyristors

Modern VSC-HVDC uses IGBTs.

Question 30

Which insulation material is widely used in modern high-voltage underground cables?

  1. Rubber
  2. Cross-linked polyethylene (XLPE)
  3. Cotton
  4. Paper only
Show answer & solution

Answer: (B) Cross-linked polyethylene (XLPE)

XLPE cables are lighter and need less maintenance than oil-filled cables.

Question 31

Why is the charging current of underground cables much larger than that of overhead lines?

  1. Cables have higher inductance
  2. Cables carry DC only
  3. Cables have higher resistance
  4. Cables have much higher capacitance
Show answer & solution

Answer: (D) Cables have much higher capacitance

This limits the length of long AC cables.

Question 32

Which test is used to locate a fault in an underground cable?

  1. Open-circuit test
  2. Swinburne's test
  3. Murray loop test
  4. Polarity test
Show answer & solution

Answer: (C) Murray loop test

It uses a Wheatstone bridge principle.

Question 33

What is the purpose of series capacitors in long transmission lines?

  1. To increase line reactance
  2. To reduce voltage
  3. To reduce effective line reactance and increase power transfer capability
  4. To absorb real power
Show answer & solution

Answer: (C) To reduce effective line reactance and increase power transfer capability

Series compensation improves stability.

Question 34

How does using bundled conductors affect line inductance?

  1. It increases line inductance
  2. It has no effect
  3. It makes inductance zero
  4. It reduces line inductance
Show answer & solution

Answer: (D) It reduces line inductance

A larger effective radius reduces reactance and increases capacity.

Question 35

What is proximity effect in conductors?

  1. Non-uniform current distribution caused by the magnetic field of nearby conductors
  2. Ionisation of air
  3. Sagging between towers
  4. Current flowing only in the centre
Show answer & solution

Answer: (A) Non-uniform current distribution caused by the magnetic field of nearby conductors

Like skin effect, it increases AC resistance.

Question 36

Which voltage levels does NTDC use at its grid stations to supply DISCOs?

  1. 11 kV only
  2. 33 kV only
  3. 220 kV and 132 kV
  4. 400 V only
Show answer & solution

Answer: (C) 220 kV and 132 kV

DISCOs then distribute power at 11 kV and 400/230 V.

Question 37

What is the main reason for using steel lattice towers for EHV lines?

  1. They need no foundations
  2. They insulate conductors
  3. They are strong and light for their height and carry heavy conductors over long spans
  4. They are the cheapest at low voltage
Show answer & solution

Answer: (C) They are strong and light for their height and carry heavy conductors over long spans

Tower design depends on voltage, conductor and terrain.

Question 38

What happens to line capacitance when the spacing between conductors increases?

  1. It becomes infinite
  2. It increases
  3. It stays the same
  4. It decreases
Show answer & solution

Answer: (D) It decreases

Capacitance per phase varies inversely with ln(D/r).

Practice these 38 questions interactively →