Engineering, Management, Agriculture and Veterinary MCQs are now live. FPSC, PPSC, EPE, IELTS & GRE coming soon.

Electrical Machines: Single-Phase and Special Motors

Electrical Engineering · Electrical Machines

35 questions, each with the answer and a worked solution.

Practice interactively and track your score →
Question 1

Why is a single-phase induction motor not self-starting?

  1. It has no rotor
  2. It runs only on DC
  3. Its rotor is too heavy
  4. A single winding produces a pulsating field with no net starting torque
Show answer & solution

Answer: (D) A single winding produces a pulsating field with no net starting torque

An auxiliary winding is needed to create a rotating field.

Question 2

Which theory explains the operation of single-phase induction motors?

  1. Superposition theory
  2. Thevenin's theory
  3. Double revolving field theory
  4. Two-reaction theory
Show answer & solution

Answer: (C) Double revolving field theory

The pulsating field is resolved into two equal fields rotating in opposite directions.

Question 3

How does a split-phase induction motor produce starting torque?

  1. By using a permanent magnet
  2. By using an auxiliary winding with higher resistance to create a phase difference
  3. By using a capacitor in the main winding only
  4. By using brushes
Show answer & solution

Answer: (B) By using an auxiliary winding with higher resistance to create a phase difference

It has moderate starting torque.

Question 4

Which single-phase motor has the highest starting torque among induction types?

  1. Shaded-pole motor
  2. Permanent split capacitor motor
  3. Split-phase motor
  4. Capacitor-start motor
Show answer & solution

Answer: (D) Capacitor-start motor

The start capacitor gives nearly 90° phase shift.

Question 5

Which single-phase motor type is commonly used in ceiling fans in Pakistan?

  1. DC series motor
  2. Permanent split capacitor (capacitor-run) motor
  3. Universal motor
  4. Stepper motor
Show answer & solution

Answer: (B) Permanent split capacitor (capacitor-run) motor

The run capacitor stays in circuit, giving quiet and efficient operation.

Question 6

What disconnects the starting winding of a capacitor-start motor at about 75% of rated speed?

  1. A centrifugal switch
  2. A fuse
  3. A contactor coil
  4. A thermal relay
Show answer & solution

Answer: (A) A centrifugal switch

This prevents the starting winding from overheating.

Question 7

What is the main feature of a shaded-pole motor?

  1. Very high starting torque
  2. DC operation only
  3. Very low starting torque, simple construction and low cost
  4. Use in heavy cranes
Show answer & solution

Answer: (C) Very low starting torque, simple construction and low cost

A copper shading ring on part of each pole creates a moving field.

Question 8

What is a universal motor?

  1. A stepper motor
  2. A series motor that can run on both AC and DC
  3. An induction motor
  4. A motor that runs only on DC
Show answer & solution

Answer: (B) A series motor that can run on both AC and DC

Universal motors run at high speeds in drills, mixers and vacuum cleaners.

Question 9

What is the step angle of a stepper motor with 200 steps per revolution?

  1. 0.9°
  2. 1.8°
  3. 3.6°
  4. 18°
Show answer & solution

Answer: (B) 1.8°

Step angle = 360°/200 = 1.8°.

Question 10

What is the main characteristic of a stepper motor?

  1. It cannot hold position
  2. It has a commutator
  3. It rotates in fixed angular steps in response to input pulses
  4. It runs at constant speed only on AC
Show answer & solution

Answer: (C) It rotates in fixed angular steps in response to input pulses

Steppers are used in printers and CNC machines without feedback.

Question 11

Which are the three main types of stepper motor?

  1. Variable reluctance, permanent magnet and hybrid
  2. Shunt, series and compound
  3. Split-phase, capacitor and shaded pole
  4. Squirrel cage, slip ring and double cage
Show answer & solution

Answer: (A) Variable reluctance, permanent magnet and hybrid

Hybrid steppers combine features of the other two.

Question 12

How is commutation achieved in a brushless DC (BLDC) motor?

  1. By a centrifugal switch
  2. With slip rings
  3. With carbon brushes
  4. Electronically, using rotor position sensors such as Hall sensors
Show answer & solution

Answer: (D) Electronically, using rotor position sensors such as Hall sensors

BLDC motors are efficient and need little maintenance.

Question 13

Where are BLDC or permanent-magnet synchronous motors commonly used today?

  1. Manual hand pumps
  2. Mechanical clocks only
  3. Old steam locomotives
  4. Inverter air conditioners, electric vehicles and efficient fans
Show answer & solution

Answer: (D) Inverter air conditioners, electric vehicles and efficient fans

They offer high efficiency and controllable speed.

Question 14

What produces torque in a reluctance motor?

  1. A commutator
  2. A permanent magnet
  3. The tendency of the rotor to align with the path of minimum reluctance
  4. A capacitor
Show answer & solution

Answer: (C) The tendency of the rotor to align with the path of minimum reluctance

It runs at synchronous speed without DC excitation.

Question 15

Which motor is used in electric clocks and record players because it runs quietly at constant synchronous speed?

  1. Hysteresis motor
  2. Shaded-pole motor only
  3. DC series motor
  4. Universal motor
Show answer & solution

Answer: (A) Hysteresis motor

Torque is produced by hysteresis in a hard magnetic rotor.

Question 16

What is a servo motor?

  1. A motor without any feedback
  2. A motor for fans only
  3. A large traction motor
  4. A motor used in closed-loop control systems for precise position or speed control
Show answer & solution

Answer: (D) A motor used in closed-loop control systems for precise position or speed control

Servo systems compare actual and desired positions.

Question 17

What is a linear induction motor?

  1. A stepper motor only
  2. A transformer
  3. A motor that produces linear motion instead of rotation
  4. A DC series motor
Show answer & solution

Answer: (C) A motor that produces linear motion instead of rotation

It is used in maglev trains, conveyors and sliding doors.

Question 18

What is a switched reluctance motor?

  1. A motor with salient poles on both stator and rotor and no rotor windings, controlled by electronic switching
  2. A universal motor
  3. A shaded-pole motor
  4. A motor with a commutator
Show answer & solution

Answer: (A) A motor with salient poles on both stator and rotor and no rotor windings, controlled by electronic switching

It is rugged and suits high-speed applications.

Question 19

What is a tachogenerator used for?

  1. Improving power factor
  2. Measuring speed by producing a voltage proportional to speed
  3. Starting motors
  4. Stepping motors
Show answer & solution

Answer: (B) Measuring speed by producing a voltage proportional to speed

Tachogenerators provide speed feedback in drives.

Question 20

How is the direction of rotation of a capacitor-start single-phase motor reversed?

  1. By removing the capacitor
  2. By reversing the supply plug
  3. By reversing the connections of either the main or the auxiliary winding
  4. By changing frequency
Show answer & solution

Answer: (C) By reversing the connections of either the main or the auxiliary winding

Reversing one winding reverses the rotating field.

Question 21

What is a synchro (selsyn) used for?

  1. Transmitting angular position electrically to a remote location
  2. Driving fans
  3. Charging batteries
  4. Measuring current
Show answer & solution

Answer: (A) Transmitting angular position electrically to a remote location

Synchros are used in control and instrumentation systems.

Question 22

What is a main advantage of brushless motors over brushed DC motors?

  1. Higher brush life
  2. Less maintenance and higher efficiency because there are no brushes or commutator
  3. Use of slip rings
  4. Lower cost of controller
Show answer & solution

Answer: (B) Less maintenance and higher efficiency because there are no brushes or commutator

No brush sparking also reduces electrical noise.

Question 23

Why is a capacitor connected in series with the auxiliary winding of a capacitor motor?

  1. To convert AC to DC
  2. To reduce speed
  3. To increase resistance
  4. To make the auxiliary winding current lead the main winding current
Show answer & solution

Answer: (D) To make the auxiliary winding current lead the main winding current

The phase difference creates a rotating field.

Question 24

What type of motor is commonly used in electric drills and grinders?

  1. Synchronous motor
  2. Shaded-pole motor
  3. Universal motor
  4. Hysteresis motor
Show answer & solution

Answer: (C) Universal motor

It gives high speed and high power for its size.

Question 25

What is the holding torque of a stepper motor?

  1. The torque needed to move the energised motor shaft from its stationary position
  2. The torque of the load
  3. The torque with no supply
  4. The torque at maximum speed
Show answer & solution

Answer: (A) The torque needed to move the energised motor shaft from its stationary position

Holding torque keeps position without feedback.

Question 26

What is the main use of a permanent-magnet synchronous motor (PMSM) in modern drives?

  1. Very low-cost toys only
  2. Welding
  3. Clocks only
  4. High-efficiency variable-speed drives such as electric vehicle traction
Show answer & solution

Answer: (D) High-efficiency variable-speed drives such as electric vehicle traction

PMSMs have magnets on the rotor and need an inverter.

Question 27

What is a repulsion motor?

  1. A synchronous motor
  2. A single-phase motor whose rotor has a commutator with short-circuited brushes
  3. A DC shunt motor
  4. A stepper motor
Show answer & solution

Answer: (B) A single-phase motor whose rotor has a commutator with short-circuited brushes

It has high starting torque but is now rarely used.

Question 28

Why does a shaded-pole motor rotate in only one direction?

  1. It is supplied with DC
  2. The shading ring fixes the direction of the moving field
  3. It has a centrifugal switch
  4. It has a commutator
Show answer & solution

Answer: (B) The shading ring fixes the direction of the moving field

Reversal requires changing the shading arrangement.

Question 29

What is the purpose of the shading ring in a shaded-pole motor?

  1. To reduce frequency
  2. To increase resistance of the main winding
  3. To act as a commutator
  4. To delay the flux in part of the pole and create a moving magnetic field
Show answer & solution

Answer: (D) To delay the flux in part of the pole and create a moving magnetic field

Induced current in the ring makes the shaded flux lag.

Question 30

What happens to the speed of a universal motor at no load?

  1. It stays exactly constant
  2. It becomes zero
  3. It equals synchronous speed
  4. It becomes very high
Show answer & solution

Answer: (D) It becomes very high

Like all series motors, it should be operated with a load or gearing.

Question 31

Why are capacitor-run motors quieter and more efficient than split-phase motors?

  1. They have no rotor
  2. The capacitor stays in circuit and gives a more uniform rotating field
  3. They run on DC
  4. They have no windings
Show answer & solution

Answer: (B) The capacitor stays in circuit and gives a more uniform rotating field

The run capacitor improves power factor too.

Question 32

Which motor type is commonly used in electric vehicle traction today?

  1. Permanent-magnet synchronous or induction motors fed by inverters
  2. Stepper motors
  3. Universal motors
  4. Shaded-pole motors
Show answer & solution

Answer: (A) Permanent-magnet synchronous or induction motors fed by inverters

Inverter-fed AC motors give high efficiency and regenerative braking.

Question 33

What is microstepping in stepper motors?

  1. Running the motor without pulses
  2. Using a commutator
  3. Dividing each full step into smaller steps by controlling winding currents
  4. Removing the rotor magnets
Show answer & solution

Answer: (C) Dividing each full step into smaller steps by controlling winding currents

Microstepping gives smoother motion and finer resolution.

Question 34

What is the main disadvantage of a stepper motor used without feedback?

  1. It cannot rotate
  2. It cannot reverse
  3. It may lose steps under excessive load without detection
  4. It needs brushes
Show answer & solution

Answer: (C) It may lose steps under excessive load without detection

Closed-loop steppers add encoders to detect missed steps.

Question 35

Which motor in household appliances is often replaced by a BLDC motor to save energy in modern fans?

  1. Synchronous condenser
  2. Single-phase capacitor-run induction motor
  3. DC series traction motor
  4. Universal motor in drills
Show answer & solution

Answer: (B) Single-phase capacitor-run induction motor

BLDC fans use much less power than conventional fans.

Practice these 35 questions interactively →