What is the synchronous speed of an induction motor with P poles on a supply of frequency f?
Show answer & solution
Answer: (C) Ns = 120f/P
The rotating field turns at synchronous speed.
Electrical Engineering · Electrical Machines
38 questions, each with the answer and a worked solution.
Practice interactively and track your score →What is the synchronous speed of an induction motor with P poles on a supply of frequency f?
Answer: (C) Ns = 120f/P
The rotating field turns at synchronous speed.
What is the synchronous speed of a 4-pole induction motor on a 50 Hz supply?
Answer: (C) 1,500 rpm
Ns = 120 × 50/4 = 1,500 rpm.
How is the slip of an induction motor defined?
Answer: (A) s = (Ns − N)/Ns
Slip is zero at synchronous speed and one at standstill.
What is the slip of a 4-pole, 50 Hz induction motor running at 1,440 rpm?
Answer: (C) 4%
s = (1500 − 1440)/1500 = 0.04.
What is the rotor current frequency of a 50 Hz induction motor running at 4% slip?
Answer: (B) 2 Hz
fr = s × f = 0.04 × 50 = 2 Hz.
Why can an induction motor never run at synchronous speed?
Answer: (A) At synchronous speed there is no relative motion, so no rotor emf, current or torque
Some slip is always needed to produce torque.
What is the main difference between squirrel-cage and slip-ring induction motors?
Answer: (D) Slip-ring motors have a wound rotor connected to external resistors through slip rings
External resistance improves starting torque in slip-ring motors.
Why are the rotor bars of a squirrel-cage induction motor skewed?
Answer: (A) To reduce magnetic noise, hum and cogging
Skewing also gives smoother torque.
When is the starting torque of an induction motor maximum?
Answer: (D) When rotor resistance equals rotor standstill reactance
This is why added rotor resistance improves starting torque.
At what slip does an induction motor develop its maximum torque?
Answer: (B) s = R2/X2
R2 and X2 are rotor resistance and standstill reactance.
How does rotor resistance affect the maximum (breakdown) torque of an induction motor?
Answer: (A) It does not change the maximum torque, only the slip at which it occurs
Maximum torque depends on supply voltage and rotor reactance.
How does the torque of an induction motor vary with supply voltage?
Answer: (B) With the square of the supply voltage
Low voltage greatly reduces starting torque.
By what percentage does torque fall if the supply voltage of an induction motor drops to 90%?
Answer: (C) About 19%
Torque ∝ V²; 0.9² = 0.81, so torque falls by 19%.
What is the starting current with a star–delta starter compared with direct-on-line starting?
Answer: (D) One-third
Starting torque is also reduced to one-third.
Which starting method is commonly used for small induction motors?
Answer: (D) Direct-on-line (DOL) starting
Small motors can tolerate the high starting current.
Which starting method is used with slip-ring induction motors?
Answer: (A) Adding external resistance in the rotor circuit
It reduces starting current and raises starting torque.
Which method is most widely used for variable speed control of modern induction motors?
Answer: (C) Variable frequency drive keeping V/f constant
VFDs save energy in pumps and fans.
Why is the air gap of an induction motor kept as small as possible?
Answer: (B) To reduce magnetising current and improve power factor
A large gap needs more magnetising current.
Why is the power factor of an induction motor low at no load?
Answer: (A) The current is mainly magnetising current
No-load power factor may be 0.1–0.3.
What is rotor copper loss in terms of slip s and air-gap power Pag?
Answer: (C) s × Pag
Mechanical power developed is (1 − s) × Pag.
What is the rotor copper loss of an induction motor with an air-gap power of 10 kW at 4% slip?
Answer: (B) 400 W
Rotor copper loss = 0.04 × 10,000 = 400 W.
What is crawling in an induction motor?
Answer: (D) Running stably at a low speed, about one-seventh of synchronous speed, due to harmonic torques
The seventh harmonic field causes crawling.
What is cogging in an induction motor?
Answer: (D) Failure to start because rotor and stator teeth lock magnetically
It occurs when rotor and stator slot numbers are equal; skewing helps prevent it.
What does the blocked-rotor test of an induction motor determine?
Answer: (B) Equivalent impedance and full-load copper loss
It is similar to the transformer short-circuit test.
What does the no-load test of an induction motor determine?
Answer: (C) Core loss, friction and windage losses and magnetising current
The motor runs uncoupled at rated voltage.
What is the advantage of a double-cage rotor?
Answer: (A) High starting torque with good running efficiency
The outer high-resistance cage dominates at start.
When does an induction machine work as a generator?
Answer: (C) When it is driven above synchronous speed, giving negative slip
Induction generators are used in some wind turbines.
Which motor is the most widely used in industry?
Answer: (A) Three-phase squirrel-cage induction motor
It is simple, rugged and cheap.
What is the typical full-load slip of a medium-sized induction motor?
Answer: (B) 2 to 5%
Slip increases with load.
How does torque vary with slip in the low-slip (normal running) region of an induction motor?
Answer: (D) Approximately in direct proportion to slip
The motor behaves almost like a shunt motor in this region.
What does an IE3 rating on an induction motor nameplate indicate?
Answer: (D) Premium efficiency class under IEC 60034-30
IEC efficiency classes range from IE1 to IE4 and above.
To which device is an induction motor often compared because of its working principle?
Answer: (B) A transformer with a rotating short-circuited secondary
Power is transferred across the air gap by induction.
Why is the rotor core of an induction motor laminated?
Answer: (A) To reduce eddy current loss
Rotor iron loss is small at low slip but laminations are still used.
What is plugging of an induction motor?
Answer: (C) Reversing two supply phases to stop the motor quickly
The rotor then runs against a reversed field.
How does an increase in rotor resistance affect the slip at maximum torque?
Answer: (B) The slip at maximum torque increases
This is used to obtain high starting torque in slip-ring motors.
What is the effect of running an induction motor at reduced voltage with full load?
Answer: (C) Slip and current increase, causing overheating
Low voltage reduces torque, so the motor slows and draws more current.
What is the purpose of a VFD's V/f control in an induction motor?
Answer: (D) To keep the air-gap flux nearly constant as speed is varied
Constant flux maintains torque capability.
Why is single-phasing dangerous for a running three-phase induction motor?
Answer: (B) The motor keeps running on two phases but draws excessive current and overheats
Single-phasing protection disconnects the motor.