What is the time constant of an RC circuit?
Show answer & solution
Answer: (B) RC
It is measured in seconds.
Electrical Engineering · Circuit Analysis
36 questions, each with the answer and a worked solution.
Practice interactively and track your score →What is the time constant of an RC circuit?
Answer: (B) RC
It is measured in seconds.
What is the time constant of an RL circuit?
Answer: (D) L/R
The current rises to 63.2% of its final value in one time constant.
To what percentage of its final voltage does a capacitor charge in one time constant?
Answer: (C) 63.2%
v = V(1 − e⁻¹) = 0.632V.
After about how many time constants is a capacitor considered fully charged in practice?
Answer: (C) 5
After 5τ the voltage is over 99% of its final value.
What is the time constant of an RC circuit with R = 10 kΩ and C = 100 µF?
Answer: (C) 1 s
τ = 10⁴ × 10⁻⁴ = 1 s.
What is the time constant of an RL circuit with L = 2 H and R = 10 Ω?
Answer: (B) 0.2 s
τ = L/R = 2/10 = 0.2 s.
Which expression gives the voltage across a capacitor charging from zero through R towards V?
Answer: (A) v = V(1 − e^(−t/RC))
The voltage rises exponentially to V.
To what percentage of its initial voltage does a discharging capacitor fall in one time constant?
Answer: (B) 36.8%
v = Ve⁻¹ ≈ 0.368V.
How does an uncharged capacitor behave at the instant a DC source is switched on?
Answer: (D) As a short circuit
Its voltage cannot change instantly, so it starts at zero.
How does an inductor with no initial current behave at the instant a DC source is switched on?
Answer: (A) As an open circuit
Its current cannot change instantly, so it starts at zero.
What is the complete response of a circuit equal to?
Answer: (D) The sum of the natural (transient) response and the forced (steady-state) response
The transient part dies out with time.
For a series RLC circuit, what is the damping coefficient α?
Answer: (B) R/(2L)
The undamped natural frequency is ω₀ = 1/√(LC).
When is a series RLC circuit overdamped?
Answer: (A) When α is greater than ω₀
The response returns to steady state without oscillation.
When is a series RLC circuit critically damped?
Answer: (D) When α equals ω₀
Critical damping gives the fastest response without overshoot.
What is the response of an underdamped RLC circuit?
Answer: (B) A decaying oscillation
Oscillation occurs at the damped frequency ωd.
What is the damped natural frequency of an underdamped RLC circuit?
Answer: (A) ωd = √(ω₀² − α²)
ωd is always less than ω₀.
What is the critical resistance of a series RLC circuit?
Answer: (D) 2√(L/C)
R = 2√(L/C) gives critical damping.
What is the characteristic equation of a source-free series RLC circuit?
Answer: (C) s² + (R/L)s + 1/(LC) = 0
Its roots determine the type of damping.
What happens in an ideal LC circuit with no resistance after it is disturbed?
Answer: (C) It oscillates indefinitely with constant amplitude
Without resistance there is no damping.
What is the Laplace transform of a unit step function?
Answer: (D) 1/s
The unit step is widely used as a test input.
What is the Laplace transform of a unit impulse function?
Answer: (B) 1
The impulse response defines the transfer function.
What is the Laplace transform of a unit ramp function?
Answer: (A) 1/s²
The ramp is the integral of the step.
What is the impedance of an inductor in the Laplace (s) domain with zero initial current?
Answer: (D) sL
A capacitor has s-domain impedance 1/(sC).
What is the impedance of a capacitor in the Laplace (s) domain with zero initial voltage?
Answer: (A) 1/(sC)
Laplace analysis turns differential equations into algebra.
What does the final value theorem give?
Answer: (B) The steady-state value of f(t) as t → ∞ from lim s→0 of sF(s)
It applies only when the final value exists.
What does the initial value theorem give?
Answer: (C) f(0⁺) from lim s→∞ of sF(s)
It finds initial conditions without solving the full response.
What is a transfer function?
Answer: (B) The ratio of the Laplace transform of the output to that of the input with zero initial conditions
Transfer functions describe linear time-invariant systems.
Why does opening a switch in a circuit carrying inductor current produce a high voltage spike?
Answer: (C) The rapid fall of current causes a large L di/dt
Freewheeling diodes and snubbers protect switches from these spikes.
What is the steady-state current in an inductor connected through 5 Ω to a 10 V DC source?
Answer: (B) 2 A
At DC steady state the inductor is a short circuit, so I = 10/5 = 2 A.
What is the energy stored in a 100 µF capacitor charged to 100 V?
Answer: (B) 0.5 J
W = ½ × 100 × 10⁻⁶ × 100² = 0.5 J.
What is the energy stored in a 2 H inductor carrying 3 A?
Answer: (C) 9 J
W = ½ × 2 × 3² = 9 J.
Under what condition does an RC circuit act as an integrator?
Answer: (D) When the output is taken across the capacitor and the time constant is large compared with the input period
An RC differentiator takes the output across R with a small time constant.
Why does the transient part of a circuit response die out with time?
Answer: (A) Energy is dissipated in the circuit resistance
Without resistance the natural response would not decay.
Why can the fault current of a power system initially contain a decaying DC component?
Answer: (D) The inductive current cannot change instantly, so a DC offset appears depending on the switching instant
This asymmetry raises the peak current that breakers must withstand.
What is a switching surge in a power system?
Answer: (A) A transient overvoltage caused by operating circuit breakers or switches
Switching surges matter for insulation design at extra-high voltages.
What is the voltage across a capacitor charging towards 10 V after one time constant, starting from zero?
Answer: (C) About 6.32 V
v = 10(1 − e⁻¹) ≈ 6.32 V.