Engineering, Management, Agriculture and Veterinary MCQs are now live. FPSC, PPSC, EPE, IELTS & GRE coming soon.

Circuit Analysis: Resonance and Filters

Electrical Engineering · Circuit Analysis

34 questions, each with the answer and a worked solution.

Practice interactively and track your score →
Question 1

What is the condition for resonance in a series RLC circuit?

  1. Voltage across R is zero
  2. Resistance equals reactance
  3. Inductive reactance equals capacitive reactance
  4. Current is zero
Show answer & solution

Answer: (C) Inductive reactance equals capacitive reactance

At resonance XL = XC.

Question 2

What is the resonant frequency of an LC circuit?

  1. f₀ = 1/(2π√(LC))
  2. f₀ = √(L/C)
  3. f₀ = 2π√(LC)
  4. f₀ = 1/(LC)
Show answer & solution

Answer: (A) f₀ = 1/(2π√(LC))

The same formula applies to ideal series and parallel LC circuits.

Question 3

What is the impedance of a series RLC circuit at resonance?

  1. Infinite
  2. Minimum and equal to R
  3. Maximum
  4. Zero always
Show answer & solution

Answer: (B) Minimum and equal to R

The reactances cancel.

Question 4

What is the current in a series RLC circuit at resonance?

  1. Maximum
  2. Equal to the current at any other frequency
  3. Minimum
  4. Zero
Show answer & solution

Answer: (A) Maximum

I = V/R at resonance.

Question 5

What is the power factor of a series RLC circuit at resonance?

  1. 0.5 lagging
  2. 0.5 leading
  3. Unity
  4. Zero
Show answer & solution

Answer: (C) Unity

The circuit is purely resistive at resonance.

Question 6

What is the quality factor Q of a series RLC circuit?

  1. ω₀RC
  2. LR
  3. R/(ω₀L)
  4. ω₀L/R
Show answer & solution

Answer: (D) ω₀L/R

Q = (1/R)√(L/C).

Question 7

How is the bandwidth of a resonant circuit related to its resonant frequency and quality factor?

  1. BW = Q/f₀
  2. BW = f₀/Q
  3. BW = f₀ + Q
  4. BW = Q × f₀
Show answer & solution

Answer: (B) BW = f₀/Q

High Q gives a narrow bandwidth.

Question 8

At the half-power frequencies of a series resonant circuit, what is the current?

  1. Zero
  2. Half the maximum current
  3. Equal to the maximum current
  4. 0.707 of the maximum current
Show answer & solution

Answer: (D) 0.707 of the maximum current

Power is half because it varies with the square of current.

Question 9

How is the resonant frequency related to the two half-power frequencies f₁ and f₂?

  1. f₀ = √(f₁f₂)
  2. f₀ = (f₁ + f₂)/2 exactly in all cases
  3. f₀ = f₂ − f₁
  4. f₀ = f₁f₂
Show answer & solution

Answer: (A) f₀ = √(f₁f₂)

f₀ is the geometric mean of the half-power frequencies.

Question 10

How does a higher quality factor affect a resonant circuit?

  1. It reduces the resonant frequency
  2. It gives a narrower bandwidth and better selectivity
  3. It has no effect
  4. It gives a wider bandwidth
Show answer & solution

Answer: (B) It gives a narrower bandwidth and better selectivity

Selectivity is the ability to pick one frequency from others.

Question 11

What is the impedance of an ideal parallel LC circuit at resonance?

  1. Minimum
  2. Equal to the inductive reactance
  3. Maximum (theoretically infinite)
  4. Zero
Show answer & solution

Answer: (C) Maximum (theoretically infinite)

The source current is minimum at parallel resonance.

Question 12

What is the dynamic impedance of a practical parallel resonant circuit with coil resistance R?

  1. L/(CR)
  2. CR/L
  3. LC/R
  4. R/LC
Show answer & solution

Answer: (A) L/(CR)

It is purely resistive at resonance.

Question 13

Why is a series resonant circuit called an acceptor circuit?

  1. It has infinite impedance
  2. It offers minimum impedance and accepts maximum current at resonance
  3. It rejects current at resonance
  4. It blocks all frequencies
Show answer & solution

Answer: (B) It offers minimum impedance and accepts maximum current at resonance

A parallel resonant circuit is called a rejector circuit.

Question 14

How does a series RLC circuit behave below its resonant frequency?

  1. It behaves inductively
  2. It behaves as an open circuit
  3. It behaves resistively
  4. It behaves capacitively
Show answer & solution

Answer: (D) It behaves capacitively

Below resonance XC is larger than XL.

Question 15

What is the approximate resonant frequency of a circuit with L = 10 mH and C = 1 µF?

  1. 1.59 kHz
  2. 15.9 kHz
  3. 50 Hz
  4. 159 Hz
Show answer & solution

Answer: (A) 1.59 kHz

f₀ = 1/(2π√(10⁻² × 10⁻⁶)) = 1/(2π × 10⁻⁴) ≈ 1,592 Hz.

Question 16

How does the resonant frequency change if the capacitance is made four times larger?

  1. It is doubled
  2. It becomes four times
  3. It is halved
  4. It is unchanged
Show answer & solution

Answer: (C) It is halved

f₀ is inversely proportional to √C.

Question 17

What is the quality factor of a circuit resonant at 1,000 Hz with a bandwidth of 50 Hz?

  1. 0.05
  2. 20
  3. 50
  4. 1,050
Show answer & solution

Answer: (B) 20

Q = f₀/BW = 1000/50 = 20.

Question 18

Which element provides damping in an RLC circuit?

  1. Ideal wire
  2. Capacitor
  3. Resistor
  4. Inductor
Show answer & solution

Answer: (C) Resistor

Resistance dissipates energy and reduces oscillation.

Question 19

What happens to energy in an RLC circuit at resonance?

  1. It is stored only in the resistor
  2. It is lost completely
  3. It stays in the source
  4. It oscillates between the inductor's magnetic field and the capacitor's electric field
Show answer & solution

Answer: (D) It oscillates between the inductor's magnetic field and the capacitor's electric field

The source supplies only the energy lost in R.

Question 20

What is the current in a series RLC circuit at resonance if V = 100 V and R = 10 Ω?

  1. 1 A
  2. 10 A
  3. 100 A
  4. 1,000 A
Show answer & solution

Answer: (B) 10 A

At resonance I = V/R.

Question 21

What is the voltage across the capacitor at resonance in a series circuit with Q = 10 and a supply of 20 V?

  1. 2 V
  2. 10 V
  3. 20 V
  4. 200 V
Show answer & solution

Answer: (D) 200 V

Voltage magnification: VC = QV.

Question 22

What is the relationship between the voltages across L and C in a series RLC circuit at resonance?

  1. VL is always twice VC
  2. They are in phase
  3. They are equal in magnitude and opposite in phase
  4. They are both zero
Show answer & solution

Answer: (C) They are equal in magnitude and opposite in phase

They cancel, leaving only the resistor voltage.

Question 23

Which phenomenon in power systems involves resonance between system capacitance and the non-linear inductance of a saturable transformer core?

  1. Ferroresonance
  2. Corona
  3. Ferranti effect
  4. Skin effect
Show answer & solution

Answer: (A) Ferroresonance

Ferroresonance can cause damaging overvoltages.

Question 24

Why are detuning reactors added in series with power factor correction capacitor banks?

  1. To increase harmonic currents
  2. To raise power factor above unity
  3. To avoid harmonic resonance between capacitors and system inductance
  4. To reduce capacitor rating
Show answer & solution

Answer: (C) To avoid harmonic resonance between capacitors and system inductance

Detuned banks shift resonance below dominant harmonics.

Question 25

What is the phase angle between voltage and current in a series RLC circuit at resonance?

  1. 90° lagging
  2. 90° leading
  3. 45°
  4. Zero
Show answer & solution

Answer: (D) Zero

The circuit is purely resistive.

Question 26

How does resistance affect the resonant frequency of an ideal series RLC circuit?

  1. It halves it
  2. It has no effect on the resonant frequency
  3. It doubles it
  4. It makes it zero
Show answer & solution

Answer: (B) It has no effect on the resonant frequency

f₀ depends only on L and C; R affects Q and bandwidth.

Question 27

What is the admittance of a parallel RLC circuit at resonance?

  1. Minimum and equal to the conductance G
  2. Maximum
  3. Infinite
  4. Equal to the susceptance
Show answer & solution

Answer: (A) Minimum and equal to the conductance G

The inductive and capacitive susceptances cancel.

Question 28

What type of filter is a series RLC circuit with the output taken across the resistor?

  1. Low-pass filter
  2. Band-stop filter
  3. High-pass filter
  4. Band-pass filter
Show answer & solution

Answer: (D) Band-pass filter

Maximum output occurs at the resonant frequency.

Question 29

What is the cut-off frequency of an RC low-pass filter?

  1. fc = R/C
  2. fc = 2πRC
  3. fc = 1/(2πRC)
  4. fc = RC
Show answer & solution

Answer: (C) fc = 1/(2πRC)

At cut-off the output is 0.707 of the input.

Question 30

What is the cut-off frequency of an RC filter with R = 1 kΩ and C = 1 µF?

  1. About 1.59 kHz
  2. About 15.9 Hz
  3. About 159 Hz
  4. About 1,000 Hz
Show answer & solution

Answer: (C) About 159 Hz

fc = 1/(2π × 1000 × 10⁻⁶) ≈ 159 Hz.

Question 31

By how many decibels does the output of a first-order filter fall at its cut-off frequency?

  1. 3 dB
  2. 6 dB
  3. 10 dB
  4. 20 dB
Show answer & solution

Answer: (A) 3 dB

The half-power point is −3 dB.

Question 32

Which filter allows high frequencies to pass and attenuates low frequencies?

  1. Band-stop filter
  2. High-pass filter
  3. All-pass filter only
  4. Low-pass filter
Show answer & solution

Answer: (B) High-pass filter

A series capacitor with output across a resistor forms a simple high-pass filter.

Question 33

What is the bandwidth of a series RLC circuit in terms of R and L, in rad/s?

  1. R/L
  2. RL
  3. L/R
  4. 1/(RL)
Show answer & solution

Answer: (A) R/L

In hertz, BW = R/(2πL).

Question 34

What is the quality factor of a resonant circuit a measure of?

  1. The resistance of the circuit
  2. The supply voltage
  3. The power factor
  4. The ratio of energy stored to energy dissipated per cycle
Show answer & solution

Answer: (D) The ratio of energy stored to energy dissipated per cycle

Q = 2π × (peak energy stored)/(energy lost per cycle).

Practice these 34 questions interactively →