Engineering, Management, Agriculture and Veterinary MCQs are now live. FPSC, PPSC, EPE, IELTS & GRE coming soon.

Circuit Analysis: DC Circuits

Electrical Engineering · Circuit Analysis

45 questions, each with the answer and a worked solution.

Practice interactively and track your score →
Question 1

What is the resistance of an electric iron that draws 2 A from a 120 V supply?

  1. 40 Ω
  2. 60 Ω
  3. 80 Ω
  4. 240 Ω
Show answer & solution

Answer: (B) 60 Ω

By Ohm's law, R = V/I = 120/2 = 60 Ω.

Question 2

What does Ohm's law state for a conductor at constant temperature?

  1. The power is constant
  2. The resistance increases with current
  3. The current is inversely proportional to the voltage
  4. The current through it is directly proportional to the voltage across it
Show answer & solution

Answer: (D) The current through it is directly proportional to the voltage across it

V = IR, where R is the constant of proportionality.

Question 3

What is the SI unit of electrical conductance?

  1. Farad
  2. Henry
  3. Siemens
  4. Ohm
Show answer & solution

Answer: (C) Siemens

Conductance G = 1/R and is measured in siemens (S).

Question 4

How is the resistance of a uniform conductor related to its length L, cross-sectional area A and resistivity ρ?

  1. R = ρL/A
  2. R = ρA/L
  3. R = LA/ρ
  4. R = ρ/(LA)
Show answer & solution

Answer: (A) R = ρL/A

Resistance increases with length and decreases with area.

Question 5

By what factor does the resistance of a wire change if it is stretched to twice its length with the same volume?

  1. It stays the same
  2. It doubles
  3. It halves
  4. It becomes four times
Show answer & solution

Answer: (D) It becomes four times

Length doubles and area halves, so R = ρ(2L)/(A/2) = 4R.

Question 6

How does the resistance of copper change as its temperature rises?

  1. It decreases
  2. It becomes zero
  3. It increases
  4. It remains constant
Show answer & solution

Answer: (C) It increases

Metals have a positive temperature coefficient of resistance.

Question 7

Which type of material has a negative temperature coefficient of resistance?

  1. Aluminium
  2. Semiconductors and carbon
  3. Copper
  4. Silver
Show answer & solution

Answer: (B) Semiconductors and carbon

Their resistance falls as temperature rises.

Question 8

What is common to all resistors connected in series?

  1. The same current flows through each
  2. Each has the same resistance
  3. The same power is dissipated in each
  4. The same voltage appears across each
Show answer & solution

Answer: (A) The same current flows through each

Series resistances add: Req = R1 + R2 + …

Question 9

What is common to all resistors connected in parallel?

  1. The same current flows through each
  2. The same voltage appears across each
  3. Each must have the same resistance
  4. The same power is dissipated in each
Show answer & solution

Answer: (B) The same voltage appears across each

1/Req = 1/R1 + 1/R2 + …

Question 10

What happens to the total resistance when identical resistors are connected in parallel?

  1. It becomes larger
  2. It becomes infinite
  3. It becomes smaller than any one resistor
  4. It remains unchanged
Show answer & solution

Answer: (C) It becomes smaller than any one resistor

n identical resistors R in parallel give R/n.

Question 11

What is the equivalent resistance of a 3 Ω and a 6 Ω resistor connected in parallel?

  1. 2 Ω
  2. 4.5 Ω
  3. 9 Ω
  4. 18 Ω
Show answer & solution

Answer: (A) 2 Ω

Req = (3 × 6)/(3 + 6) = 2 Ω.

Question 12

What does Kirchhoff's current law state?

  1. Power is conserved in each branch
  2. The sum of voltages in a loop is zero
  3. Current is proportional to voltage
  4. The algebraic sum of currents entering a node is zero
Show answer & solution

Answer: (D) The algebraic sum of currents entering a node is zero

KCL is based on conservation of charge.

Question 13

What does Kirchhoff's voltage law state?

  1. Voltage is proportional to current
  2. The sum of currents at a node is zero
  3. The algebraic sum of all voltages around a closed loop is zero
  4. Resistance is constant
Show answer & solution

Answer: (C) The algebraic sum of all voltages around a closed loop is zero

KVL is based on conservation of energy.

Question 14

What is the algebraic sum of power in a circuit at any instant of time?

  1. Zero
  2. Equal to the source voltage
  3. Always negative
  4. Always positive
Show answer & solution

Answer: (A) Zero

Total power supplied equals total power absorbed (conservation of energy).

Question 15

Which expression does not give the power dissipated in a resistor?

  1. P = VI
  2. P = V/I
  3. P = V²/R
  4. P = I²R
Show answer & solution

Answer: (B) P = V/I

Power in a resistor is VI, I²R or V²/R.

Question 16

What is the resistance of a 100 W lamp rated at 220 V?

  1. 2.2 Ω
  2. 48.4 Ω
  3. 220 Ω
  4. 484 Ω
Show answer & solution

Answer: (D) 484 Ω

R = V²/P = 220²/100 = 484 Ω.

Question 17

How many joules are there in one kilowatt-hour?

  1. 3.6 × 10⁶ J
  2. 1,000 J
  3. 3,600 J
  4. 36,000 J
Show answer & solution

Answer: (A) 3.6 × 10⁶ J

1 kWh = 1000 W × 3600 s = 3.6 MJ.

Question 18

How much energy does a 1 kW heater consume in 5 hours?

  1. 0.2 kWh
  2. 5 kWh
  3. 50 kWh
  4. 5,000 kWh
Show answer & solution

Answer: (B) 5 kWh

Energy = power × time = 1 × 5 = 5 kWh.

Question 19

In a voltage divider of R1 and R2 in series across V, what is the voltage across R2?

  1. V × R1/(R1 + R2)
  2. V × (R1 + R2)/R2
  3. V × R1/R2
  4. V × R2/(R1 + R2)
Show answer & solution

Answer: (D) V × R2/(R1 + R2)

The voltage divides in proportion to the resistances.

Question 20

In a current divider of R1 and R2 in parallel fed by current I, what is the current through R1?

  1. I × R1/(R1 + R2)
  2. I × R1/R2
  3. I × R2/(R1 + R2)
  4. I × (R1 + R2)/R1
Show answer & solution

Answer: (C) I × R2/(R1 + R2)

More current flows through the smaller resistance.

Question 21

What is the internal resistance of an ideal voltage source?

  1. Infinite
  2. Equal to the load resistance
  3. One ohm
  4. Zero
Show answer & solution

Answer: (D) Zero

An ideal voltage source keeps its voltage regardless of current.

Question 22

What is the internal resistance of an ideal current source?

  1. Equal to the load resistance
  2. Infinite
  3. Zero
  4. One ohm
Show answer & solution

Answer: (B) Infinite

An ideal current source delivers its current regardless of voltage.

Question 23

What is the voltage across an ideal short circuit?

  1. Zero
  2. Infinite
  3. Equal to the source voltage
  4. Undefined
Show answer & solution

Answer: (A) Zero

A short circuit has zero resistance.

Question 24

What is the current through an open circuit?

  1. Undefined
  2. Infinite
  3. Zero
  4. Equal to the short-circuit current
Show answer & solution

Answer: (C) Zero

An open circuit has infinite resistance.

Question 25

What is electric current?

  1. The opposition to charge flow
  2. The total charge stored
  3. The rate of flow of electric charge
  4. The energy per unit charge
Show answer & solution

Answer: (C) The rate of flow of electric charge

i = dq/dt, measured in amperes.

Question 26

Under the passive sign convention, when is power absorbed by an element positive?

  1. When current enters the element's positive voltage terminal
  2. When voltage is zero
  3. When current is zero
  4. When current leaves the positive terminal
Show answer & solution

Answer: (A) When current enters the element's positive voltage terminal

Positive p = vi means the element absorbs power.

Question 27

Which equation relates the charge q, capacitance C and voltage v of a capacitor?

  1. q = C²v
  2. q = Cv
  3. q² = Cv
  4. q = √(Cv)
Show answer & solution

Answer: (B) q = Cv

Capacitance is charge stored per volt.

Question 28

Which device stores electric charge in an electric field?

  1. Diode
  2. Resistor
  3. Inductor
  4. Capacitor
Show answer & solution

Answer: (D) Capacitor

Energy is stored in the electric field between the plates.

Question 29

How does a capacitor behave in a DC circuit at steady state?

  1. As an open circuit
  2. As a short circuit
  3. As a resistor of 1 Ω
  4. As a current source
Show answer & solution

Answer: (A) As an open circuit

Capacitor current i = C dv/dt is zero when voltage is constant.

Question 30

How does an inductor behave in a DC circuit at steady state?

  1. As an open circuit
  2. As a capacitor
  3. As a short circuit
  4. As a voltage source
Show answer & solution

Answer: (C) As a short circuit

Inductor voltage v = L di/dt is zero when current is constant.

Question 31

What is the energy stored in a capacitor C charged to voltage V?

  1. CV
  2. ½CV²
  3. CV²
  4. ½C²V
Show answer & solution

Answer: (B) ½CV²

The energy is stored in the electric field.

Question 32

What is the energy stored in an inductor L carrying current I?

  1. LI²
  2. ½L²I
  3. LI
  4. ½LI²
Show answer & solution

Answer: (D) ½LI²

The energy is stored in the magnetic field.

Question 33

How is the equivalent capacitance of capacitors in series calculated?

  1. 1/Ceq = 1/C1 + 1/C2 + …
  2. Ceq = C1 + C2 + …
  3. Ceq = C1 × C2
  4. Ceq = C1 − C2
Show answer & solution

Answer: (A) 1/Ceq = 1/C1 + 1/C2 + …

Capacitors combine in series like resistors in parallel.

Question 34

How is the equivalent inductance of uncoupled inductors in series calculated?

  1. Leq = L1 × L2
  2. 1/Leq = 1/L1 + 1/L2 + …
  3. Leq = L1 − L2
  4. Leq = L1 + L2 + …
Show answer & solution

Answer: (D) Leq = L1 + L2 + …

Inductors combine like resistors.

Question 35

Which circuit quantity cannot change instantaneously in a capacitor?

  1. Charge flow rate
  2. Voltage across it
  3. Current through it
  4. Power
Show answer & solution

Answer: (B) Voltage across it

An instant voltage change would need infinite current.

Question 36

Which circuit quantity cannot change instantaneously in an inductor?

  1. Rate of change of current
  2. Power
  3. Current through it
  4. Voltage across it
Show answer & solution

Answer: (C) Current through it

An instant current change would need infinite voltage.

Question 37

What is the fundamental theorem of network topology relating branches b, loops l and nodes n?

  1. b = l − n
  2. b = l + n + 1
  3. b = l + n − 1
  4. b = 2(l + n)
Show answer & solution

Answer: (C) b = l + n − 1

It gives the number of independent loops.

Question 38

On which law is nodal analysis based?

  1. Kirchhoff's current law
  2. Faraday's law
  3. Lenz's law
  4. Kirchhoff's voltage law
Show answer & solution

Answer: (A) Kirchhoff's current law

Nodal analysis writes KCL equations at non-reference nodes.

Question 39

On which law is mesh analysis based?

  1. Ampère's law
  2. Kirchhoff's voltage law
  3. Kirchhoff's current law
  4. Coulomb's law
Show answer & solution

Answer: (B) Kirchhoff's voltage law

Mesh analysis writes KVL equations around meshes.

Question 40

To which type of circuits can mesh analysis be applied directly?

  1. Non-planar circuits only
  2. Only AC circuits
  3. Circuits with no sources
  4. Planar circuits
Show answer & solution

Answer: (D) Planar circuits

A planar circuit can be drawn with no crossing branches.

Question 41

What is a supernode in nodal analysis?

  1. A node with many branches
  2. The reference node
  3. A region enclosing a voltage source connected between two non-reference nodes
  4. A node with a current source only
Show answer & solution

Answer: (C) A region enclosing a voltage source connected between two non-reference nodes

KCL is applied to the supernode as a whole.

Question 42

What is a supermesh in mesh analysis?

  1. The combination of two meshes that share a current source
  2. A mesh with no sources
  3. A mesh with a voltage source only
  4. The outer loop only
Show answer & solution

Answer: (A) The combination of two meshes that share a current source

The shared current source gives an extra constraint equation.

Question 43

What is a dependent source?

  1. A generator only
  2. A source whose value is controlled by another voltage or current in the circuit
  3. A battery
  4. A source that never changes
Show answer & solution

Answer: (B) A source whose value is controlled by another voltage or current in the circuit

Transistor and op-amp models use dependent sources.

Question 44

What is the terminal voltage of a 12 V battery with an internal resistance of 0.5 Ω delivering 4 A?

  1. 8 V
  2. 10 V
  3. 12 V
  4. 14 V
Show answer & solution

Answer: (B) 10 V

V = E − Ir = 12 − (4 × 0.5) = 10 V.

Question 45

What is the equivalent star resistance of each arm when three equal resistances of 30 Ω are connected in delta?

  1. 10 Ω
  2. 15 Ω
  3. 30 Ω
  4. 90 Ω
Show answer & solution

Answer: (A) 10 Ω

For equal resistances, RY = RΔ/3.

Practice these 45 questions interactively →