What is the frequency of the public electricity supply in Pakistan?
Show answer & solution
Answer: (B) 50 Hz
Pakistan's national grid operates at 50 Hz.
Electrical Engineering · Circuit Analysis
39 questions, each with the answer and a worked solution.
Practice interactively and track your score →What is the frequency of the public electricity supply in Pakistan?
Answer: (B) 50 Hz
Pakistan's national grid operates at 50 Hz.
What is the time period of a 50 Hz alternating supply?
Answer: (C) 20 ms
T = 1/f = 1/50 = 0.02 s.
What is the RMS value of a sinusoidal voltage with peak value Vm?
Answer: (A) Vm/√2
Vrms ≈ 0.707 Vm.
What is the average value of a sinusoidal current over one half cycle?
Answer: (D) 0.637 times the peak value
Iav = 2Im/π.
What is the average value of a sinusoidal waveform over one complete cycle?
Answer: (C) Zero
The positive and negative half cycles cancel.
What is the form factor of a sinusoidal wave?
Answer: (C) 1.11
Form factor = RMS/average = 0.707/0.637.
What is the crest (peak) factor of a sinusoidal wave?
Answer: (C) 1.414
Crest factor = peak/RMS = √2.
What is the peak value of a 220 V (RMS) sinusoidal supply?
Answer: (C) About 311 V
Vm = √2 × 220 ≈ 311 V.
What is the RMS value of an alternating current defined as?
Answer: (A) The steady DC current that produces the same heating effect in a resistor
RMS is the effective value of AC.
What is the angular frequency of a 50 Hz supply?
Answer: (C) About 314 rad/s
ω = 2πf = 2π × 50 ≈ 314 rad/s.
How is the current related to the voltage in a purely resistive AC circuit?
Answer: (B) They are in phase
A resistor has no reactance.
How is the current related to the applied voltage in a purely inductive AC circuit?
Answer: (A) Current lags voltage by 90°
Remember "ELI": voltage (E) leads current (I) in an inductor (L).
How is the current related to the applied voltage in a purely capacitive AC circuit?
Answer: (D) Current leads voltage by 90°
Remember "ICE": current (I) leads voltage (E) in a capacitor (C).
What is the inductive reactance of an inductor L at frequency f?
Answer: (B) 2πfL
Inductive reactance rises with frequency.
What is the capacitive reactance of a capacitor C at frequency f?
Answer: (D) 1/(2πfC)
Capacitive reactance falls as frequency rises.
What is the inductive reactance of a 0.1 H inductor at 50 Hz?
Answer: (C) 31.4 Ω
XL = 2π × 50 × 0.1 ≈ 31.4 Ω.
What is the magnitude of impedance of a circuit with R = 3 Ω and X = 4 Ω in series?
Answer: (B) 5 Ω
Z = √(3² + 4²) = 5 Ω.
What is admittance in an AC circuit?
Answer: (A) The reciprocal of impedance
Y = 1/Z = G + jB, measured in siemens.
How is the power factor of an AC circuit defined?
Answer: (D) The cosine of the phase angle between voltage and current
pf = cos φ = P/S = R/Z.
What is the power factor of a load with an impedance of (20 − j20) Ω?
Answer: (A) 0.707 leading
The angle is −45°, so pf = cos 45° = 0.707; negative reactance means leading.
In which unit is real (active) power measured?
Answer: (A) Watt
P = VI cos φ.
In which unit is reactive power measured?
Answer: (D) Volt-ampere reactive (VAR)
Q = VI sin φ.
In which unit is apparent power measured?
Answer: (B) Volt-ampere (VA)
S = VI.
How is complex power S defined in terms of the voltage phasor V and current phasor I?
Answer: (D) S = VI*, where I* is the complex conjugate of the current
S = P + jQ.
What is the total complex power supplied to a network equal to?
Answer: (B) The sum of the complex powers of the individual components
Complex power is conserved, as are real and reactive power.
How is the average power of a periodic waveform p(t) with period T calculated?
Answer: (A) P = (1/T)∫₀ᵀ p(t) dt
Average power is the mean of instantaneous power over one period.
What is the average power absorbed by a pure inductor in a sinusoidal circuit?
Answer: (B) Zero
Energy is stored and returned each cycle.
What are the real and reactive powers of a 10 kVA load at a lagging power factor of 0.8?
Answer: (C) 8 kW and 6 kVAR
P = 10 × 0.8 = 8 kW; Q = 10 × 0.6 = 6 kVAR.
How is the power factor of an inductive load usually improved?
Answer: (D) By connecting capacitors in parallel with the load
Capacitors supply leading reactive power locally.
What is a major disadvantage of a low power factor in a power system?
Answer: (A) Higher current for the same real power, causing more losses and larger equipment
Utilities may charge penalties for low power factor.
When are two circuit loops said to be magnetically coupled?
Answer: (A) When they affect each other through the magnetic field generated by one of them
Magnetic coupling is the basis of transformers.
What is the coefficient of coupling k between two coils with self-inductances L1, L2 and mutual inductance M?
Answer: (D) k = M/√(L1L2)
k ranges from 0 (no coupling) to 1 (perfect coupling).
What does the dot convention indicate in magnetically coupled circuits?
Answer: (B) The relative polarity of mutually induced voltages
It shows whether mutual voltages add or subtract.
What is the total inductance of two coupled coils connected in series aiding?
Answer: (C) L1 + L2 + 2M
In series opposing, the total is L1 + L2 − 2M.
How are the voltages and currents of an ideal transformer related to its turns ratio N2/N1?
Answer: (D) V2/V1 = N2/N1 and I2/I1 = N1/N2
An ideal transformer has no losses, so V1I1 = V2I2.
What is the phase difference between v = Vm sin(ωt + 30°) and i = Im sin(ωt − 30°)?
Answer: (C) Voltage leads current by 60°
The phase difference is 30° − (−30°) = 60°.
What is the peak-to-peak value of a sinusoid with peak value Vm?
Answer: (B) 2Vm
It is the difference between the maximum and minimum values.
What is the input impedance seen at the primary of an ideal transformer with turns ratio n = N2/N1 and load ZL?
Answer: (A) ZL/n²
Transformers are used for impedance matching.
What is a phasor?
Answer: (D) A complex number representing the amplitude and phase of a sinusoid
Phasors turn differential equations into algebraic equations.