Engineering, Management, Agriculture and Veterinary MCQs are now live. FPSC, PPSC, EPE, IELTS & GRE coming soon.

Strength of Materials: Shear Force, Bending Moment & Bending Theory

Civil Engineering · Strength of Materials

25 questions, each with the answer and a worked solution.

Practice interactively and track your score →
Question 1

At a section of a beam, the shear force is

  1. the algebraic sum of the moments of the forces on one side of the section
  2. the product of the load and its distance from the section
  3. the rate of change of slope along the beam at the section
  4. the algebraic sum of the vertical forces on one side of the section
Show answer & solution

Answer: (D) the algebraic sum of the vertical forces on one side of the section

Shear force = net transverse force on one side of the cut section.

Question 2

At a section of a beam, the bending moment is

  1. the shear force at the section multiplied by the distance to the nearest support
  2. the algebraic sum of the vertical forces on one side of the section multiplied by the span
  3. the algebraic sum of the moments about that section of all forces on one side of it
  4. the rate of change of the load intensity with distance at the section
Show answer & solution

Answer: (C) the algebraic sum of the moments about that section of all forces on one side of it

Bending moment = net moment about the section of all forces to one side of it.

Question 3

A point of contraflexure in a beam is a section where

  1. the shear force is maximum and changes sign
  2. the bending moment is zero and changes sign
  3. the slope of the elastic curve is zero
  4. the deflection of the beam is greatest
Show answer & solution

Answer: (B) the bending moment is zero and changes sign

At a point of contraflexure the curvature reverses, from sagging to hogging or the reverse, and M passes through zero.

Question 4

In a beam, the bending moment is maximum (or minimum) at a section where the shear force

  1. equals the total applied load
  2. is zero or changes sign
  3. has its greatest numerical value
  4. is constant and non-zero
Show answer & solution

Answer: (B) is zero or changes sign

Since dM/dx = V, M is stationary where V = 0 (or passes through zero).

Question 5

A simply supported beam of span L carries a central point load W. The maximum bending moment is

  1. WL/8
  2. WL/4
  3. WL/2
  4. WL
Show answer & solution

Answer: (B) WL/4

Each reaction is W/2, so M_max = (W/2)(L/2) = WL/4 at mid-span.

Question 6

A simply supported beam of span L carries a uniformly distributed load w per unit length over the whole span. The maximum bending moment is

  1. wL²/16
  2. wL²/12
  3. wL²/8
  4. wL²/4
Show answer & solution

Answer: (C) wL²/8

Each reaction is wL/2, so M_max = (wL/2)(L/2) − w(L/2)²/2 = wL²/8 at mid-span.

Question 7

A cantilever of length L carries a point load W at its free end. The maximum bending moment, at the fixed end, is

  1. WL/8
  2. WL/4
  3. WL/2
  4. WL
Show answer & solution

Answer: (D) WL

M = W × L, the load times its full lever arm from the fixed end.

Question 8

A cantilever of length L carries a uniformly distributed load w per unit length over its whole length. The maximum bending moment, at the fixed end, is

  1. wL²/12
  2. wL²/8
  3. wL²/4
  4. wL²/2
Show answer & solution

Answer: (D) wL²/2

The resultant wL acts at L/2 from the fixed end, so M = wL × L/2 = wL²/2.

Question 9

Take sagging bending moment as positive, shear force as positive when the left face tends to move up, and downward load intensity w. The relations between load, shear force V and bending moment M are

  1. dV/dx = w and dM/dx = V
  2. dV/dx = −w and dM/dx = V
  3. dV/dx = M and dM/dx = w
  4. dV/dx = −w and dM/dx = −V
Show answer & solution

Answer: (B) dV/dx = −w and dM/dx = V

Equilibrium of a small element gives dV/dx = −w and dM/dx = V, so d²M/dx² = −w.

Question 10

For a simply supported beam carrying a uniformly distributed load over the whole span, the shear force diagram is

  1. a straight inclined line that passes through zero at mid-span
  2. two horizontal steps of opposite sign meeting at mid-span
  3. a horizontal line of constant magnitude equal to half the total load
  4. a parabola with its maximum at mid-span
Show answer & solution

Answer: (A) a straight inclined line that passes through zero at mid-span

Since dV/dx = −w is constant, V varies linearly from +wL/2 at one support to −wL/2 at the other.

Question 11

For a simply supported beam carrying a uniformly distributed load over the whole span, the bending moment diagram is

  1. a triangle with its peak at mid-span
  2. a cubic curve with zero slope at each support
  3. a parabola with its maximum at mid-span
  4. a straight line varying from support to support
Show answer & solution

Answer: (C) a parabola with its maximum at mid-span

M is the integral of the linear shear diagram, giving a parabola with peak wL²/8 at mid-span.

Question 12

For a simply supported beam with a central point load, the shear force diagram consists of

  1. one inclined straight line that crosses zero under the central load
  2. a single rectangle of constant sign and magnitude W along the whole span
  3. a parabolic curve that crosses zero under the central load
  4. two horizontal segments of equal size and opposite sign, jumping under the load
Show answer & solution

Answer: (D) two horizontal segments of equal size and opposite sign, jumping under the load

V = +W/2 on one half and −W/2 on the other, with a jump of W at the load.

Question 13

For a simply supported beam with a central point load, the bending moment diagram is

  1. a parabola rising from zero at each support to a peak under the load
  2. two horizontal lines of opposite sign that jump under the load
  3. a triangle, rising linearly from zero at each support to a peak under the load
  4. a rectangle of constant height WL/4 along the whole span
Show answer & solution

Answer: (C) a triangle, rising linearly from zero at each support to a peak under the load

With constant shear in each half, M varies linearly from zero at the supports to WL/4 under the load.

Question 14

Between point loads, with no distributed load on that part, the bending moment diagram of a beam is

  1. constant, because the shear force there is zero
  2. a parabola, because the shear force varies linearly
  3. a straight line, because the shear force is constant
  4. a cubic curve, because the shear force varies parabolically
Show answer & solution

Answer: (C) a straight line, because the shear force is constant

Since dM/dx = V and V is constant between point loads, M is linear.

Question 15

A downward load acts on the overhanging part of a beam. Over that overhang, the bending moment is

  1. hogging, greatest at the free end and decreasing towards the support
  2. sagging, zero at the free end and increasing towards the support
  3. sagging, constant along the whole overhang
  4. hogging, zero at the free end and increasing towards the support
Show answer & solution

Answer: (D) hogging, zero at the free end and increasing towards the support

The overhang acts as a cantilever, so the moment is negative (hogging) and grows with distance from the free end.

Question 16

In the usual sign convention for beams, a sagging bending moment (concave upward) is taken as

  1. positive, and a hogging moment (concave downward) as negative
  2. negative, and a hogging moment (concave downward) as positive
  3. positive, and a hogging moment as also positive
  4. positive for either sense, since only the magnitude matters
Show answer & solution

Answer: (A) positive, and a hogging moment (concave downward) as negative

Sagging is positive and hogging negative; this also fixes the sign of a point of contraflexure.

Question 17

A simply supported beam carries several point loads. The maximum bending moment occurs

  1. under one of the loads, at the section where the shear force changes sign
  2. at mid-span, whatever the positions and magnitudes of the loads
  3. at a support, where the reactions have their greatest value
  4. midway between the two heaviest loads on the span
Show answer & solution

Answer: (A) under one of the loads, at the section where the shear force changes sign

With only point loads, M is piecewise linear, so its peak is under a load, where V crosses zero.

Question 18

A concentrated transverse load on a beam produces, in the shear force diagram,

  1. a jump equal to the load multiplied by its distance from the support
  2. a smooth parabolic rise across the load point
  3. no change, the diagram stays continuous there
  4. a sudden jump equal to the magnitude of the load
Show answer & solution

Answer: (D) a sudden jump equal to the magnitude of the load

The shear force changes abruptly by the amount of the concentrated load at its point of application.

Question 19

An external couple applied at a section of a beam produces, in the bending moment diagram,

  1. a sudden jump equal to the moment of the couple
  2. a jump in the shear force diagram equal to the couple
  3. a change of slope only, with the diagram continuous
  4. a parabolic rise across the point of application
Show answer & solution

Answer: (A) a sudden jump equal to the moment of the couple

A point moment adds a step discontinuity to the bending moment diagram; the shear force is unaffected.

Question 20

At the free end of a cantilever, or at the end support of a simply supported beam with no end couple, the bending moment is

  1. equal to the end shear force
  2. equal to the maximum moment in the span
  3. equal to the support reaction multiplied by the span
  4. zero
Show answer & solution

Answer: (D) zero

No load or couple acts beyond that section, so the moment of the forces on that side is zero.

Question 21

The simple (Euler-Bernoulli) theory of bending assumes that

  1. plane sections before bending remain plane after bending
  2. shear deformation is significant and warps the cross-section
  3. the material is non-homogeneous, with a modulus varying along the depth
  4. the modulus of elasticity differs between tension and compression
Show answer & solution

Answer: (A) plane sections before bending remain plane after bending

Plane sections remaining plane gives strain proportional to distance from the neutral axis.

Question 22

In the bending equation M/I = σ/y = E/R, the symbol y denotes

  1. the deflection at mid-span of the beam
  2. the distance of the fibre from the neutral axis
  3. the total depth of the beam section
  4. the distance of the fibre from the top face of the beam
Show answer & solution

Answer: (B) the distance of the fibre from the neutral axis

σ = My/I, so stress at a fibre depends on its distance y from the neutral axis.

Question 23

In the bending equation M/I = σ/y = E/R, the symbol R denotes

  1. the radius of curvature of the bent beam axis
  2. the radius of gyration of the cross-section
  3. the reaction at the support
  4. the radius of the circular cross-section of the beam
Show answer & solution

Answer: (A) the radius of curvature of the bent beam axis

Curvature 1/R = M/EI describes how sharply the beam is bent.

Question 24

In pure bending of a symmetrical, homogeneous elastic beam, the neutral axis passes through

  1. a point one-third of the depth from the bottom fibre
  2. the extreme compression fibre of the section
  3. the centroid of the cross-section
  4. the shear centre, whatever the section shape
Show answer & solution

Answer: (C) the centroid of the cross-section

With zero net axial force, ∫σ dA = 0, so the neutral axis coincides with the centroidal axis.

Question 25

In pure bending, the bending stress across the depth of the section varies

  1. parabolically, with its maximum at the neutral axis
  2. linearly, zero at the neutral axis and maximum at the extreme fibres
  3. linearly, with its maximum at the neutral axis and zero at the extreme fibres
  4. uniformly, with the same value at every fibre
Show answer & solution

Answer: (B) linearly, zero at the neutral axis and maximum at the extreme fibres

σ = My/I is directly proportional to the distance y from the neutral axis.

Practice these 25 questions interactively →