Engineering, Management, Agriculture and Veterinary MCQs are now live. FPSC, PPSC, EPE, IELTS & GRE coming soon.

Strength of Materials: Section Properties, Beam Shear Stress & Deflection

Civil Engineering · Strength of Materials

27 questions, each with the answer and a worked solution.

Practice interactively and track your score →
Question 1

The section modulus Z of a beam cross-section is

  1. I/y_max, the second moment of area divided by the distance to the extreme fibre
  2. A × y_max, the area multiplied by the distance to the extreme fibre
  3. I × y_max, the second moment of area multiplied by the distance to the extreme fibre
  4. I/A, the second moment of area divided by the cross-sectional area
Show answer & solution

Answer: (A) I/y_max, the second moment of area divided by the distance to the extreme fibre

Z = I/y_max is a purely geometric measure of bending resistance, so σ_max = M/Z.

Question 2

The section modulus of a rectangular section of width b and depth d is

  1. bd³/12
  2. bd²/12
  3. bd²/6
  4. bd²/4
Show answer & solution

Answer: (C) bd²/6

Z = I/y_max = (bd³/12)/(d/2) = bd²/6.

Question 3

The maximum bending stress in a beam is

  1. M/I, the bending moment divided by the second moment of area
  2. M/Z, the bending moment divided by the section modulus
  3. Z/M, the section modulus divided by the bending moment
  4. M × Z, the bending moment multiplied by the section modulus
Show answer & solution

Answer: (B) M/Z, the bending moment divided by the section modulus

σ_max = M y_max / I = M/Z.

Question 4

For the same bending moment, a section with a larger section modulus has

  1. a lower maximum bending stress
  2. a higher maximum bending stress
  3. a lower bending moment capacity
  4. the same maximum bending stress, because only M matters
Show answer & solution

Answer: (A) a lower maximum bending stress

σ_max = M/Z, so increasing Z reduces the stress.

Question 5

An I-section is more efficient in bending than a rectangular section of the same area because it

  1. has its material concentrated near the neutral axis where the bending stress is highest
  2. makes the bending stress uniform across the whole depth of the section
  3. has the same I as the rectangle but resists shear better in the flanges
  4. gives a larger I and Z by placing the material far from the neutral axis
Show answer & solution

Answer: (D) gives a larger I and Z by placing the material far from the neutral axis

Material in the flanges is at large y, so I = ∑Ay² is much larger for the same area.

Question 6

A beam of uniform strength is one whose

  1. bending moment is the same at every section, so a prismatic section is adequate
  2. deflection is zero at every section throughout the span of the beam
  3. shear force is the same at every section, which needs a constant depth along the span
  4. section varies along the length so that bending stress is the permissible value at every section
Show answer & solution

Answer: (D) section varies along the length so that bending stress is the permissible value at every section

Making Z proportional to M(x) keeps σ = M/Z constant, which saves material.

Question 7

The flexural rigidity of a beam is

  1. EA, the product of the modulus of elasticity and the cross-sectional area
  2. EZ, the product of the modulus of elasticity and the section modulus
  3. GJ, the product of the modulus of rigidity and the polar second moment of area
  4. EI, the product of the modulus of elasticity and the second moment of area
Show answer & solution

Answer: (D) EI, the product of the modulus of elasticity and the second moment of area

EI measures a beam's resistance to bending deformation, since curvature = M/EI.

Question 8

In a beam of rectangular or circular section, the transverse shear stress due to bending is greatest at the

  1. extreme top and bottom fibres
  2. points midway between the neutral axis and the bottom fibre
  3. neutral axis
  4. points one-quarter of the depth from the top
Show answer & solution

Answer: (C) neutral axis

τ = VAȳ/(Ib) is largest where the first moment of area Aȳ is largest, at the neutral axis.

Question 9

At which fibres of a rectangular beam section is the transverse shear stress zero?

  1. the extreme top and bottom fibres
  2. the fibres at three-quarters of the depth from the top
  3. the fibres at one-quarter depth
  4. the neutral axis of the section
Show answer & solution

Answer: (A) the extreme top and bottom fibres

At the free top and bottom faces the first moment of the area beyond the fibre is zero, so τ = 0.

Question 10

For a rectangular beam section, the distribution of transverse shear stress over the depth is

  1. parabolic, zero at the top and bottom fibres and maximum at the neutral axis
  2. linear, zero at the neutral axis and maximum at the extreme top and bottom fibres
  3. parabolic, maximum at the extreme fibres and zero at the neutral axis
  4. uniform over the depth and equal to V/A
Show answer & solution

Answer: (A) parabolic, zero at the top and bottom fibres and maximum at the neutral axis

τ = (V/2I)(d²/4 − y²), a parabola with its peak at y = 0.

Question 11

The average shear stress on a beam section is found by dividing the shear force by the

  1. cross-sectional area
  2. second moment of area
  3. section modulus
  4. radius of gyration
Show answer & solution

Answer: (A) cross-sectional area

τ_avg = V/A.

Question 12

For a rectangular beam section, the ratio of the maximum shear stress to the average shear stress is

  1. 1.00
  2. 1.25
  3. 1.50
  4. 2.00
Show answer & solution

Answer: (C) 1.50

τ_max = 3V/(2bd) = 1.5 V/A at the neutral axis.

Question 13

For a solid circular beam section, the ratio of the maximum shear stress to the average shear stress is

  1. 1.00
  2. 1.33
  3. 1.50
  4. 2.00
Show answer & solution

Answer: (B) 1.33

τ_max = 4V/(3A), i.e. 4/3 (about 1.33) times the average value.

Question 14

For small deflections (sagging moment positive, y measured upward), the differential equation of the elastic curve of a beam is

  1. EI dy/dx = M
  2. EI d²y/dx² = M
  3. EI d²y/dx² = V
  4. EI d³y/dx³ = M
Show answer & solution

Answer: (B) EI d²y/dx² = M

Curvature d²y/dx² ≈ M/EI is the basis of all deflection methods.

Question 15

The double integration method for beam deflection consists of

  1. differentiating the deflection expression twice to obtain the bending moment
  2. integrating the load intensity once and applying the area of the bending moment diagram
  3. integrating EI d²y/dx² = M twice and using boundary conditions to find the constants
  4. equating the work done by the loads to the strain energy stored in the beam
Show answer & solution

Answer: (C) integrating EI d²y/dx² = M twice and using boundary conditions to find the constants

The first integration gives the slope and the second gives the deflection; support conditions fix the two constants.

Question 16

Macaulay's method is particularly useful for beams with

  1. several discontinuous loads, using a single bending moment expression
  2. eccentric axial loads causing buckling
  3. a uniformly distributed load applied over the whole span of a simply supported beam
  4. a single point load applied at the centre of a simply supported span
Show answer & solution

Answer: (A) several discontinuous loads, using a single bending moment expression

Macaulay's brackets let one continuous moment expression cover all load discontinuities, so only two constants appear.

Question 17

The moment-area method of finding beam deflection uses

  1. the area under the load diagram alone
  2. the area of the shear force diagram between two points
  3. areas and moments of the M/EI diagram between two points
  4. the area of the cross-section multiplied by the span
Show answer & solution

Answer: (C) areas and moments of the M/EI diagram between two points

Mohr's theorems relate changes of slope and tangential deviations to areas and moments of the M/EI diagram.

Question 18

A simply supported beam carries a central point load. The maximum deflection occurs at

  1. the section where the shear force is greatest
  2. mid-span, where the slope is zero
  3. the supports, where the slope is largest
  4. the quarter-span points
Show answer & solution

Answer: (B) mid-span, where the slope is zero

By symmetry the slope is zero at mid-span, which is therefore where deflection is greatest.

Question 19

A simply supported beam of span L carries a central point load W. The maximum deflection is

  1. WL³/(3EI)
  2. WL³/(48EI)
  3. 5WL³/(384EI)
  4. WL³/(8EI)
Show answer & solution

Answer: (B) WL³/(48EI)

Double integration with y = 0 at the supports and zero slope at mid-span gives δ_max = WL³/(48EI).

Question 20

A cantilever of length L carries a point load W at its free end. The maximum deflection is

  1. WL³/(48EI)
  2. WL²/(2EI)
  3. WL³/(3EI)
  4. WL³/(8EI)
Show answer & solution

Answer: (C) WL³/(3EI)

Double integration from the fixed end gives δ = WL³/(3EI) at the free end (WL²/2EI is the slope).

Question 21

A simply supported beam of span L carries a uniformly distributed load w per unit length over the whole span. The maximum deflection is

  1. wL⁴/(8EI)
  2. 5wL⁴/(384EI)
  3. 5wL³/(384EI)
  4. wL⁴/(48EI)
Show answer & solution

Answer: (B) 5wL⁴/(384EI)

Integrating EI y'' = wLx/2 − wx²/2 with y(0) = y(L) = 0 gives 5wL⁴/(384EI) at mid-span.

Question 22

A cantilever of length L carries a uniformly distributed load w per unit length over its whole length. The maximum deflection is

  1. wL⁴/(3EI)
  2. 5wL⁴/(384EI)
  3. wL⁴/(48EI)
  4. wL⁴/(8EI)
Show answer & solution

Answer: (D) wL⁴/(8EI)

Integrating from the fixed end gives δ_free = wL⁴/(8EI).

Question 23

The slope of a beam at a section is

  1. the rate of change of deflection with distance, dy/dx
  2. the rate of change of bending moment with distance, dM/dx
  3. the rate of change of shear force with distance, dV/dx
  4. the second derivative of deflection, d²y/dx²
Show answer & solution

Answer: (A) the rate of change of deflection with distance, dy/dx

Slope θ = dy/dx is the inclination of the deflected axis; d²y/dx² is the curvature.

Question 24

For a simply supported beam under symmetrical loading, the slope is

  1. zero at the supports and greatest at the quarter points
  2. the same at every section along the span
  3. greatest at mid-span and zero at the supports
  4. zero at mid-span and greatest at the supports
Show answer & solution

Answer: (D) zero at mid-span and greatest at the supports

Deflection is maximum (slope zero) at mid-span and the deflected curve is steepest at the ends.

Question 25

For a cantilever with a point load at the free end, the slope is

  1. zero at the free end and equal along the rest of the length
  2. greatest at mid-length and zero at each end
  3. greatest at the fixed end and zero at the free end
  4. zero at the fixed end and greatest at the free end
Show answer & solution

Answer: (D) zero at the fixed end and greatest at the free end

θ(x) accumulates from zero at the fixed support to WL²/(2EI) at the free end.

Question 26

The unit load method for finding beam deflections is based on

  1. conservation of linear momentum of the beam
  2. equilibrium of moments at the supports only
  3. superposition of temperature strains in the beam
  4. the principle of virtual work
Show answer & solution

Answer: (D) the principle of virtual work

A virtual unit load at the point of interest gives δ = ∫ M m dx/(EI), using virtual work.

Question 27

Castigliano's second theorem states that the partial derivative of the total strain energy with respect to a load gives

  1. the slope of the beam at the nearest support, measured in the plane of loading
  2. the deflection at the point of application of that load, in the load's direction
  3. the stress at the point of application of that load, in the direction of the load
  4. the reaction at the nearest support caused by that load, in the direction of the load
Show answer & solution

Answer: (B) the deflection at the point of application of that load, in the load's direction

δ = ∂U/∂P, evaluated at the point where P acts and along its line of action.

Practice these 27 questions interactively →