What is the condition for stability of a linear closed-loop system?
Show answer & solution
Answer: (B) All roots of the characteristic equation must have negative real parts
Roots in the left half of the s-plane give decaying responses.
Chemical Engineering · Process Control & Instrumentation
34 questions, each with the answer and a worked solution.
Practice interactively and track your score →What is the condition for stability of a linear closed-loop system?
Answer: (B) All roots of the characteristic equation must have negative real parts
Roots in the left half of the s-plane give decaying responses.
What does a pair of purely imaginary roots of the characteristic equation indicate?
Answer: (C) Sustained oscillations at constant amplitude (marginal stability)
This occurs at the ultimate gain.
Which test checks stability from the coefficients of the characteristic polynomial without finding roots?
Answer: (D) Routh–Hurwitz criterion
A sign change in the first column indicates unstable roots.
What does the number of sign changes in the first column of the Routh array show?
Answer: (A) The number of roots in the right half of the s-plane
No sign changes means stable.
What is the root locus?
Answer: (B) A plot of closed-loop roots as controller gain varies from zero to infinity
Crossing into the right half-plane marks instability.
What does a Bode diagram show?
Answer: (B) Amplitude ratio and phase angle against frequency on logarithmic scales
It is used for frequency response analysis.
What is the high-frequency asymptote slope of the amplitude ratio of a first-order system on a Bode plot?
Answer: (D) −1 (−20 dB per decade)
A second-order system has slope −2.
What is the phase lag of a first-order system at the corner frequency ω = 1/τ?
Answer: (B) 45°
Phase approaches −90° at high frequency.
What is the maximum phase lag of a first-order system?
Answer: (C) 90°
Dead time adds unlimited phase lag.
What is the phase lag introduced by a dead time θ at frequency ω?
Answer: (A) ωθ radians
Its amplitude ratio is 1 at all frequencies.
What is the amplitude ratio of a pure dead time element?
Answer: (D) 1 at all frequencies
Dead time only shifts phase.
What does the Bode stability criterion state?
Answer: (C) A closed loop is unstable if the open-loop amplitude ratio exceeds 1 at the frequency where phase lag is 180°
It applies to open-loop stable systems with simple crossover.
What is the crossover frequency?
Answer: (A) The frequency at which the open-loop phase angle is −180°
The ultimate period is 2π/ωco.
What is gain margin?
Answer: (D) The reciprocal of the open-loop amplitude ratio at the phase crossover frequency
A gain margin of 1.7–2 is a common design target.
What is phase margin?
Answer: (B) 180° plus the phase angle at the frequency where open-loop amplitude ratio is 1
A phase margin of 30–45° is commonly used.
What is a Nyquist plot?
Answer: (A) A polar plot of the open-loop frequency response in the complex plane
Encirclement of −1 indicates instability.
Why does dead time make feedback control more difficult?
Answer: (C) It adds phase lag that lowers the ultimate gain and limits achievable performance
Smith predictors compensate for dead time.
Can a first-order system without dead time become unstable under proportional control?
Answer: (D) No, its closed loop remains stable for any positive gain
Its phase lag never reaches 180°.
What is the maximum phase lag of a second-order system without dead time?
Answer: (C) 180°
With P-only control it cannot become unstable, but can oscillate.
Which process type can become unstable under high proportional gain?
Answer: (B) A third-order or higher process, or one with dead time
Phase lag must reach 180°.
What is the ultimate gain Ku?
Answer: (A) The controller gain at which the closed loop oscillates with constant amplitude
It is the starting point for Ziegler–Nichols tuning.
What is the ultimate period Pu?
Answer: (C) The period of sustained oscillation at the ultimate gain
Pu = 2π/ωco.
What is the closed-loop pole location for a stable but oscillatory response?
Answer: (B) Complex conjugate roots with negative real parts
The imaginary part sets the oscillation frequency.
What is the corner frequency of a first-order lag with time constant 5 s?
Answer: (A) 0.2 rad/s
ωc = 1/τ.
What is the amplitude ratio of a first-order system with unit gain at the corner frequency?
Answer: (C) About 0.707
AR = 1/√(1 + ω²τ²).
What is the ultimate gain of a loop whose open-loop amplitude ratio at the phase crossover frequency is 0.25 per unit of controller gain?
Answer: (D) 4
Ku = 1/AR at crossover.
What is the gain margin if the open-loop amplitude ratio at the crossover frequency is 0.5?
Answer: (D) 2
GM = 1/0.5.
What happens to the stability of a feedback loop when dead time increases?
Answer: (C) It becomes less stable, with a lower ultimate gain
Phase lag increases with dead time.
What is the effect of integral action on stability of a feedback loop?
Answer: (A) It adds phase lag and tends to make the loop less stable
Derivative action adds phase lead.
What is the effect of derivative action on the phase of a feedback loop?
Answer: (B) It adds phase lead, allowing higher gain
Too much derivative amplifies noise.
What does a Routh array first-column entry of zero indicate?
Answer: (B) Roots on the imaginary axis or a special case requiring further analysis
It often marks the ultimate gain.
For the characteristic equation s³ + 6s² + 11s + 6 + K = 0, what is the ultimate value of K?
Answer: (C) 60
Routh condition: 6 × 11 > 6 + K gives K < 60.
What is the phase angle of a pure integrator 1/s?
Answer: (D) −90° at all frequencies
Its amplitude ratio falls with frequency.
What is the effect of measurement lag on loop stability?
Answer: (B) It adds phase lag and lowers the ultimate gain
Fast sensors improve control.