What is the main purpose of the Laplace transform in process control?
Show answer & solution
Answer: (D) To convert linear differential equations into algebraic equations in s
Transfer functions are written in the s-domain.
Chemical Engineering · Process Control & Instrumentation
34 questions, each with the answer and a worked solution.
Practice interactively and track your score →What is the main purpose of the Laplace transform in process control?
Answer: (D) To convert linear differential equations into algebraic equations in s
Transfer functions are written in the s-domain.
What is a transfer function?
Answer: (B) The ratio of the Laplace transform of the output to that of the input, with zero initial conditions
Deviation variables make initial conditions zero.
What are deviation variables?
Answer: (C) Variables measured as differences from their steady-state values
They give zero initial conditions in transfer functions.
What is the Laplace transform of a unit step function?
Answer: (A) 1/s
A unit impulse transforms to 1.
What is the Laplace transform of e^(−at)?
Answer: (C) 1/(s + a)
It appears in first-order responses.
What is the transfer function of a first-order system?
Answer: (B) K/(τs + 1)
K is the steady-state gain and τ the time constant.
What percentage of its final change does a first-order system reach after one time constant following a step input?
Answer: (B) 63.2%
After 2τ it reaches 86.5%, after 3τ 95% and after 4τ 98.2%.
After how many time constants does a first-order system reach about 98% of its final value?
Answer: (C) 4
After 5τ it reaches 99.3%.
What is the time constant of a liquid-level tank with area A and linear outlet resistance R?
Answer: (A) AR
τ = AR and gain = R.
What is the time constant of a mercury thermometer?
Answer: (D) mCp/(hA)
Small, thin bulbs respond faster.
What is the final value theorem?
Answer: (A) The limit of y(t) as t → ∞ equals the limit of sY(s) as s → 0
It applies only if the final value exists.
What is the steady-state output of a first-order system with gain 2 for a step input of magnitude 3?
Answer: (D) 6
Output = K × M.
What is the transfer function of a pure dead time (transport lag) of θ?
Answer: (A) e^(−θs)
Dead time delays the response without changing its shape.
What is the standard transfer function of a second-order system?
Answer: (C) K/(τ²s² + 2ζτs + 1)
ζ is the damping factor.
How does a second-order system respond to a step when ζ < 1?
Answer: (B) With damped oscillations (underdamped)
ζ = 1 is critically damped and ζ > 1 overdamped.
What is the damping factor of a critically damped system?
Answer: (C) 1
It gives the fastest response without overshoot.
How is overshoot related to damping factor for an underdamped second-order system?
Answer: (D) Overshoot = exp(−πζ/√(1 − ζ²))
Decay ratio equals overshoot squared.
What is the decay ratio of an underdamped response?
Answer: (D) The ratio of successive peak heights above the final value
Decay ratio = (overshoot)².
What is the quarter decay ratio criterion?
Answer: (A) A tuning criterion in which each oscillation peak is one-quarter of the previous one
Ziegler–Nichols tuning aims at about quarter decay.
What are interacting tanks?
Answer: (B) Tanks in series where the level of the downstream tank affects flow out of the upstream tank
Interacting systems are more sluggish.
What is the overall transfer function of two non-interacting first-order tanks in series?
Answer: (D) The product of their individual transfer functions
Gains multiply and time constants appear as two first-order factors.
What is an integrating (pure capacitive) process?
Answer: (A) A process whose output changes continuously for a step input, with transfer function K/s
A tank with a pump-driven outlet behaves this way.
What is a self-regulating process?
Answer: (C) A process that settles at a new steady state after a disturbance without control
A tank with gravity outflow is self-regulating.
What is an inverse response?
Answer: (B) An output that initially moves in the opposite direction to its final change
Boiler drum level (shrink and swell) is an example.
What causes inverse response in a process transfer function?
Answer: (A) A right-half-plane zero
It makes control more difficult.
What is linearisation of a non-linear model?
Answer: (B) Approximating it by a Taylor series truncated after first-order terms around a steady state
The linear model is valid near the operating point.
What is the response of a first-order system to an impulse input?
Answer: (C) An instant jump followed by exponential decay
y(t) = (K/τ)e^(−t/τ) for a unit impulse.
What is the steady-state lag of a first-order system to a ramp input?
Answer: (D) The output lags the input by one time constant
The output becomes parallel to the input.
What is the gain of a process if a 10% change in input causes a 25 °C steady change in output?
Answer: (B) 2.5 °C per %
K = Δoutput/Δinput.
What is rise time for an underdamped system?
Answer: (C) The time for the response to first reach the final value
Settling time is the time to remain within ±5% (or ±2%) of final value.
What is the time constant of a stirred tank with volume 2 m³ and throughput 0.5 m³/min for concentration changes?
Answer: (D) 4 min
τ = V/q.
What is a lag in process dynamics?
Answer: (A) A delay in response due to capacitance and resistance, giving gradual change
Dead time is a different effect.
What is the response of a first-order system with τ = 2 min after 2 min, as a fraction of final change for a step input?
Answer: (B) About 0.632
t = τ.
What is a first-order-plus-dead-time (FOPDT) model?
Answer: (C) Ke^(−θs)/(τs + 1), widely used to approximate process responses
It is the basis for many tuning rules.