Which reserve estimation method assigns each drill hole's grade to a polygon around it?
Show answer & solution
Answer: (D) Polygonal (area of influence) method
Each polygon contains all points closer to its hole than to any other.
Mining Engineering · Mine Economics & Mineral Processing
30 questions, each with the answer and a worked solution.
Practice interactively and track your score →Which reserve estimation method assigns each drill hole's grade to a polygon around it?
Answer: (D) Polygonal (area of influence) method
Each polygon contains all points closer to its hole than to any other.
Which reserve estimation method joins drill holes into triangles and uses the average of the three corner values?
Answer: (B) Triangular method
Each triangle is treated as a prism of uniform grade.
Which classical method estimates reserves from areas of ore on parallel vertical sections?
Answer: (C) Cross-sectional method
Volumes between sections are found using end-area or prismoidal formulas.
Which method weights sample grades by the inverse of their distance (or a power of it) from the block being estimated?
Answer: (A) Inverse distance weighting
Nearer samples get greater weight.
Which South African mining engineer's work led to the geostatistical estimation method named after him?
Answer: (C) Danie Krige
Matheron later formalised the theory of geostatistics.
What is the main advantage of kriging over simpler estimation methods?
Answer: (B) It gives estimates with minimum variance and also measures estimation error
Kriging uses the variogram to assign optimal weights.
What does the nugget effect of a variogram represent?
Answer: (A) Short-scale variability and sampling error at zero distance
High nugget effects are common in coarse gold deposits.
What is the range of a variogram?
Answer: (D) The distance beyond which samples are no longer correlated
Samples within the range help estimate a block.
What is the sill of a variogram?
Answer: (B) The level at which the variogram flattens, equal to the total variance
The sill is reached at the range distance.
What does a grade–tonnage curve show?
Answer: (A) How tonnage and average grade of ore change with the cut-off grade
Raising cut-off reduces tonnage but raises average grade.
How does increasing the cut-off grade usually affect ore tonnage and average grade?
Answer: (C) Tonnage falls and average grade rises
Less material qualifies as ore, but what remains is richer.
What are modifying factors in reserve estimation?
Answer: (D) Mining, processing, economic, legal, environmental and social factors used to convert resources to reserves
Reserves can be declared only after modifying factors are applied.
Why are mining recovery and dilution factors applied in reserve estimation?
Answer: (B) To account for ore lost and waste mixed in during mining
Reserves must reflect what will actually be delivered to the plant.
What is compositing of drill hole samples?
Answer: (D) Combining samples into equal lengths before grade estimation
Equal-length composites give equal support for estimation.
What is top cutting (grade capping)?
Answer: (C) Reducing extremely high assay values to a chosen maximum to avoid overestimating grade
Outliers can greatly bias estimated grades.
What is the life of a mine with 20 million tonnes of reserves mined at 2 million tonnes per year?
Answer: (B) 10 years
Life = reserves/annual production = 20/2 = 10 years.
According to Taylor's rule, how is the optimum mine life in years related to ore reserve tonnage T?
Answer: (A) Life ≈ 0.2 × T^0.25
Taylor's rule gives an approximate starting point for production rate.
What is the coal tonnage in a seam 2 m thick covering 1 km² with a density of 1.4 t/m³?
Answer: (B) 2.8 million tonnes
1,000,000 m² × 2 m × 1.4 = 2.8 Mt.
How is the specific gravity of a core sample commonly measured?
Answer: (D) By weighing it in air and in water (water displacement)
SG = weight in air/(weight in air − weight in water).
Who takes professional responsibility for public reports of mineral resources and reserves under JORC-style codes?
Answer: (A) A Competent Person
The Competent Person must have relevant experience and professional membership.
What are geological losses in coal reserve estimation?
Answer: (C) Reductions for faults, washouts and other geological disturbances
They are deducted to obtain realistic mineable reserves.
What is the extraction (recovery) factor in underground coal reserve estimation?
Answer: (C) The proportion of in-place coal that the mining method will actually recover
For room and pillar it may be 50–70%; for longwall higher.
What is a block model's block grade usually estimated from?
Answer: (A) Nearby composite samples using a chosen interpolation method
Kriging or inverse distance is commonly used.
Why must density be estimated as carefully as grade?
Answer: (D) Tonnage depends directly on density
An error in density gives an equal error in tonnes and metal.
What is a mineral inventory?
Answer: (C) The total estimated tonnage and grade of mineralised material before economic constraints
Resources and reserves are derived from the mineral inventory.
Which statistical measure shows how variable sample grades are around the mean?
Answer: (A) Standard deviation or coefficient of variation
Highly variable deposits need closer drilling.
What is the effect of increasing dilution on the mined grade?
Answer: (B) It lowers the mined grade and increases tonnage
Waste mixed with ore lowers grade.
How is the contained metal in a reserve calculated?
Answer: (D) Ore tonnage multiplied by grade
Recovered metal also depends on plant recovery.
What is the recovered copper from 1 million tonnes of ore grading 1% Cu with a plant recovery of 90%?
Answer: (B) 9,000 t
1,000,000 × 0.01 × 0.9 = 9,000 t.
Which sampling problem makes grade estimation of coarse gold deposits difficult?
Answer: (C) The nugget effect caused by erratic distribution of gold particles
Large samples and many duplicates are needed.