On what principle does froth flotation work?
Show answer & solution
Answer: (B) Hydrophobic mineral particles attach to air bubbles and rise into a froth
Hydrophilic gangue stays in the pulp.
Mining Engineering · Mine Economics & Mineral Processing
33 questions, each with the answer and a worked solution.
Practice interactively and track your score →On what principle does froth flotation work?
Answer: (B) Hydrophobic mineral particles attach to air bubbles and rise into a froth
Hydrophilic gangue stays in the pulp.
Which reagents make mineral surfaces water-repellent in flotation?
Answer: (C) Collectors
Xanthates are common collectors for sulphide minerals.
Which reagents are used as collectors for sulphide minerals?
Answer: (D) Xanthates
Xanthates adsorb on sulphide mineral surfaces.
What is the main function of a frother in flotation?
Answer: (D) To produce a stable froth of fine bubbles
Pine oil and MIBC are common frothers.
What does a depressant do in flotation?
Answer: (A) It prevents certain minerals from floating
Cyanide depresses pyrite and sphalerite in some circuits.
Which reagent activates sphalerite so that it can be floated?
Answer: (C) Copper sulphate
Copper ions coat the sphalerite surface to make it respond to xanthate.
Which reagent is most commonly used to raise pH in sulphide flotation?
Answer: (B) Lime
Lime also depresses pyrite.
What is the role of rougher, scavenger and cleaner cells in flotation?
Answer: (C) Roughers recover most values, scavengers recover remaining values and cleaners upgrade the concentrate
Flowsheets combine these stages to balance grade and recovery.
Which gravity separation device uses pulsating water to stratify particles by density?
Answer: (B) Jig
Jigs are used for coal, iron ore and gold.
Which gravity device separates particles on an inclined, vibrating deck with riffles?
Answer: (A) Shaking table
Tables are used for gold, tin and tungsten.
What is a spiral concentrator?
Answer: (D) A helical channel in which slurry flows down and heavy particles move to the inner edge
Spirals are widely used for mineral sands and iron ore.
What is dense (heavy) medium separation?
Answer: (D) Separation in a liquid suspension of intermediate density so that light particles float and heavy particles sink
It is widely used in coal washing and diamond recovery.
Which materials are commonly used to make the dense medium in heavy medium separation?
Answer: (B) Fine magnetite or ferrosilicon suspended in water
The medium is recovered magnetically and reused.
Which separation method is used to concentrate magnetite ore?
Answer: (C) Magnetic separation
Low-intensity magnetic separators recover strongly magnetic minerals.
Which separation method is used to separate conductive minerals such as rutile from non-conductive zircon in mineral sands?
Answer: (A) Electrostatic separation
Particles are charged and deflected differently.
Which chemical is most widely used to dissolve gold from ores?
Answer: (D) Sodium cyanide
Cyanide forms a soluble gold complex in alkaline solution.
What is carbon-in-pulp (CIP) in gold processing?
Answer: (A) Recovery of dissolved gold by adsorption onto activated carbon in the leached slurry
Carbon-in-leach (CIL) adds carbon during leaching.
What is the Merrill–Crowe process?
Answer: (B) Precipitation of gold from cyanide solution using zinc dust
It is an alternative to carbon adsorption.
Why is mercury amalgamation in artisanal gold mining discouraged?
Answer: (C) Mercury is highly toxic to people and the environment
The Minamata Convention aims to reduce mercury use.
What is solvent extraction and electrowinning (SX-EW)?
Answer: (C) A process that recovers copper from leach solutions and plates it as pure cathode
SX-EW is used after heap leaching of oxide copper ores.
What is the main product of the Saindak copper smelter?
Answer: (D) Blister copper containing gold and silver
Blister copper is refined further overseas.
What is the formula for metallurgical recovery R using feed grade f, concentrate grade c and tailings grade t?
Answer: (B) R = c(f − t)/[f(c − t)] × 100
This two-product formula uses assays only.
What is the recovery if feed grade is 1% Cu, concentrate grade is 25% Cu and tailings grade is 0.1% Cu?
Answer: (C) About 90%
R = 25(1 − 0.1)/[1(25 − 0.1)] × 100 ≈ 90.4%.
What is the ratio of concentration for feed grade 1%, concentrate grade 25% and tailings grade 0.1%?
Answer: (C) About 27.7
Ratio = (c − t)/(f − t) = 24.9/0.9 ≈ 27.7 tonnes of feed per tonne of concentrate.
What is the usual relationship between concentrate grade and recovery?
Answer: (A) Higher grade usually means lower recovery, and the reverse
Plant operators choose the most economic balance.
Which equipment is used to remove water from concentrate and tailings slurries by settling?
Answer: (B) Thickener
Thickened slurry is then filtered or pumped to tailings.
What is the purpose of coal washing?
Answer: (D) To reduce ash and impurities and improve coal quality
Washing raises calorific value and lowers transport cost per unit energy.
What does a float–sink (washability) test on coal determine?
Answer: (A) How coal separates at different densities, to predict washing results
Washability curves guide plant design.
What is ore sorting?
Answer: (B) Separating ore and waste particles using sensors such as X-ray or colour before grinding
Sorting can reject waste early and reduce processing cost.
Which gravity concentrator uses centrifugal force to recover fine free gold?
Answer: (A) Centrifugal concentrator (such as Knelson)
These are widely used in gravity gold circuits.
What is a tailings stream?
Answer: (D) The waste material left after valuable minerals are removed
Tailings are stored in tailings facilities.
What is heap leaching?
Answer: (D) Stacking crushed ore on lined pads and irrigating it with leach solution
It is low-cost and used for low-grade gold and copper ores.
What is smelting?
Answer: (C) Extracting metal from concentrate by melting at high temperature
Copper smelting produces matte and then blister copper.