Engineering, Management, Agriculture and Veterinary MCQs are now live. FPSC, PPSC, EPE, IELTS & GRE coming soon.

Manufacturing Processes: Advanced Machining and CNC

Mechanical Engineering · Manufacturing Processes

30 questions, each with the answer and a worked solution.

Practice interactively and track your score →
Question 1

What is electric discharge machining (EDM)?

  1. Removing metal by abrasive slurry
  2. Cutting with a laser
  3. Removing metal by reverse electroplating
  4. Removing metal by controlled electric sparks between a tool electrode and the work in a dielectric fluid
Show answer & solution

Answer: (D) Removing metal by controlled electric sparks between a tool electrode and the work in a dielectric fluid

It is used for hard materials and complex die cavities.

Question 2

Which condition must a workpiece meet for EDM?

  1. It must be non-metallic
  2. It must be transparent
  3. It must be electrically conductive
  4. It must be soft
Show answer & solution

Answer: (C) It must be electrically conductive

Hardness of the work does not matter.

Question 3

Which fluid is commonly used as the dielectric in EDM?

  1. Kerosene or deionised water
  2. Petrol
  3. Cutting oil emulsion
  4. Brine solution
Show answer & solution

Answer: (A) Kerosene or deionised water

The dielectric also flushes away debris.

Question 4

What is electrochemical machining (ECM)?

  1. Removing metal with abrasives
  2. Removing metal by anodic dissolution in an electrolyte, the reverse of electroplating
  3. Removing metal with sparks
  4. Removing metal with heat only
Show answer & solution

Answer: (B) Removing metal by anodic dissolution in an electrolyte, the reverse of electroplating

There is no tool wear in ECM.

Question 5

For which materials is ultrasonic machining (USM) best suited?

  1. Wood
  2. Soft ductile metals
  3. Hard and brittle materials such as glass, ceramics and gems
  4. Plastics only
Show answer & solution

Answer: (C) Hard and brittle materials such as glass, ceramics and gems

An abrasive slurry is hammered by a vibrating tool.

Question 6

What is abrasive jet machining?

  1. Removing material with a high-velocity stream of fine abrasive particles carried by gas
  2. Cutting with a laser
  3. Cutting with sparks
  4. Electrochemical dissolution
Show answer & solution

Answer: (A) Removing material with a high-velocity stream of fine abrasive particles carried by gas

It is used for deburring and cutting thin brittle materials.

Question 7

Which machining process uses a high-pressure water stream, sometimes with abrasive, to cut materials?

  1. ECM
  2. Water jet machining
  3. Broaching
  4. EDM
Show answer & solution

Answer: (B) Water jet machining

It is used for stone, glass, rubber and composites.

Question 8

What is laser beam machining?

  1. Removing material by dissolution
  2. Removing material with sparks
  3. Removing material with abrasives
  4. Removing material by melting and vaporising it with a focused beam of light
Show answer & solution

Answer: (D) Removing material by melting and vaporising it with a focused beam of light

It is used for cutting and drilling small holes.

Question 9

What is CNC machining?

  1. Machining with cams only
  2. Manual machining
  3. Machining in which machine movements are controlled by a computer program
  4. Machining without tools
Show answer & solution

Answer: (C) Machining in which machine movements are controlled by a computer program

CNC machines give high accuracy and repeatability.

Question 10

What do G-codes represent in CNC programming?

  1. Preparatory functions that define tool motion and coordinates
  2. Tool numbers only
  3. Spindle speeds only
  4. Miscellaneous machine functions
Show answer & solution

Answer: (A) Preparatory functions that define tool motion and coordinates

M-codes control functions such as spindle and coolant.

Question 11

What does the G01 code command in CNC programming?

  1. Rapid positioning
  2. Program end
  3. Clockwise circular interpolation
  4. Linear interpolation (straight-line cutting move at feed rate)
Show answer & solution

Answer: (D) Linear interpolation (straight-line cutting move at feed rate)

G00 is rapid traverse.

Question 12

What does G02 command in CNC programming?

  1. Linear interpolation
  2. Clockwise circular interpolation
  3. Counter-clockwise circular interpolation
  4. Rapid positioning
Show answer & solution

Answer: (B) Clockwise circular interpolation

G03 is counter-clockwise circular interpolation.

Question 13

What do G90 and G91 select in CNC programming?

  1. Metric and inch units
  2. Absolute and incremental coordinate modes respectively
  3. Coolant on and off
  4. Spindle on and off
Show answer & solution

Answer: (B) Absolute and incremental coordinate modes respectively

In incremental mode, each move is measured from the previous point.

Question 14

What does the M03 code do in CNC programming?

  1. Starts the spindle rotating clockwise
  2. Stops the spindle
  3. Turns coolant on
  4. Ends the program
Show answer & solution

Answer: (A) Starts the spindle rotating clockwise

M05 stops the spindle and M30 ends the program.

Question 15

In CNC machine axis conventions, which axis is along the main spindle?

  1. Y-axis
  2. A-axis
  3. Z-axis
  4. X-axis
Show answer & solution

Answer: (C) Z-axis

The X-axis is usually the longest horizontal travel.

Question 16

What are the main steps in powder metallurgy?

  1. Melting and casting
  2. Rolling and drawing
  3. Welding and grinding
  4. Blending powders, compacting them in a die and sintering
Show answer & solution

Answer: (D) Blending powders, compacting them in a die and sintering

Parts need little or no machining.

Question 17

Which products are commonly made by powder metallurgy?

  1. Self-lubricating porous bearings and cemented carbide tool tips
  2. Pipes
  3. Rails
  4. Large castings
Show answer & solution

Answer: (A) Self-lubricating porous bearings and cemented carbide tool tips

Porosity can be controlled for oil retention.

Question 18

What is sintering?

  1. Melting the powder completely
  2. Compacting powder at room temperature
  3. Grinding powder
  4. Heating compacted powder below its melting point so that particles bond together
Show answer & solution

Answer: (D) Heating compacted powder below its melting point so that particles bond together

It gives strength to powder metallurgy parts.

Question 19

Which process is most commonly used to make thermoplastic parts such as bottle caps and housings?

  1. Forging
  2. Injection moulding
  3. Compression moulding
  4. Sand casting
Show answer & solution

Answer: (B) Injection moulding

Molten plastic is injected into a cooled mould.

Question 20

Which process is mainly used for moulding thermosetting plastics?

  1. Extrusion only
  2. Injection moulding of thermoplastics only
  3. Compression moulding
  4. Blow moulding
Show answer & solution

Answer: (C) Compression moulding

Heat and pressure cure the plastic in the mould.

Question 21

Which process is used to make plastic bottles?

  1. Compression moulding
  2. Blow moulding
  3. Forging
  4. Rolling
Show answer & solution

Answer: (B) Blow moulding

A hot plastic tube is inflated against a mould.

Question 22

What is additive manufacturing (3D printing)?

  1. Removing material from a block
  2. Casting in sand
  3. Building parts layer by layer directly from a digital model
  4. Forging between dies
Show answer & solution

Answer: (C) Building parts layer by layer directly from a digital model

It is used for prototypes and complex parts.

Question 23

What is electron beam machining?

  1. Cutting with a water jet
  2. Removing material with a focused high-velocity beam of electrons in a vacuum
  3. Removing material with sparks in oil
  4. Grinding with a wheel
Show answer & solution

Answer: (B) Removing material with a focused high-velocity beam of electrons in a vacuum

It drills very small precise holes.

Question 24

What is a flexible manufacturing system (FMS)?

  1. A single lathe
  2. A casting line only
  3. A group of CNC machines linked by automated material handling and controlled by a central computer
  4. A manual workshop
Show answer & solution

Answer: (C) A group of CNC machines linked by automated material handling and controlled by a central computer

It can produce a variety of parts with little changeover.

Question 25

What does CAD/CAM stand for?

  1. Central automated design and machining
  2. Computer-assisted drilling and milling
  3. Computer analysis and data management
  4. Computer-aided design and computer-aided manufacturing
Show answer & solution

Answer: (D) Computer-aided design and computer-aided manufacturing

CAD models are converted into CNC programs by CAM software.

Question 26

What is a part program in CNC machining?

  1. A set of coded instructions that tells the CNC machine how to machine a part
  2. The drawing of the part
  3. The machine manual
  4. The tool list only
Show answer & solution

Answer: (A) A set of coded instructions that tells the CNC machine how to machine a part

It is written using G-codes and M-codes.

Question 27

What is chemical machining (milling)?

  1. Removing material by laser
  2. Removing material by controlled chemical etching of unmasked areas
  3. Removing material by abrasives
  4. Removing material with sparks
Show answer & solution

Answer: (B) Removing material by controlled chemical etching of unmasked areas

It is used for aircraft panels and printed circuit boards.

Question 28

What is plasma arc cutting?

  1. Cutting with oxygen only
  2. Cutting with a saw
  3. Cutting with water
  4. Cutting metal with a very hot, high-velocity jet of ionised gas
Show answer & solution

Answer: (D) Cutting metal with a very hot, high-velocity jet of ionised gas

It can cut stainless steel and aluminium.

Question 29

What is the main limitation of ECM?

  1. It wears the tool quickly
  2. It causes heat damage
  3. High equipment cost and the need to handle and dispose of electrolyte
  4. It works only on non-conductors
Show answer & solution

Answer: (C) High equipment cost and the need to handle and dispose of electrolyte

The tool shape must be designed for the required cavity.

Question 30

What is thermoforming of plastics?

  1. Heating a plastic sheet until soft and forming it over a mould by vacuum or pressure
  2. Compressing thermoset powder
  3. Blowing a tube
  4. Injecting molten plastic
Show answer & solution

Answer: (A) Heating a plastic sheet until soft and forming it over a mould by vacuum or pressure

It is used for packaging trays.

Practice these 30 questions interactively →