Engineering, Management, Agriculture and Veterinary MCQs are now live. FPSC, PPSC, EPE, IELTS & GRE coming soon.

Engineering Materials: Structure of Materials

Mechanical Engineering · Engineering Materials

40 questions, each with the answer and a worked solution.

Practice interactively and track your score →
Question 1

How are engineering materials broadly classified?

  1. Natural and artificial only
  2. Hard and soft only
  3. Solids, liquids and gases
  4. Metals, ceramics, polymers and composites
Show answer & solution

Answer: (D) Metals, ceramics, polymers and composites

Semiconductors and biomaterials are sometimes listed separately.

Question 2

What is a crystalline solid?

  1. A gas
  2. A solid in which atoms are arranged in a regular, repeating three-dimensional pattern
  3. A liquid
  4. A solid with randomly arranged atoms
Show answer & solution

Answer: (B) A solid in which atoms are arranged in a regular, repeating three-dimensional pattern

Most metals are crystalline.

Question 3

What is an amorphous material?

  1. A material with a perfect crystal lattice
  2. A metal with large grains
  3. A solid without a regular long-range atomic arrangement, like a frozen liquid
  4. A pure element only
Show answer & solution

Answer: (C) A solid without a regular long-range atomic arrangement, like a frozen liquid

Glass is the most common amorphous material.

Question 4

What is a unit cell?

  1. The smallest repeating unit of a crystal lattice that shows its full symmetry
  2. A molecule
  3. A single atom
  4. A grain of metal
Show answer & solution

Answer: (A) The smallest repeating unit of a crystal lattice that shows its full symmetry

Stacking unit cells builds the whole crystal.

Question 5

How many atoms belong to one body-centred cubic (BCC) unit cell?

  1. 1
  2. 2
  3. 4
  4. 6
Show answer & solution

Answer: (B) 2

One atom at the centre plus one-eighth of each of the eight corner atoms.

Question 6

How many atoms belong to one face-centred cubic (FCC) unit cell?

  1. 1
  2. 2
  3. 4
  4. 6
Show answer & solution

Answer: (C) 4

Corner atoms give 1 and face atoms give 3.

Question 7

What is the coordination number of an FCC crystal?

  1. 4
  2. 6
  3. 8
  4. 12
Show answer & solution

Answer: (D) 12

BCC has a coordination number of 8.

Question 8

What is the atomic packing factor of the FCC and HCP structures?

  1. 0.52
  2. 0.68
  3. 0.74
  4. 1.0
Show answer & solution

Answer: (C) 0.74

BCC has 0.68 and simple cubic 0.52.

Question 9

Which crystal structure do alpha iron, chromium, tungsten and molybdenum have at room temperature?

  1. Body-centred cubic
  2. Face-centred cubic
  3. Simple cubic
  4. Hexagonal close-packed
Show answer & solution

Answer: (A) Body-centred cubic

BCC metals are strong but less ductile than FCC metals.

Question 10

Which crystal structure do aluminium, copper, nickel, silver, gold and lead have?

  1. Hexagonal close-packed
  2. Face-centred cubic
  3. Body-centred cubic
  4. Simple cubic
Show answer & solution

Answer: (B) Face-centred cubic

Gamma iron (austenite) is also FCC.

Question 11

Which crystal structure do zinc, magnesium, cadmium and alpha titanium have?

  1. Hexagonal close-packed
  2. Simple cubic
  3. Body-centred cubic
  4. Face-centred cubic
Show answer & solution

Answer: (A) Hexagonal close-packed

HCP metals have fewer slip systems and are less ductile.

Question 12

Which crystal structure usually gives the most ductile metals?

  1. Body-centred cubic
  2. Simple cubic
  3. Hexagonal close-packed
  4. Face-centred cubic
Show answer & solution

Answer: (D) Face-centred cubic

FCC metals have many close-packed slip systems.

Question 13

What are Miller indices?

  1. A measure of hardness
  2. A notation that describes planes and directions in a crystal lattice
  3. A type of crystal defect
  4. A grain size number
Show answer & solution

Answer: (B) A notation that describes planes and directions in a crystal lattice

They are the reciprocals of the intercepts of a plane on the axes.

Question 14

What is a vacancy in a crystal?

  1. A lattice site from which an atom is missing
  2. A grain boundary
  3. An extra atom in the lattice
  4. A line defect
Show answer & solution

Answer: (A) A lattice site from which an atom is missing

Vacancies help atoms diffuse.

Question 15

What is a dislocation?

  1. A grain boundary
  2. A missing atom
  3. A line defect in a crystal around which atoms are misaligned
  4. A crack
Show answer & solution

Answer: (C) A line defect in a crystal around which atoms are misaligned

Movement of dislocations causes plastic deformation.

Question 16

What are the two basic types of dislocation?

  1. Grain and twin
  2. Frenkel and Schottky
  3. Vacancy and interstitial
  4. Edge and screw dislocations
Show answer & solution

Answer: (D) Edge and screw dislocations

Mixed dislocations have features of both.

Question 17

What is a grain boundary?

  1. A line of missing atoms
  2. The interface between two grains of different crystal orientation
  3. A surface coating
  4. A crack
Show answer & solution

Answer: (B) The interface between two grains of different crystal orientation

Grain boundaries block dislocation movement.

Question 18

How does reducing grain size affect the strength of a metal?

  1. It reduces strength
  2. It makes the metal brittle only
  3. It has no effect
  4. It increases strength and toughness
Show answer & solution

Answer: (D) It increases strength and toughness

This is described by the Hall–Petch relation.

Question 19

What is a solid solution?

  1. A mixture of two separate phases
  2. A liquid alloy
  3. A homogeneous crystalline phase containing two or more elements dissolved in each other
  4. A compound with fixed formula
Show answer & solution

Answer: (C) A homogeneous crystalline phase containing two or more elements dissolved in each other

Solid solutions may be substitutional or interstitial.

Question 20

What is a substitutional solid solution?

  1. One in which solute atoms replace solvent atoms in the lattice
  2. One in which solute atoms fit between solvent atoms
  3. A mixture of crystals
  4. A chemical compound
Show answer & solution

Answer: (A) One in which solute atoms replace solvent atoms in the lattice

Brass (copper with zinc) is an example.

Question 21

What is an interstitial solid solution?

  1. A mixture of two metals
  2. One in which solute atoms replace solvent atoms
  3. A liquid solution
  4. One in which small solute atoms occupy spaces between the solvent atoms
Show answer & solution

Answer: (D) One in which small solute atoms occupy spaces between the solvent atoms

Carbon in iron is an example.

Question 22

What do the Hume-Rothery rules describe?

  1. Conditions for extensive substitutional solid solubility, such as similar atomic size, crystal structure and valency
  2. Rules for heat treatment
  3. Rules for crystal defects
  4. Rules for corrosion
Show answer & solution

Answer: (A) Conditions for extensive substitutional solid solubility, such as similar atomic size, crystal structure and valency

Atomic sizes should differ by less than about 15%.

Question 23

Which pair of metals is completely soluble in each other in the solid state?

  1. Copper and lead
  2. Iron and lead
  3. Copper and nickel
  4. Aluminium and lead
Show answer & solution

Answer: (C) Copper and nickel

They have the same FCC structure and similar atomic sizes.

Question 24

What is allotropy (polymorphism)?

  1. The melting of a metal
  2. The ability of a material to exist in different crystal structures at different temperatures
  3. The presence of impurities
  4. The formation of alloys
Show answer & solution

Answer: (B) The ability of a material to exist in different crystal structures at different temperatures

Iron is the most important allotropic metal.

Question 25

What is strain hardening (work hardening)?

  1. Increase in strength and hardness of a metal caused by plastic deformation at low temperature
  2. Hardening by quenching
  3. Hardening by adding carbon
  4. Softening by heating
Show answer & solution

Answer: (A) Increase in strength and hardness of a metal caused by plastic deformation at low temperature

It is due to the multiplication and tangling of dislocations.

Question 26

What happens when a severely cold-worked metal is deformed strongly in one direction?

  1. It becomes perfectly isotropic
  2. It becomes anisotropic, with different properties in different directions
  3. It melts
  4. It loses all strength
Show answer & solution

Answer: (B) It becomes anisotropic, with different properties in different directions

Grains become elongated in the working direction.

Question 27

What is the recrystallisation temperature?

  1. The boiling point
  2. The melting temperature
  3. The temperature at which new strain-free grains first form in a cold-worked metal
  4. The temperature at which grains stop growing
Show answer & solution

Answer: (C) The temperature at which new strain-free grains first form in a cold-worked metal

It is roughly 0.3–0.5 of the absolute melting temperature.

Question 28

What are the three stages that occur when a cold-worked metal is heated?

  1. Melting, boiling and freezing
  2. Nucleation, melting and solidification
  3. Hardening, tempering and quenching
  4. Recovery, recrystallisation and grain growth
Show answer & solution

Answer: (D) Recovery, recrystallisation and grain growth

Prolonged heating causes coarse grains.

Question 29

How does increasing the amount of prior cold work affect recrystallisation temperature?

  1. It raises it
  2. It has no effect
  3. It lowers it
  4. It makes recrystallisation impossible
Show answer & solution

Answer: (C) It lowers it

More stored energy drives recrystallisation at lower temperatures.

Question 30

What is the Bauschinger effect?

  1. A crystal defect
  2. A reduction in yield strength in compression after a metal has been plastically deformed in tension
  3. An increase in hardness by heating
  4. A type of corrosion
Show answer & solution

Answer: (B) A reduction in yield strength in compression after a metal has been plastically deformed in tension

It matters in parts subjected to reversed loading.

Question 31

What does the Gibbs phase rule state for a system at constant pressure?

  1. F = C + P
  2. F = P − C
  3. F = C × P
  4. F = C − P + 1
Show answer & solution

Answer: (D) F = C − P + 1

F is degrees of freedom, C components and P phases.

Question 32

What does the lever rule give in a binary phase diagram?

  1. The relative amounts of phases present in a two-phase region
  2. The temperature of melting
  3. The crystal structure
  4. The hardness
Show answer & solution

Answer: (A) The relative amounts of phases present in a two-phase region

It uses tie lines across the two-phase field.

Question 33

What is a eutectic reaction?

  1. A liquid transforms on cooling into two solid phases at a fixed temperature
  2. A liquid and solid form another solid
  3. A solid transforms into two other solids
  4. A solid melts
Show answer & solution

Answer: (A) A liquid transforms on cooling into two solid phases at a fixed temperature

The eutectic composition has the lowest melting point in the system.

Question 34

What is a eutectoid reaction?

  1. A solid melts
  2. A solid phase transforms on cooling into two other solid phases
  3. A liquid forms two solids
  4. Two liquids form a solid
Show answer & solution

Answer: (B) A solid phase transforms on cooling into two other solid phases

In steel, austenite forms pearlite in a eutectoid reaction.

Question 35

What is a peritectic reaction?

  1. A solid forms two solids
  2. A solid melts
  3. A liquid and one solid react on cooling to form a different solid phase
  4. A liquid forms two solids
Show answer & solution

Answer: (C) A liquid and one solid react on cooling to form a different solid phase

It occurs at the high-temperature end of the iron–carbon diagram.

Question 36

What is creep and where is it important?

  1. Elastic recovery
  2. Rapid fracture
  3. Wear of surfaces
  4. Slow plastic deformation under constant stress over time, important in gas turbine blades and boilers
Show answer & solution

Answer: (D) Slow plastic deformation under constant stress over time, important in gas turbine blades and boilers

Creep increases with temperature.

Question 37

What is stress relaxation?

  1. A gradual decrease in stress in a material held at constant strain
  2. A sudden fracture
  3. A type of heat treatment
  4. An increase in stress
Show answer & solution

Answer: (A) A gradual decrease in stress in a material held at constant strain

It loosens bolted joints at high temperature.

Question 38

How does lowering the temperature generally affect the strength of most metals?

  1. They become zero
  2. They decrease
  3. Yield and ultimate strength increase
  4. They stay the same
Show answer & solution

Answer: (C) Yield and ultimate strength increase

However, many steels become brittle at very low temperatures.

Question 39

What is hot hardness?

  1. Hardness after quenching
  2. Hardness of hot-rolled steel
  3. Hardness at room temperature
  4. The ability of a material to retain its hardness at high temperatures
Show answer & solution

Answer: (D) The ability of a material to retain its hardness at high temperatures

It is essential for cutting tools.

Question 40

What is malleability?

  1. The ability to be drawn into wires
  2. The ability of a material to undergo large permanent deformation in compression, such as being hammered into sheets
  3. The ability to resist scratching
  4. The ability to return to shape
Show answer & solution

Answer: (B) The ability of a material to undergo large permanent deformation in compression, such as being hammered into sheets

Ductility relates to deformation in tension.

Practice these 40 questions interactively →