Engineering, Management, Agriculture and Veterinary MCQs are now live. FPSC, PPSC, EPE, IELTS & GRE coming soon.

Engineering Materials: Alloy Steels

Mechanical Engineering · Engineering Materials

32 questions, each with the answer and a worked solution.

Practice interactively and track your score →
Question 1

What is an alloy steel?

  1. Cast iron
  2. Plain carbon steel
  3. A steel containing alloying elements, such as nickel, chromium or molybdenum, in amounts that change its properties
  4. Pure iron
Show answer & solution

Answer: (C) A steel containing alloying elements, such as nickel, chromium or molybdenum, in amounts that change its properties

Alloy steels have better hardenability and special properties.

Question 2

What is the main effect of nickel in steel?

  1. It improves machinability
  2. It makes steel brittle
  3. It increases toughness, ductility, strength and corrosion resistance
  4. It reduces strength
Show answer & solution

Answer: (C) It increases toughness, ductility, strength and corrosion resistance

Nickel stabilises austenite.

Question 3

What is the main effect of chromium in steel?

  1. It increases hardenability, wear resistance and corrosion resistance
  2. It improves machinability
  3. It makes steel softer
  4. It reduces hardness
Show answer & solution

Answer: (A) It increases hardenability, wear resistance and corrosion resistance

Chromium above about 11% makes steel stainless.

Question 4

What minimum chromium content is needed for stainless steel?

  1. About 1%
  2. About 3%
  3. About 10.5–12%
  4. About 30%
Show answer & solution

Answer: (C) About 10.5–12%

Chromium forms a thin protective oxide film.

Question 5

What is 18/8 stainless steel?

  1. A high-speed steel
  2. An austenitic stainless steel with about 18% chromium and 8% nickel
  3. A tool steel
  4. A cast iron
Show answer & solution

Answer: (B) An austenitic stainless steel with about 18% chromium and 8% nickel

It is non-magnetic and cannot be hardened by heat treatment.

Question 6

Which type of stainless steel is used for cutlery and surgical instruments that need hardness?

  1. Ferritic stainless steel only
  2. Duplex stainless steel only
  3. Austenitic stainless steel
  4. Martensitic stainless steel
Show answer & solution

Answer: (D) Martensitic stainless steel

It has enough carbon to harden by quenching.

Question 7

What is weld decay in stainless steel?

  1. Intergranular corrosion caused by chromium carbide precipitation at grain boundaries near welds
  2. Cracking due to hydrogen
  3. Pitting by chlorides only
  4. Rusting of mild steel
Show answer & solution

Answer: (A) Intergranular corrosion caused by chromium carbide precipitation at grain boundaries near welds

Low-carbon (L) grades or titanium-stabilised grades prevent it.

Question 8

What is the main effect of manganese in steel?

  1. It causes hot shortness
  2. It makes steel non-magnetic at low amounts
  3. It reduces strength
  4. It deoxidises, combines with sulphur and increases strength and hardenability
Show answer & solution

Answer: (D) It deoxidises, combines with sulphur and increases strength and hardenability

All steels contain some manganese.

Question 9

What is Hadfield manganese steel?

  1. A stainless steel
  2. A steel with about 12–14% manganese that becomes very hard when worked or impacted
  3. A low-carbon structural steel
  4. A tool steel with tungsten
Show answer & solution

Answer: (B) A steel with about 12–14% manganese that becomes very hard when worked or impacted

It is used for crusher jaws, rail crossings and excavator teeth.

Question 10

What is the main effect of tungsten in steel?

  1. It reduces hardness
  2. It makes steel ductile
  3. It improves weldability only
  4. It gives hot hardness and wear resistance and refines grain
Show answer & solution

Answer: (D) It gives hot hardness and wear resistance and refines grain

It is the main element of high-speed steel.

Question 11

What is the main effect of molybdenum in steel?

  1. It increases high-temperature strength and hardenability and reduces temper brittleness
  2. It causes brittleness
  3. It improves machinability
  4. It reduces strength
Show answer & solution

Answer: (A) It increases high-temperature strength and hardenability and reduces temper brittleness

It is used in boiler and pressure vessel steels.

Question 12

What is the main effect of vanadium in steel?

  1. It causes grain growth
  2. It refines grain size and forms very hard carbides that increase wear resistance
  3. It removes sulphur
  4. It reduces hardness
Show answer & solution

Answer: (B) It refines grain size and forms very hard carbides that increase wear resistance

Small additions are very effective grain refiners.

Question 13

What is the main effect of cobalt in high-speed steel?

  1. It reduces hot hardness
  2. It removes carbon
  3. It improves hot hardness and cutting ability
  4. It increases ductility only
Show answer & solution

Answer: (C) It improves hot hardness and cutting ability

Cobalt reduces hardenability, unlike most alloying elements.

Question 14

What is the main effect of silicon in steel?

  1. It acts as a deoxidiser and improves magnetic properties and elasticity
  2. It improves machinability
  3. It causes hot shortness
  4. It reduces strength
Show answer & solution

Answer: (A) It acts as a deoxidiser and improves magnetic properties and elasticity

Silicon steels are used in transformer cores and springs.

Question 15

Which elements are added to make free-cutting (free-machining) steels?

  1. Nickel and chromium
  2. Molybdenum and vanadium
  3. Tungsten and cobalt
  4. Sulphur, lead and phosphorus
Show answer & solution

Answer: (D) Sulphur, lead and phosphorus

They help chips break easily.

Question 16

Which element is added in very small amounts (a few thousandths of a percent) to increase hardenability greatly?

  1. Lead
  2. Sulphur
  3. Boron
  4. Copper
Show answer & solution

Answer: (C) Boron

It is cheaper than other hardenability elements.

Question 17

Which alloying elements improve corrosion resistance of steel?

  1. Carbon only
  2. Chromium and nickel
  3. Lead and tin
  4. Sulphur and phosphorus
Show answer & solution

Answer: (B) Chromium and nickel

Copper also improves atmospheric corrosion resistance.

Question 18

What is the binding material in cemented carbide tools?

  1. Cobalt
  2. Nickel
  3. Copper
  4. Iron
Show answer & solution

Answer: (A) Cobalt

Tungsten carbide grains are held in a cobalt matrix.

Question 19

What is Invar?

  1. A copper alloy
  2. A stainless steel
  3. An iron–nickel alloy (about 36% nickel) with a very low coefficient of thermal expansion
  4. A tool steel
Show answer & solution

Answer: (C) An iron–nickel alloy (about 36% nickel) with a very low coefficient of thermal expansion

It is used for surveying tapes and precision instruments.

Question 20

What is Elinvar used for?

  1. Cutting tools
  2. Hairsprings of watches, because its elasticity hardly changes with temperature
  3. Bearings
  4. Electrical wires
Show answer & solution

Answer: (B) Hairsprings of watches, because its elasticity hardly changes with temperature

It is a nickel–iron–chromium alloy.

Question 21

What is Permalloy?

  1. A copper–tin alloy
  2. An aluminium alloy
  3. A nickel–iron alloy with very high magnetic permeability
  4. A stainless steel
Show answer & solution

Answer: (C) A nickel–iron alloy with very high magnetic permeability

It is used in magnetic shielding and transformer cores.

Question 22

What is Alnico used for?

  1. Heating elements
  2. Bearings
  3. Cutting tools
  4. Permanent magnets
Show answer & solution

Answer: (D) Permanent magnets

It is an alloy of aluminium, nickel, cobalt and iron.

Question 23

What is maraging steel?

  1. A cast iron
  2. A very high-strength, low-carbon nickel steel hardened by precipitation during ageing
  3. A plain carbon steel
  4. A stainless steel for cutlery
Show answer & solution

Answer: (B) A very high-strength, low-carbon nickel steel hardened by precipitation during ageing

It is used in aerospace and tooling.

Question 24

What material are ball bearing balls usually made of?

  1. High-carbon chromium steel
  2. Mild steel
  3. Cast iron
  4. Brass
Show answer & solution

Answer: (A) High-carbon chromium steel

It is hardened to give high wear resistance.

Question 25

What material is commonly used for heavy-duty leaf and coil springs?

  1. Grey cast iron
  2. Aluminium
  3. Mild steel
  4. High-carbon or silicon–manganese spring steel
Show answer & solution

Answer: (D) High-carbon or silicon–manganese spring steel

Spring steels have high elastic limits.

Question 26

Which steel is generally used for connecting rods and crankshafts?

  1. High-speed steel
  2. Grey cast iron
  3. Medium-carbon or low-alloy steel
  4. Pure iron
Show answer & solution

Answer: (C) Medium-carbon or low-alloy steel

They are forged and heat treated for toughness.

Question 27

Why are nickel and chromium not added to steel to improve machinability?

  1. They make steel brittle
  2. They have no effect
  3. They increase strength and toughness, which makes machining harder
  4. They make steel very soft
Show answer & solution

Answer: (C) They increase strength and toughness, which makes machining harder

Sulphur and lead are used to improve machinability.

Question 28

Which alloying element increases the depth of hardening of steel most economically?

  1. Phosphorus
  2. Lead
  3. Sulphur
  4. Chromium (also manganese and molybdenum)
Show answer & solution

Answer: (D) Chromium (also manganese and molybdenum)

Greater hardenability allows thicker sections to harden throughout.

Question 29

Which element is the most effective inhibitor of grain growth when added in small quantities?

  1. Nickel
  2. Vanadium
  3. Lead
  4. Copper
Show answer & solution

Answer: (B) Vanadium

Aluminium and titanium also restrict grain growth.

Question 30

Which element cannot impart high strength to steel at elevated temperatures?

  1. Magnesium
  2. Chromium
  3. Tungsten
  4. Molybdenum
Show answer & solution

Answer: (A) Magnesium

Molybdenum and tungsten raise high-temperature strength.

Question 31

What is the effect of tungsten in high-speed steel?

  1. It makes the steel soft
  2. It improves ductility only
  3. It provides hot hardness so the tool keeps its edge at high cutting temperatures
  4. It removes carbon
Show answer & solution

Answer: (C) It provides hot hardness so the tool keeps its edge at high cutting temperatures

HSS stays hard up to about 600 °C.

Question 32

What are austenitic stainless steels known for?

  1. High hardness after quenching
  2. Low cost
  3. Excellent corrosion resistance, toughness and being non-magnetic
  4. Brittleness
Show answer & solution

Answer: (C) Excellent corrosion resistance, toughness and being non-magnetic

They can be strengthened by cold working.

Practice these 32 questions interactively →