Engineering, Management, Agriculture and Veterinary MCQs are now live. FPSC, PPSC, EPE, IELTS & GRE coming soon.

Engineering Materials: Polymers, Ceramics and Corrosion

Mechanical Engineering · Engineering Materials

32 questions, each with the answer and a worked solution.

Practice interactively and track your score →
Question 1

What are polymers?

  1. Pure metals
  2. Large molecules made of many repeating units (monomers) joined together
  3. Crystalline ceramics
  4. Glass fibres
Show answer & solution

Answer: (B) Large molecules made of many repeating units (monomers) joined together

Plastics and rubbers are polymers.

Question 2

What is a thermoplastic?

  1. A polymer that sets permanently on heating
  2. A metal
  3. A polymer that softens when heated and hardens on cooling, and can be remelted
  4. A ceramic
Show answer & solution

Answer: (C) A polymer that softens when heated and hardens on cooling, and can be remelted

Polyethylene, PVC, polypropylene and nylon are thermoplastics.

Question 3

What is a thermosetting plastic?

  1. A polymer that softens on heating
  2. A rubber only
  3. A metal
  4. A polymer that sets permanently on heating and cannot be remelted
Show answer & solution

Answer: (D) A polymer that sets permanently on heating and cannot be remelted

Bakelite, epoxy and melamine are thermosets.

Question 4

What is Bakelite?

  1. A thermoplastic
  2. A thermosetting phenol–formaldehyde resin
  3. A ceramic
  4. A metal alloy
Show answer & solution

Answer: (B) A thermosetting phenol–formaldehyde resin

It is used for electrical switches and handles.

Question 5

Which polymer is known for its very low coefficient of friction and chemical resistance?

  1. PTFE (Teflon)
  2. Bakelite
  3. PVC
  4. Polystyrene
Show answer & solution

Answer: (A) PTFE (Teflon)

It is used for non-stick coatings and seals.

Question 6

What is vulcanisation of rubber?

  1. Adding plasticiser
  2. Heating rubber with sulphur to form cross-links, making it stronger and more elastic
  3. Cooling rubber
  4. Melting rubber
Show answer & solution

Answer: (B) Heating rubber with sulphur to form cross-links, making it stronger and more elastic

It was discovered by Charles Goodyear.

Question 7

What is an elastomer?

  1. A polymer that can be stretched greatly and returns to its original shape
  2. A ceramic
  3. A metal
  4. A brittle plastic
Show answer & solution

Answer: (A) A polymer that can be stretched greatly and returns to its original shape

Rubber is an elastomer with a non-linear stress–strain curve.

Question 8

What is the glass transition temperature of a polymer?

  1. The boiling point
  2. The decomposition temperature
  3. The temperature below which an amorphous polymer becomes hard and glassy
  4. The melting point of crystals
Show answer & solution

Answer: (C) The temperature below which an amorphous polymer becomes hard and glassy

Above it, the polymer becomes rubbery.

Question 9

What are ceramics?

  1. Metals
  2. Plastics
  3. Rubbers
  4. Inorganic, non-metallic materials that are hard, brittle and resistant to heat
Show answer & solution

Answer: (D) Inorganic, non-metallic materials that are hard, brittle and resistant to heat

Bricks, porcelain and alumina are ceramics.

Question 10

What is the main constituent of corundum?

  1. Magnesia
  2. Silica
  3. Aluminium oxide (Al₂O₃)
  4. Silicon carbide
Show answer & solution

Answer: (C) Aluminium oxide (Al₂O₃)

It is used as an abrasive.

Question 11

What type of refractory is made mainly of silica?

  1. Metallic refractory
  2. Acid refractory
  3. Neutral refractory
  4. Basic refractory
Show answer & solution

Answer: (B) Acid refractory

Magnesite and dolomite are basic refractories.

Question 12

Which of the following is a neutral refractory?

  1. Silica
  2. Dolomite
  3. Magnesite
  4. Chromite (or graphite)
Show answer & solution

Answer: (D) Chromite (or graphite)

Neutral refractories resist both acid and basic slags.

Question 13

What material is commonly used for foundry crucibles?

  1. Graphite (clay–graphite)
  2. Lead
  3. Copper
  4. Aluminium
Show answer & solution

Answer: (A) Graphite (clay–graphite)

Graphite resists high temperature and thermal shock.

Question 14

What is a composite material?

  1. A material made of two or more distinct constituents combined to give better properties
  2. A pure metal
  3. An alloy in solid solution
  4. A single polymer
Show answer & solution

Answer: (A) A material made of two or more distinct constituents combined to give better properties

Glass-fibre reinforced plastic and reinforced concrete are composites.

Question 15

What is the role of fibres in a fibre-reinforced composite?

  1. To add colour
  2. To carry most of the load and increase strength and stiffness
  3. To bind the matrix
  4. To reduce strength
Show answer & solution

Answer: (B) To carry most of the load and increase strength and stiffness

The matrix holds fibres together and transfers load.

Question 16

What is CFRP?

  1. A copper alloy
  2. Cast iron with carbon flakes
  3. A ceramic
  4. Carbon fibre reinforced polymer, a light and very stiff composite
Show answer & solution

Answer: (D) Carbon fibre reinforced polymer, a light and very stiff composite

It is used in aircraft, racing cars and sports goods.

Question 17

What is corrosion?

  1. Wear by friction
  2. Creep
  3. The gradual destruction of a metal by chemical or electrochemical reaction with its environment
  4. Fatigue failure
Show answer & solution

Answer: (C) The gradual destruction of a metal by chemical or electrochemical reaction with its environment

Rusting of iron is the most common example.

Question 18

What is galvanic corrosion?

  1. Corrosion by heat only
  2. Corrosion of the more active metal when two dissimilar metals are in electrical contact in an electrolyte
  3. Corrosion under stress only
  4. Corrosion of a single pure metal in air
Show answer & solution

Answer: (B) Corrosion of the more active metal when two dissimilar metals are in electrical contact in an electrolyte

The more noble metal is protected.

Question 19

What is cathodic protection?

  1. Protecting a metal by making it the cathode, using a sacrificial anode or impressed current
  2. Painting the metal
  3. Coating with oil
  4. Heating the metal
Show answer & solution

Answer: (A) Protecting a metal by making it the cathode, using a sacrificial anode or impressed current

Zinc or magnesium anodes protect pipelines and ship hulls.

Question 20

What is stress corrosion cracking?

  1. Wear
  2. Cracking due to fatigue only
  3. Uniform rusting
  4. Cracking caused by the combined effect of tensile stress and a corrosive environment
Show answer & solution

Answer: (D) Cracking caused by the combined effect of tensile stress and a corrosive environment

Brass in ammonia and stainless steel in chlorides are examples.

Question 21

What is pitting corrosion?

  1. Corrosion at grain boundaries only
  2. Uniform thinning of the surface
  3. Localised corrosion that forms small, deep pits in the metal surface
  4. Cracking under stress
Show answer & solution

Answer: (C) Localised corrosion that forms small, deep pits in the metal surface

Chlorides commonly cause pitting in stainless steels.

Question 22

What is the pH of a neutral solution?

  1. 0
  2. 1
  3. 7
  4. 14
Show answer & solution

Answer: (C) 7

Acidic solutions have pH below 7, and basic solutions above 7.

Question 23

Which elements are most widely used as semiconductors in electronic devices?

  1. Copper
  2. Aluminium
  3. Iron
  4. Silicon (and germanium)
Show answer & solution

Answer: (D) Silicon (and germanium)

Silicon is used in most transistors and integrated circuits.

Question 24

What is doping of a semiconductor?

  1. Adding small amounts of impurity atoms to change its electrical conductivity
  2. Cooling it to absolute zero
  3. Heating it to melt
  4. Coating with metal
Show answer & solution

Answer: (A) Adding small amounts of impurity atoms to change its electrical conductivity

Phosphorus gives n-type and boron gives p-type silicon.

Question 25

What is polymerisation?

  1. Breaking polymers into monomers
  2. The chemical process of joining many small monomer molecules into a large polymer chain
  3. Vulcanising rubber only
  4. Melting plastics
Show answer & solution

Answer: (B) The chemical process of joining many small monomer molecules into a large polymer chain

It may be addition or condensation polymerisation.

Question 26

What happens to molecules during polymerisation?

  1. They become smaller
  2. They evaporate
  3. They join to form larger molecules
  4. They change into metal atoms
Show answer & solution

Answer: (C) They join to form larger molecules

Polyethylene is made by addition polymerisation of ethylene.

Question 27

What is PVC?

  1. A ceramic
  2. Polyvinyl chloride, a thermoplastic used for pipes, cables and window frames
  3. A rubber
  4. A thermosetting resin
Show answer & solution

Answer: (B) Polyvinyl chloride, a thermoplastic used for pipes, cables and window frames

Plasticisers make PVC flexible.

Question 28

What is nylon?

  1. A thermoset
  2. A natural rubber
  3. A ceramic
  4. A polyamide thermoplastic with high strength and wear resistance
Show answer & solution

Answer: (D) A polyamide thermoplastic with high strength and wear resistance

It is used for gears, bearings and fibres.

Question 29

Why are ceramics brittle?

  1. Their ionic and covalent bonds prevent dislocation movement, so they cannot deform plastically
  2. They are always porous
  3. They have many slip systems
  4. They are soft
Show answer & solution

Answer: (A) Their ionic and covalent bonds prevent dislocation movement, so they cannot deform plastically

Small flaws cause sudden fracture.

Question 30

What is glass?

  1. An amorphous, non-crystalline ceramic made mainly of silica
  2. A crystalline metal
  3. A polymer
  4. A composite
Show answer & solution

Answer: (A) An amorphous, non-crystalline ceramic made mainly of silica

It softens gradually rather than melting at a fixed point.

Question 31

What is the main advantage of composites over conventional materials?

  1. They are always cheap
  2. They are easy to recycle
  3. They conduct electricity well
  4. High strength-to-weight ratio and properties tailored to the application
Show answer & solution

Answer: (D) High strength-to-weight ratio and properties tailored to the application

Fibre direction can be chosen to match loads.

Question 32

Why is zinc used as a sacrificial anode to protect steel?

  1. Zinc does not corrode
  2. Zinc is more active than steel, so it corrodes first and protects the steel
  3. Zinc is more noble than steel
  4. Zinc is harder than steel
Show answer & solution

Answer: (B) Zinc is more active than steel, so it corrodes first and protects the steel

This principle is also used in galvanising.

Practice these 32 questions interactively →