What are the allotropic forms of pure iron?
Show answer & solution
Answer: (A) Alpha (α), gamma (γ) and delta (δ) iron
The forms change with temperature.
Mechanical Engineering · Engineering Materials
48 questions, each with the answer and a worked solution.
Practice interactively and track your score →What are the allotropic forms of pure iron?
Answer: (A) Alpha (α), gamma (γ) and delta (δ) iron
The forms change with temperature.
Between which temperatures does gamma iron (austenite) exist in pure iron?
Answer: (B) 910 °C and 1400 °C
It has an FCC structure.
Between which temperatures does delta iron exist?
Answer: (D) 1400 °C to 1539 °C (melting point)
Delta iron has a BCC structure.
What is the melting point of pure iron?
Answer: (D) About 1539 °C
Copper melts at about 1083 °C and aluminium at about 660 °C.
At what temperature does alpha iron lose its ferromagnetism (Curie point)?
Answer: (B) About 770 °C
Iron above this temperature is paramagnetic.
What is ferrite?
Answer: (C) A solid solution of a very small amount of carbon in alpha iron, with a BCC structure
It is the softest and weakest constituent of steel.
What is the maximum solubility of carbon in ferrite?
Answer: (A) About 0.022–0.025%
Ferrite is almost pure iron.
What is austenite?
Answer: (C) A solid solution of carbon in gamma iron, with an FCC structure
It is non-magnetic and ductile.
What is the maximum solubility of carbon in austenite?
Answer: (C) About 2.1% at 1147 °C
Older texts give this value as 1.7%.
What is cementite?
Answer: (B) Iron carbide (Fe₃C), containing 6.67% carbon, which is very hard and brittle
It is the hardest constituent in slowly cooled steels.
What is pearlite?
Answer: (A) A lamellar mixture of ferrite and cementite formed from austenite at the eutectoid point
It looks like mother-of-pearl under the microscope.
What is the carbon content of eutectoid steel?
Answer: (B) About 0.8%
Its structure is fully pearlitic when slowly cooled.
At what temperature does the eutectoid reaction occur in the iron–carbon system?
Answer: (A) About 727 °C (often given as 723 °C)
This is the lower critical temperature A₁.
What is ledeburite?
Answer: (D) The eutectic mixture of austenite and cementite formed at 4.3% carbon and 1147 °C
It is found in white cast iron.
What are hypoeutectoid steels?
Answer: (C) Steels with less than 0.8% carbon, containing ferrite and pearlite
Most structural steels are hypoeutectoid.
What are hypereutectoid steels?
Answer: (D) Steels with 0.8% to about 2.1% carbon, containing pearlite and cementite
Tool steels are often hypereutectoid.
What is the usual dividing line between steel and cast iron by carbon content?
Answer: (C) About 2% carbon
Cast irons contain more than about 2% carbon.
What is pig iron?
Answer: (D) The product of the blast furnace obtained by reducing iron ore, containing about 3.5–4.5% carbon
It is the raw material for steel and cast iron.
Which iron ore has the highest iron content?
Answer: (B) Magnetite (Fe₃O₄)
Haematite is the most widely mined iron ore.
What is coke used for in a blast furnace?
Answer: (A) As fuel and as a reducing agent for iron ore
Limestone is used as the flux.
What is wrought iron?
Answer: (C) Nearly pure iron containing fibres of slag, made by puddling
It is tough, ductile and easily welded.
Along which direction is the tensile strength of wrought iron maximum?
Answer: (A) Along the lines of slag distribution (the fibres)
Its strength is not uniform in all directions.
What is grey cast iron?
Answer: (D) Cast iron in which most carbon is present as graphite flakes, formed by slow cooling
Its fracture surface looks grey.
What is the usual carbon content of grey cast iron?
Answer: (C) About 2.5–4%
It also contains about 1–3% silicon.
Which element promotes the formation of free graphite in cast iron?
Answer: (B) Silicon
Sulphur and rapid cooling promote cementite instead.
What are the main advantages of grey cast iron?
Answer: (D) Good castability, machinability, damping capacity and compressive strength
It is widely used for machine beds and engine blocks.
Why is grey cast iron preferred for machine tool beds?
Answer: (A) It has excellent vibration damping
Graphite flakes absorb vibrations.
What is white cast iron?
Answer: (B) Cast iron in which carbon is present as cementite, formed by rapid cooling, making it hard and brittle
Its fracture surface is white and shiny.
What is chilled cast iron?
Answer: (C) Cast iron with a hard white iron surface layer produced by rapid cooling against metal chills
It is used for rolls and wheels that need wear-resistant surfaces.
How is malleable cast iron produced?
Answer: (A) By prolonged annealing of white cast iron, which turns cementite into nodular aggregates of graphite (temper carbon)
It is tougher and more ductile than grey iron.
How is ductile (nodular or spheroidal graphite) cast iron produced?
Answer: (B) By adding small amounts of magnesium or cerium to molten iron to form spheroidal graphite
It has strength and ductility approaching steel.
What is mottled cast iron?
Answer: (D) Cast iron with carbon partly free as graphite and partly combined as cementite
It lies between grey and white cast iron.
What effect does sulphur have on cast iron?
Answer: (C) It makes the iron hard and the casting unsound by promoting cementite
Manganese is added to neutralise sulphur.
Which steelmaking process produces most of the world's steel from molten pig iron?
Answer: (D) Basic oxygen furnace (LD process)
Pure oxygen is blown onto molten iron to remove carbon.
Which furnace is mainly used to make steel from scrap?
Answer: (A) Electric arc furnace
Many Pakistani steel re-rolling mills use electric arc or induction furnaces.
What are killed steels?
Answer: (B) Steels fully deoxidised in the ladle with silicon or aluminium so that no gas is evolved on solidification
Rimmed steels are only partly deoxidised.
What is the carbon content of low-carbon (mild) steel?
Answer: (B) Up to about 0.3% (mild steel about 0.15–0.25%)
It is used for sheets, wires, rods and structural sections.
What is the carbon content range of medium-carbon steel?
Answer: (D) About 0.3–0.6%
It is used for shafts, axles, crankshafts and connecting rods.
What is the carbon content range of high-carbon steel?
Answer: (A) About 0.6–1.5%
It is used for springs, hammers, chisels and cutting tools.
What type of steel is commonly used for railway rails?
Answer: (C) Medium-to-high carbon steel with about 0.6–0.8% carbon
It needs high strength and wear resistance.
What carbon content is typical of taps, dies and drills made from plain carbon tool steel?
Answer: (B) More than about 1%
High carbon gives high hardness after hardening.
What effect does phosphorus have on steel?
Answer: (D) It causes cold shortness (brittleness at low temperature)
Phosphorus content is kept low.
What effect does sulphur have on steel?
Answer: (C) It causes hot shortness and lowers toughness and transverse ductility
Manganese forms MnS to counter its effect.
What is the specific gravity of cast iron compared with steel?
Answer: (A) Slightly lower, about 7.2 compared with 7.85
Graphite lowers the density of cast iron.
What is the structure of pure iron at room temperature?
Answer: (C) Ferrite
It is BCC alpha iron.
What is the metallic structure of mild steel?
Answer: (B) Body-centred cubic ferrite with some pearlite
Mild steel has low carbon and is mostly ferrite.
What property makes cast iron unique among common engineering metals?
Answer: (D) High damping capacity
It absorbs vibrations well.
What is the elastic limit of cast iron close to?
Answer: (A) Its ultimate breaking strength
Cast iron fails with little plastic deformation.