Engineering, Management, Agriculture and Veterinary MCQs are now live. FPSC, PPSC, EPE, IELTS & GRE coming soon.

Measurements & Instrumentation: Measurement Fundamentals

Electrical Engineering · Measurements & Instrumentation

29 questions, each with the answer and a worked solution.

Practice interactively and track your score →
Question 1

What is the accuracy of a measuring instrument?

  1. The range of the instrument
  2. The smallest change it can detect
  3. The closeness of repeated readings to each other
  4. The closeness of a measured value to the true value
Show answer & solution

Answer: (D) The closeness of a measured value to the true value

Accuracy depends on systematic and random errors.

Question 2

What is precision of a measuring instrument?

  1. The cost of the instrument
  2. The closeness of repeated measurements to each other
  3. The full-scale range
  4. The closeness to the true value
Show answer & solution

Answer: (B) The closeness of repeated measurements to each other

A precise instrument may still be inaccurate if it has a bias.

Question 3

Which characteristic represents the smallest input change that an instrument can detect?

  1. Linearity
  2. Repeatability
  3. Resolution
  4. Hysteresis
Show answer & solution

Answer: (C) Resolution

Digital meters show resolution as the value of the last digit.

Question 4

What is the sensitivity of an instrument?

  1. The ratio of change in output to change in input
  2. The resolution only
  3. The maximum reading
  4. The error in the reading
Show answer & solution

Answer: (A) The ratio of change in output to change in input

High sensitivity gives a large response to small input changes.

Question 5

Which statistical quantity indicates how widely repeated measurements are spread?

  1. Arithmetic mean
  2. Measured value
  3. Standard deviation
  4. Correction factor
Show answer & solution

Answer: (C) Standard deviation

Smaller standard deviation means better precision.

Question 6

What is linearity of an instrument?

  1. The smallest detectable change
  2. How closely its output follows a straight-line relationship with input
  3. The repeatability of readings
  4. The drift with time
Show answer & solution

Answer: (B) How closely its output follows a straight-line relationship with input

Non-linearity is expressed as a percentage of full scale.

Question 7

What is hysteresis in an instrument?

  1. A difference in output for the same input depending on whether the input is increasing or decreasing
  2. An increase in sensitivity
  3. A calibration error only
  4. A random error
Show answer & solution

Answer: (A) A difference in output for the same input depending on whether the input is increasing or decreasing

Friction and magnetic effects cause hysteresis.

Question 8

What is repeatability of an instrument?

  1. Its accuracy
  2. Its cost
  3. Its range
  4. Its ability to give the same output for repeated applications of the same input under the same conditions
Show answer & solution

Answer: (D) Its ability to give the same output for repeated applications of the same input under the same conditions

Reproducibility refers to changed conditions.

Question 9

Which type of error is caused by human mistakes such as misreading a scale?

  1. Systematic error
  2. Gross error
  3. Environmental error only
  4. Random error
Show answer & solution

Answer: (B) Gross error

Careful procedures and repeated readings reduce gross errors.

Question 10

Which errors are consistent and can be corrected by calibration?

  1. Systematic errors
  2. Errors that cannot be corrected
  3. Random errors
  4. Gross errors only
Show answer & solution

Answer: (A) Systematic errors

Instrumental, environmental and observational biases are systematic.

Question 11

What are random errors in measurement?

  1. Errors due to misreading only
  2. Errors due to wrong calibration
  3. Unpredictable variations that remain after systematic errors are removed
  4. Errors that are always the same
Show answer & solution

Answer: (C) Unpredictable variations that remain after systematic errors are removed

They are treated statistically.

Question 12

What is the percentage error when a voltmeter reads 98 V for a true value of 100 V?

  1. 0.98%
  2. 2%
  3. 20%
  4. 98%
Show answer & solution

Answer: (B) 2%

Error = (98 − 100)/100 × 100 = −2%.

Question 13

What is the loading effect of a voltmeter?

  1. The calibration of the meter
  2. The heating of the meter
  3. The weight of the meter
  4. The change in circuit voltage caused by the current drawn by the voltmeter
Show answer & solution

Answer: (D) The change in circuit voltage caused by the current drawn by the voltmeter

A voltmeter should have very high resistance to minimise loading.

Question 14

What is calibration of an instrument?

  1. Painting the scale
  2. Replacing its battery
  3. Increasing its range
  4. Comparing its readings with a standard and adjusting or recording corrections
Show answer & solution

Answer: (D) Comparing its readings with a standard and adjusting or recording corrections

Regular calibration keeps instruments accurate.

Question 15

How is the limiting error of a product or quotient of measured quantities found?

  1. By multiplying the errors
  2. By taking the smallest error
  3. By adding the percentage limiting errors of the individual quantities
  4. By subtracting the errors
Show answer & solution

Answer: (C) By adding the percentage limiting errors of the individual quantities

For example, P = VI has error %V + %I.

Question 16

What is the limiting error in power calculated from voltage measured to ±1% and current to ±2%?

  1. ±3%
  2. ±1%
  3. ±2%
  4. ±0.5%
Show answer & solution

Answer: (A) ±3%

Percentage errors add for products.

Question 17

What is a primary standard?

  1. A workshop instrument
  2. A low-cost meter
  3. A digital display
  4. A standard of the highest accuracy, maintained by national laboratories
Show answer & solution

Answer: (D) A standard of the highest accuracy, maintained by national laboratories

Secondary and working standards are calibrated against primary standards.

Question 18

What is drift in an instrument?

  1. A misreading
  2. A gradual change in reading with time while the input is constant
  3. A sudden error
  4. A calibration certificate
Show answer & solution

Answer: (B) A gradual change in reading with time while the input is constant

Temperature and ageing cause drift.

Question 19

What is dead zone of an instrument?

  1. The largest range of input values for which there is no output response
  2. The full-scale range
  3. The maximum error
  4. The time constant
Show answer & solution

Answer: (A) The largest range of input values for which there is no output response

Friction and backlash cause dead zones.

Question 20

What is the probable error of a set of measurements?

  1. The range of readings
  2. Twice the standard deviation
  3. 0.6745 times the standard deviation
  4. The mean value
Show answer & solution

Answer: (C) 0.6745 times the standard deviation

Half the readings lie within ± probable error of the mean.

Question 21

What is the difference between static and dynamic characteristics of an instrument?

  1. Dynamic characteristics apply only to DC
  2. They are identical
  3. Static characteristics apply to steady inputs; dynamic ones describe response to changing inputs
  4. Static characteristics apply only to AC
Show answer & solution

Answer: (C) Static characteristics apply to steady inputs; dynamic ones describe response to changing inputs

Dynamic characteristics include speed of response and fidelity.

Question 22

What does "range" of an instrument mean?

  1. The limits between which it can measure
  2. Its resolution
  3. Its weight
  4. Its accuracy
Show answer & solution

Answer: (A) The limits between which it can measure

Span is the difference between the upper and lower limits.

Question 23

Why should the reading of an analogue instrument preferably be taken in the upper part of the scale?

  1. The pointer moves faster
  2. The percentage error relative to the reading is smaller there
  3. The scale is brighter
  4. The meter uses less power
Show answer & solution

Answer: (B) The percentage error relative to the reading is smaller there

Accuracy is usually stated as a percentage of full scale.

Question 24

What is the arithmetic mean of readings 10.2, 10.4 and 10.6 V?

  1. 10.2 V
  2. 10.4 V
  3. 10.6 V
  4. 31.2 V
Show answer & solution

Answer: (B) 10.4 V

Mean = 31.2/3 = 10.4 V.

Question 25

What is parallax error?

  1. A temperature error
  2. An electrical noise error
  3. A calibration error
  4. An error caused by viewing a pointer and scale from an angle
Show answer & solution

Answer: (D) An error caused by viewing a pointer and scale from an angle

Mirror scales help avoid parallax.

Question 26

Which is the SI base unit of electric current?

  1. Ampere
  2. Volt
  3. Ohm
  4. Watt
Show answer & solution

Answer: (A) Ampere

The volt, ohm and watt are derived units.

Question 27

What is the relative error when a 0–100 V meter with ±1% full-scale accuracy reads 20 V?

  1. ±1%
  2. ±0.2%
  3. ±20%
  4. ±5%
Show answer & solution

Answer: (D) ±5%

±1 V error at 20 V is ±5% of the reading.

Question 28

What is the main purpose of traceability in measurement?

  1. Tracking instrument location
  2. Recording meter ownership
  3. Increasing resolution
  4. Linking measurements to national or international standards through an unbroken chain of calibrations
Show answer & solution

Answer: (D) Linking measurements to national or international standards through an unbroken chain of calibrations

Calibration certificates document traceability.

Question 29

What is meant by the response time of an instrument?

  1. The time of calibration
  2. The time taken to respond to a step change in input
  3. The warm-up time only
  4. The service life
Show answer & solution

Answer: (B) The time taken to respond to a step change in input

Fast response is needed for dynamic measurements.

Practice these 29 questions interactively →