Which type of analogue instrument measures only DC and has a uniform scale?
Show answer & solution
Answer: (C) Permanent magnet moving coil (PMMC)
PMMC instruments are very accurate for DC.
Electrical Engineering · Measurements & Instrumentation
30 questions, each with the answer and a worked solution.
Practice interactively and track your score →Which type of analogue instrument measures only DC and has a uniform scale?
Answer: (C) Permanent magnet moving coil (PMMC)
PMMC instruments are very accurate for DC.
Which analogue instrument can measure both AC and DC but has a non-uniform scale?
Answer: (D) Moving iron instrument
Deflection is proportional to the square of current.
Which three torques are needed in an indicating instrument?
Answer: (C) Deflecting, controlling and damping torques
Each torque has a specific role in pointer movement.
What provides the controlling torque in most analogue instruments?
Answer: (A) Spiral hairsprings
Springs return the pointer to zero.
What type of damping is used in PMMC instruments?
Answer: (D) Eddy current damping from the aluminium former
The moving coil former acts as a short-circuited turn.
How is an ammeter connected in a circuit?
Answer: (B) In series with the load
An ammeter should have very low resistance.
How is a voltmeter connected in a circuit?
Answer: (C) In parallel with the component
A voltmeter should have very high resistance.
What shunt resistance extends a 1 mA, 100 Ω meter to read 1 A?
Answer: (A) About 0.1 Ω
Rsh = (1 × 10⁻³ × 100)/(1 − 0.001) ≈ 0.1 Ω.
What series multiplier converts a 1 mA, 100 Ω meter into a 100 V voltmeter?
Answer: (B) 99.9 kΩ
Rs = 100/0.001 − 100 = 99,900 Ω.
What is the sensitivity of a voltmeter using a 50 µA full-scale movement?
Answer: (B) 20 kΩ per volt
Sensitivity = 1/Ifs = 1/(50 × 10⁻⁶).
Which instrument is used to measure very high DC and AC voltages with almost no current drawn?
Answer: (D) Electrostatic voltmeter
It works on the force between charged plates.
Which instrument is suitable for measuring radio frequency currents?
Answer: (A) Thermocouple instrument
It responds to the heating effect, giving true RMS values.
Why does a rectifier-type AC meter read incorrectly for non-sinusoidal waveforms?
Answer: (C) It responds to average value but is calibrated in RMS for a sine wave using a form factor of 1.11
True RMS meters are needed for distorted waveforms.
Which instrument measures current without breaking the circuit by clamping around a conductor?
Answer: (D) Clamp meter
AC clamp meters use the current transformer principle.
Which instrument is generally used to measure insulation resistance in electrical equipment?
Answer: (C) Megohmmeter (megger)
It applies a high DC test voltage such as 500 V, 1 kV or 5 kV.
What is a ballistic galvanometer used for?
Answer: (A) Measuring electric charge passing in a short time
The first swing is proportional to the charge.
How can a DC clamp meter measure direct current without breaking the circuit?
Answer: (B) By using a Hall effect sensor in the jaws
Current transformers work only with AC.
What is the main disadvantage of moving iron instruments?
Answer: (D) Errors due to hysteresis, frequency and stray fields
They are cheap and robust, used in panels.
Which instrument type is used for precise AC and DC power measurement in laboratories?
Answer: (C) Electrodynamometer wattmeter
It has fixed current coils and a moving pressure coil.
What is the main purpose of a series-type ohmmeter's zero adjustment?
Answer: (A) To compensate for battery voltage changes
The meter is zeroed with the leads shorted.
Why do PMMC instruments need a rectifier to measure AC?
Answer: (B) Their deflection reverses with current direction and averages to zero on AC
The rectifier converts AC to unidirectional current.
What is the deflecting torque in a PMMC instrument proportional to?
Answer: (A) The current through the moving coil
This gives the PMMC its uniform scale.
Why are moving iron instruments widely used on switchboards?
Answer: (C) They are cheap, robust and can read AC and DC
Panel ammeters and voltmeters are often moving iron types.
What is the purpose of a swamping resistor in a PMMC ammeter?
Answer: (B) To reduce errors caused by temperature changes in the copper coil resistance
Manganin has a very low temperature coefficient.
Which material is commonly used for shunts and precision resistors because of its low temperature coefficient?
Answer: (A) Manganin
Constantan is also used in strain gauges and thermocouples.
What is the main purpose of a damping torque in an indicating instrument?
Answer: (D) To bring the pointer to rest quickly without oscillation
Critical damping is ideal in practice.
How does an ohmmeter's scale differ from an ammeter's scale?
Answer: (C) It is non-linear and often reversed, with zero at full deflection
Series ohmmeters show infinity at zero current.
What is the purpose of a megger's guard terminal?
Answer: (A) To eliminate surface leakage currents from the insulation reading
It is used when testing cables and bushings.
What is the typical test voltage of a megger used for low-voltage installations?
Answer: (D) 500 V or 1,000 V DC
Higher voltages are used for HV equipment.
Which instrument is used to check continuity of wiring and fuses quickly?
Answer: (B) Continuity tester or multimeter in resistance mode
A low resistance reading shows continuity.