What is a continuous-time signal?
Show answer & solution
Answer: (D) A signal defined for every instant of time
Analog voltages from microphones are continuous-time signals.
Electrical Engineering · Communication & Signals
30 questions, each with the answer and a worked solution.
Practice interactively and track your score →What is a continuous-time signal?
Answer: (D) A signal defined for every instant of time
Analog voltages from microphones are continuous-time signals.
What is a discrete-time signal?
Answer: (B) A signal defined only at discrete instants of time
Samples taken by an ADC form a discrete-time signal.
What is an energy signal?
Answer: (C) A signal with finite total energy and zero average power
Pulses of finite duration are energy signals.
What is a power signal?
Answer: (A) A signal with finite non-zero average power and infinite energy
Periodic signals such as sinusoids are power signals.
What is an even signal?
Answer: (C) A signal that satisfies x(t) = x(−t)
cos(t) is an even signal.
What is an odd signal?
Answer: (B) A signal that satisfies x(t) = −x(−t)
sin(t) is an odd signal.
What completely characterises a linear time-invariant (LTI) system?
Answer: (A) Its impulse response
The output is the convolution of input and impulse response.
What operation gives the output of an LTI system from its input and impulse response?
Answer: (D) Convolution
In the frequency domain, convolution becomes multiplication.
What is a causal system?
Answer: (B) A system whose output depends only on present and past inputs
All real-time physical systems are causal.
Which tool represents a periodic signal as a sum of sinusoids at multiples of its fundamental frequency?
Answer: (A) Fourier series
Non-periodic signals use the Fourier transform.
Which operation converts a continuous-time non-periodic signal into its frequency spectrum?
Answer: (C) Fourier transform
The spectrum shows how energy is distributed over frequency.
What does the sampling theorem state?
Answer: (D) A band-limited signal can be reconstructed exactly if sampled at least twice its highest frequency
The minimum rate is the Nyquist rate.
What is the Nyquist sampling rate for a signal band-limited to 4 kHz?
Answer: (C) 8 kHz
Nyquist rate = 2 × 4 kHz.
What is aliasing?
Answer: (B) Distortion in which high-frequency components appear as lower frequencies due to undersampling
Anti-aliasing filters remove components above half the sampling rate.
Which parameter represents the range of frequencies occupied by a communication signal?
Answer: (D) Signal bandwidth
Bandwidth is measured in hertz.
What is the frequency of the signal x(t) = sin(100πt)?
Answer: (A) 50 Hz
ω = 100π = 2πf, so f = 50 Hz.
What is the period of the signal x(t) = cos(200πt)?
Answer: (B) 10 ms
f = 100 Hz, so T = 0.01 s.
What is the unit impulse function?
Answer: (D) A function of zero width and unit area at t = 0
It is also called the Dirac delta function.
What is the relationship between the unit step and unit impulse functions?
Answer: (A) The impulse is the derivative of the step
Equivalently, the step is the integral of the impulse.
What is the effect of time shifting a signal on its Fourier transform magnitude?
Answer: (C) The magnitude is unchanged; only the phase changes
A delay adds linear phase.
What does linear phase in a system mean?
Answer: (A) All frequency components are delayed by the same time, avoiding phase distortion
FIR filters can have exactly linear phase.
What is a BIBO stable system?
Answer: (D) A system whose output is bounded for every bounded input
For LTI systems, the impulse response must be absolutely integrable.
What is cross-correlation of two signals used for?
Answer: (C) Measuring similarity between them as a function of time shift
It is used in radar and synchronisation.
What is the spectrum of a periodic square wave made of?
Answer: (B) The fundamental and odd harmonics
Harmonic amplitudes fall as 1/n.
What is the Laplace transform mainly used for in signals and systems?
Answer: (A) Analysing system stability and transient response using the s-domain
The Fourier transform is the Laplace transform on the jω axis.
What is a deterministic signal?
Answer: (C) A signal whose value can be predicted exactly at any time
Random signals are described statistically.
What is the fundamental frequency of the signal x(t) = sin(2π × 50t) + sin(2π × 150t)?
Answer: (A) 50 Hz
150 Hz is the third harmonic of 50 Hz.
What is a time-invariant system?
Answer: (D) A system whose response to an input does not depend on when the input is applied
A delayed input gives an equally delayed output.
What is a system with memory?
Answer: (D) A system whose output depends on past or future inputs as well as the present input
Capacitors and inductors give systems memory.
What is the Fourier transform of an impulse function?
Answer: (C) A constant over all frequencies
An impulse contains all frequencies equally.