Engineering, Management, Agriculture and Veterinary MCQs are now live. FPSC, PPSC, EPE, IELTS & GRE coming soon.

Irrigation: Hydrology, Groundwater & Flood Control

Civil Engineering · Irrigation

31 questions, each with the answer and a worked solution.

Practice interactively and track your score →
Question 1

Hydrology, as applied to irrigation engineering, is the study of

  1. the chemical quality, treatment and safe disposal of water used for irrigation
  2. the mechanics of fluids at rest and in motion in tanks, pipes and reservoirs
  3. the occurrence, distribution and movement of water on and below the earth's surface
  4. the planning, design and construction of canals, weirs and other structures for water delivery
Show answer & solution

Answer: (C) the occurrence, distribution and movement of water on and below the earth's surface

Hydrology deals with how water occurs, is distributed and moves, which underlies irrigation water-resource planning.

Question 2

The catchment area of a river at a given point is the

  1. area permanently submerged by the pond formed at that point
  2. area that can be commanded by gravity canals taking off at that point
  3. cross-sectional area of the river channel at its flood level
  4. area from which surface runoff drains to the river at that point
Show answer & solution

Answer: (D) area from which surface runoff drains to the river at that point

A catchment (watershed) is the whole land area whose runoff drains to the point of interest.

Question 3

Runoff is best described as the

  1. rainfall intercepted by vegetation and later returned to the air by evaporation
  2. rainfall that infiltrates and is held as soil moisture within the crop root zone for plants
  3. rainfall that percolates to deep groundwater below the root zone of crops
  4. rainfall left after losses that reaches streams as surface or shallow subsurface flow
Show answer & solution

Answer: (D) rainfall left after losses that reaches streams as surface or shallow subsurface flow

Runoff is the rainfall left after infiltration, interception and evaporation losses that reaches the streams.

Question 4

A rain gauge is an instrument used to measure the

  1. depth of rainfall collected at a point
  2. velocity of flow in a river channel
  3. intensity of solar radiation reaching the ground
  4. rate of evaporation from an open water surface
Show answer & solution

Answer: (A) depth of rainfall collected at a point

A rain gauge records the depth of rainfall caught at one location.

Question 5

A reliable average annual rainfall figure for a region is obtained from

  1. one season's readings from the gauge nearest to the main town of the region
  2. long-term records from a network of rain gauges across the region
  3. radar images of a single large storm over the whole region
  4. the highest daily rainfall ever recorded at a single station in the region
Show answer & solution

Answer: (B) long-term records from a network of rain gauges across the region

Average rainfall must come from many years of records over a network of gauges, not from isolated readings.

Question 6

The runoff coefficient of a catchment is the ratio of

  1. rainfall volume to runoff volume
  2. infiltration volume to rainfall volume
  3. evaporation volume to rainfall volume
  4. runoff volume to rainfall volume
Show answer & solution

Answer: (D) runoff volume to rainfall volume

Runoff coefficient = runoff / rainfall, the fraction of rain that becomes runoff.

Question 7

Evapotranspiration is the combined loss of water from a cropped field by

  1. evaporation from reservoirs and seepage from watercourses
  2. surface runoff and interception by the crop canopy
  3. evaporation from the soil surface and transpiration from the plants
  4. seepage through the field bunds and percolation below the root zone
Show answer & solution

Answer: (C) evaporation from the soil surface and transpiration from the plants

Evapotranspiration adds direct soil evaporation to plant transpiration.

Question 8

A hydrograph is a graph showing

  1. rainfall intensity plotted against time at a recording gauge in the catchment
  2. river discharge (or stage) plotted against time
  3. evaporation rate plotted against air temperature during the season
  4. soil moisture content plotted against depth below the ground surface
Show answer & solution

Answer: (B) river discharge (or stage) plotted against time

A hydrograph shows how river discharge or water level varies with time.

Question 9

The unit hydrograph of a catchment is the direct runoff hydrograph produced by

  1. a flood whose peak discharge is exactly one cumec at the outlet of the basin
  2. 1 cm of total rainfall of any duration falling on only part of the catchment
  3. a base-flow recession that occurs when no rain falls on the catchment area
  4. 1 cm of effective rainfall of given duration uniformly over the catchment
Show answer & solution

Answer: (D) 1 cm of effective rainfall of given duration uniformly over the catchment

The unit hydrograph is defined for a unit depth of effective rainfall of fixed duration, uniformly distributed.

Question 10

Isohyets are lines on a map joining points of equal

  1. evaporation rate
  2. rainfall depth
  3. runoff coefficient
  4. ground elevation
Show answer & solution

Answer: (B) rainfall depth

Isohyets are contour-like lines of equal rainfall depth.

Question 11

The Thiessen polygon method is used to find the

  1. area of a catchment from contour maps by using a planimeter on the map sheet
  2. infiltration capacity of soil from field double-ring infiltrometer readings
  3. peak flood discharge of a stream from the rational formula and intensity
  4. weighted average rainfall over a catchment, using each gauge's area
Show answer & solution

Answer: (D) weighted average rainfall over a catchment, using each gauge's area

Each gauge's rainfall is weighted by the area of its polygon to give the catchment average.

Question 12

The base flow of a river is the part of its flow sustained mainly by

  1. direct surface runoff soon after rainfall over the catchment
  2. groundwater seepage into the channel during dry periods
  3. melting of seasonal snow and ice over the whole catchment
  4. water released from upstream storage dams for downstream users
Show answer & solution

Answer: (B) groundwater seepage into the channel during dry periods

Base flow is the slow groundwater contribution that keeps rivers flowing between rain events.

Question 13

Infiltration is the process by which water

  1. is lost to the atmosphere from a wet soil surface
  2. flows over the ground surface towards a stream
  3. enters the soil surface and moves downward into the soil
  4. rises from the water table to the root zone by capillarity
Show answer & solution

Answer: (C) enters the soil surface and moves downward into the soil

Infiltration is entry and downward movement of water through the soil surface.

Question 14

Flood frequency analysis is carried out mainly to

  1. compute the evapotranspiration of crops during the flood season of the river
  2. estimate the probability of floods of different sizes for structure design
  3. predict the exact date of the next flood on a river from past records
  4. measure the instantaneous discharge of a river at a gauging site
Show answer & solution

Answer: (B) estimate the probability of floods of different sizes for structure design

It statistically relates flood magnitude to probability or return period for design purposes.

Question 15

The return period of a flood of a given magnitude is the

  1. exact calendar date on which a flood of that size will next occur
  2. length of time for which the flood water stays on the flooded land area
  3. average interval in which a flood of that size is equalled or exceeded once
  4. time taken by the flood water to recede to the base flow level of the river
Show answer & solution

Answer: (C) average interval in which a flood of that size is equalled or exceeded once

Return period T is a statistical average recurrence interval; the annual exceedance probability is 1/T.

Question 16

The specific yield of an unconfined aquifer material is the

  1. rate of flow through unit area of the material under a unit hydraulic gradient
  2. total volume of voids per unit volume of the material, whether drained or not
  3. volume of water that drains by gravity from unit volume of saturated material
  4. volume of water retained against gravity per unit volume of the saturated material
Show answer & solution

Answer: (C) volume of water that drains by gravity from unit volume of saturated material

Specific yield is the gravity-drainable fraction, equal to porosity minus specific retention.

Question 17

Groundwater for irrigation is extracted mainly through

  1. storage reservoirs and spillways built on tributary streams of rivers
  2. diversion weirs and head regulators built across the main rivers
  3. escapes and cross-regulators provided along the canals of the system
  4. open dug wells and tube wells tapping water stored in aquifers
Show answer & solution

Answer: (D) open dug wells and tube wells tapping water stored in aquifers

Wells and tube wells lift water from underground aquifer formations.

Question 18

In an unconfined aquifer, the

  1. upper surface of the saturated zone is the water table, at atmospheric pressure
  2. saturated zone is sealed from rainfall recharge by an overlying clay layer of the area
  3. water level in a well rises above the top of the aquifer in all the seasons
  4. water is held under pressure between two impermeable layers of clay
Show answer & solution

Answer: (A) upper surface of the saturated zone is the water table, at atmospheric pressure

An unconfined aquifer has a free water table with no confining layer above it.

Question 19

A confined (artesian) aquifer is one in which the water

  1. is recharged by rainfall falling directly over the whole aquifer area
  2. occupies a formation too tight to yield any water to wells
  3. has a free surface at atmospheric pressure open to the soil above it
  4. is held under pressure between impermeable layers, so wells may rise or flow
Show answer & solution

Answer: (D) is held under pressure between impermeable layers, so wells may rise or flow

Confinement between impermeable layers puts the water under pressure, so levels rise in wells.

Question 20

A pumping test on a well is carried out mainly to determine the aquifer's

  1. salinity and chemical composition of the water
  2. transmissivity and storage coefficient
  3. depth to bedrock below the well
  4. annual rainfall recharge over the catchment
Show answer & solution

Answer: (B) transmissivity and storage coefficient

Observing drawdown under controlled pumping gives the aquifer's hydraulic properties.

Question 21

Drawdown in a pumping well is the

  1. total depth of the well measured below the ground surface down to the screen
  2. fall in water level in the well due to pumping below the static level
  3. rise in the water level in the well after the pumping has been stopped
  4. height of the water column standing above the pump intake in the well
Show answer & solution

Answer: (B) fall in water level in the well due to pumping below the static level

Drawdown measures how far pumping lowers the water level below its pre-pumping static level.

Question 22

Compared with an open dug well, a tube well is generally

  1. of smaller diameter but much greater depth, reaching deeper aquifers
  2. of larger diameter but shallower depth, tapping only the water table
  3. of the same diameter but lined with masonry throughout
  4. operated only by hand pumps or animal-driven lifts
Show answer & solution

Answer: (A) of smaller diameter but much greater depth, reaching deeper aquifers

Drilled tube wells are narrow and deep, and are normally fitted with motorised pumps.

Question 23

Pumping groundwater persistently faster than it is recharged leads to

  1. a steady rise of the water table and waterlogging in the area around the wells
  2. a progressive fall of the water table, with rising pumping costs and falling yields
  3. increased aquifer storage as the pumped zone widens over the passing years
  4. stronger artesian flow in the nearby confined wells of the area
Show answer & solution

Answer: (B) a progressive fall of the water table, with rising pumping costs and falling yields

Over-extraction mines the aquifer and, in coastal areas, can draw in seawater.

Question 24

Conjunctive use of surface water and groundwater means

  1. transfer of canal water between two different river basins by link canals
  2. planned use of canal water and groundwater together so each source supports the other
  3. sole reliance on tube wells, with the canal outlets closed for the season
  4. sole reliance on canal supplies, with tube wells prohibited in the command area
Show answer & solution

Answer: (B) planned use of canal water and groundwater together so each source supports the other

Conjunctive use coordinates surface and groundwater sources so that each supports the other.

Question 25

An aquifer is a geological formation that is

  1. the unsaturated surface soil zone lying above the water table in the area
  2. porous and permeable enough to store and yield usable water to wells
  3. saturated, but unable to transmit water to wells at any useful rate
  4. dense and impermeable, restraining the movement of groundwater through it
Show answer & solution

Answer: (B) porous and permeable enough to store and yield usable water to wells

An aquifer must store water (porosity) and also transmit it (permeability).

Question 26

Which of the following is a non-structural flood control measure?

  1. floodplain zoning and land-use regulation
  2. construction of a detention reservoir upstream
  3. construction of flood embankments along the river
  4. channel improvement by dredging and straightening
Show answer & solution

Answer: (A) floodplain zoning and land-use regulation

Zoning and forecasting reduce flood damage without physical works; embankments, reservoirs and channel works are structural.

Question 27

A flood detention reservoir works by

  1. passing the flood on unchanged while trapping only its sediment load
  2. holding the whole inflow back to raise the dry-season flow of the river
  3. releasing the stored water suddenly so that the peak travels downstream faster
  4. temporarily storing the flood peak and releasing it gradually downstream
Show answer & solution

Answer: (D) temporarily storing the flood peak and releasing it gradually downstream

Peak attenuation by temporary storage lowers the flood discharge downstream.

Question 28

Flood embankments (levees) protect land mainly by

  1. raising the bed of the river so that floods pass faster through the reach
  2. lowering the flood level by widening the river waterway through the town reach
  3. confining the flood within the channel width so it cannot spread over the land
  4. storing flood volume in the river reach and then releasing it slowly downstream
Show answer & solution

Answer: (C) confining the flood within the channel width so it cannot spread over the land

Embankments contain the flow between banks up to their design flood level.

Question 29

Flood forecasting and warning systems are intended to

  1. give advance notice so people and property can be moved to safety
  2. increase channel capacity so that floods stay within the river banks
  3. reduce the flood peak by cutting off the meander loops of the river
  4. prevent floods by storing runoff in upstream reservoirs during the monsoon
Show answer & solution

Answer: (A) give advance notice so people and property can be moved to safety

Warnings enable preparedness and evacuation but do not physically prevent a flood.

Question 30

Flood embankments along a river require careful design for

  1. the steepest slopes possible to save land, whatever the soil type may be
  2. a crest at normal river level with no freeboard allowance for flood waves and wind
  3. a fully pervious body so that flood water drains freely through it
  4. slope stability and protection of the riverside slope and toe against scour
Show answer & solution

Answer: (D) slope stability and protection of the riverside slope and toe against scour

Embankments must stay stable and must be protected from erosion by the river.

Question 31

Planning an irrigation storage project requires considering together

  1. silt factor, critical velocity ratio and the width of canal berms
  2. river inflow hydrology, crop water demand and reservoir operation
  3. crop prices, land tax and the cost of installing tube wells
  4. canal lining type, outlet design and arrangements for weed control
Show answer & solution

Answer: (B) river inflow hydrology, crop water demand and reservoir operation

Storage size depends on the inflows available and on the demand to be met, tested by operation studies.

Practice these 31 questions interactively →