What is natural gas mainly composed of?
Show answer & solution
Answer: (D) Methane
Pakistani gases often also contain CO₂ and nitrogen.
Chemical Engineering · Petroleum Refining & Natural Gas
38 questions, each with the answer and a worked solution.
Practice interactively and track your score →What is natural gas mainly composed of?
Answer: (D) Methane
Pakistani gases often also contain CO₂ and nitrogen.
Where was Pakistan's first major gas field discovered in 1952?
Answer: (B) Sui in Balochistan
Sui gas became the generic name for piped gas.
Which Pakistani gas field is known for low-BTU gas with high CO₂ content, used in a dedicated power plant?
Answer: (C) Uch
Uch gas has very high CO₂ and lower heating value.
What is associated gas?
Answer: (D) Gas produced together with crude oil from an oil reservoir
Non-associated gas comes from gas reservoirs.
What is wet gas?
Answer: (C) Natural gas containing significant amounts of condensable heavier hydrocarbons
Natural gas liquids (NGL) are recovered from it.
What are natural gas liquids (NGL)?
Answer: (B) Ethane, propane, butanes and natural gasoline recovered from natural gas
They are separated by cooling and fractionation.
What is condensate in gas production?
Answer: (A) Light liquid hydrocarbons that condense from gas at surface conditions
Gas condensate is processed in refineries.
What is sour gas?
Answer: (D) Natural gas containing hydrogen sulphide
H₂S is toxic and corrosive even at low ppm.
What is the main process for removing H₂S and CO₂ from natural gas?
Answer: (C) Absorption in amine solutions such as MDEA
The rich amine is regenerated by stripping.
Why is natural gas dehydrated before pipeline transport?
Answer: (A) To prevent hydrate formation, corrosion and liquid accumulation
TEG absorption or molecular sieves are used.
What is the typical pipeline water content specification for natural gas?
Answer: (B) About 7 lb per million standard cubic feet (about 110 mg/m³)
Specifications vary by contract.
What is the purpose of a gas hydrate inhibitor such as methanol or MEG?
Answer: (A) Lowering hydrate formation temperature in pipelines
MEG is regenerated and reused.
What is the dew point control of natural gas?
Answer: (C) Removing heavy hydrocarbons and water so that no liquids condense in pipelines
Joule–Thomson valves or refrigeration are used.
What is the purpose of a turbo-expander in gas processing?
Answer: (D) Cooling gas by near-isentropic expansion to recover NGL while producing work
It gives deeper cooling than a JT valve.
What is the heating value of natural gas usually expressed in for sales?
Answer: (B) BTU per standard cubic foot or MJ per cubic metre
Sui gas has a gross heating value of about 950 BTU/scf.
What is the Wobbe index?
Answer: (D) Heating value divided by the square root of specific gravity, indicating gas interchangeability for burners
Gases with the same Wobbe index give similar burner heat input.
Why is an odorant such as mercaptan added to distribution gas?
Answer: (A) To make leaks detectable by smell
Natural gas is odourless.
What is LNG?
Answer: (B) Natural gas cooled to about −162 °C to liquefy it for transport and storage
Liquefaction reduces volume about 600 times.
By about what factor does liquefaction reduce the volume of natural gas?
Answer: (C) About 600
This makes ocean transport economic.
What is regasification?
Answer: (B) Warming LNG back to gas at an import terminal for pipeline delivery
Pakistan imports LNG through floating terminals at Port Qasim.
What is an FSRU?
Answer: (A) A floating storage and regasification unit, a ship that stores and regasifies LNG
Pakistan's LNG terminals at Port Qasim use FSRUs.
What is RLNG?
Answer: (D) Re-gasified LNG supplied into the gas network
It is priced higher than domestic gas.
What is boil-off gas in LNG systems?
Answer: (C) Vapour generated as heat leaks into stored LNG
It is used as fuel or reliquefied.
What is the main difference between LPG and LNG?
Answer: (A) LPG is mainly propane and butane liquefied under moderate pressure; LNG is methane liquefied at very low temperature
LPG is stored in cylinders at ambient temperature.
What is CNG?
Answer: (C) Natural gas compressed to about 200–250 bar for use as vehicle fuel
It was widely used in Pakistani vehicles.
What is line pack in a gas pipeline?
Answer: (D) The quantity of gas stored in the pipeline itself by raising pressure
It helps meet peak demand.
What is the purpose of compressor stations along gas pipelines?
Answer: (B) To boost pressure lost to friction and maintain flow
Gas turbines often drive the compressors.
What is a gas reservoir's recovery mechanism mainly driven by?
Answer: (B) Gas expansion as reservoir pressure declines
Gas recovery factors are often 70–90%.
What is coal bed methane (CBM)?
Answer: (C) Methane adsorbed in coal seams, produced by lowering pressure through dewatering
It is an unconventional gas.
What is shale gas?
Answer: (D) Natural gas trapped in low-permeability shale, produced using horizontal wells and hydraulic fracturing
It transformed US gas supply.
What is the purpose of a slug catcher at a gas processing plant inlet?
Answer: (B) Separating and storing liquid slugs arriving from the pipeline
It protects downstream equipment.
What is the main use of propane refrigeration in gas plants?
Answer: (D) Cooling gas to recover NGL and control dew point
Cascade refrigeration reaches lower temperatures.
What is the purpose of a gas metering station?
Answer: (D) Measuring gas volume and quality for custody transfer
Orifice and ultrasonic meters are common.
What is the standard condition commonly used for gas volume in the industry?
Answer: (C) 60 °F and 14.696 psia (or 15 °C and 101.325 kPa)
Standard cubic feet are based on these.
What does MMSCFD mean?
Answer: (B) Million standard cubic feet per day
Pakistan's gas production is reported in MMSCFD.
What is the purpose of mercury removal beds in LNG and gas plants?
Answer: (B) Protecting aluminium heat exchangers from mercury attack
Sulphur-impregnated carbon or metal sulphide beds are used.
What is the purpose of the CO₂ specification in LNG feed gas (about 50 ppm)?
Answer: (B) Preventing CO₂ from freezing in the cryogenic exchangers
Amine units remove CO₂ before liquefaction.
Which liquefaction process uses a mixed refrigerant precooled by propane?
Answer: (D) The C3MR (propane-precooled mixed refrigerant) process
It is widely used in large LNG trains.