Engineering, Management, Agriculture and Veterinary MCQs are now live. FPSC, PPSC, EPE, IELTS & GRE coming soon.

Petroleum Refining & Natural Gas: Crude Oil and Testing

Chemical Engineering · Petroleum Refining & Natural Gas

35 questions, each with the answer and a worked solution.

Practice interactively and track your score →
Question 1

What is crude oil mainly composed of?

  1. Carbohydrates
  2. Alcohols and water only
  3. Pure methane
  4. A complex mixture of hydrocarbons with small amounts of sulphur, nitrogen, oxygen and metal compounds
Show answer & solution

Answer: (D) A complex mixture of hydrocarbons with small amounts of sulphur, nitrogen, oxygen and metal compounds

Carbon is about 83–87% and hydrogen 11–14% by weight.

Question 2

What are the main hydrocarbon classes in crude oil?

  1. Sugars and starches
  2. Paraffins, naphthenes and aromatics
  3. Proteins and fats
  4. Alcohols, ketones and acids
Show answer & solution

Answer: (B) Paraffins, naphthenes and aromatics

Olefins are mostly formed in cracking.

Question 3

What is a paraffinic crude oil?

  1. A crude rich in aromatics
  2. A crude with no hydrocarbons
  3. A crude rich in straight and branched alkanes, giving waxy residues and good kerosene
  4. A crude rich in asphalt only
Show answer & solution

Answer: (C) A crude rich in straight and branched alkanes, giving waxy residues and good kerosene

Paraffinic crudes have high pour points.

Question 4

What is the API gravity of a crude oil with specific gravity 0.85?

  1. About 10°
  2. About 35°
  3. About 50°
  4. About 85°
Show answer & solution

Answer: (B) About 35°

API = 141.5/0.85 − 131.5 = 34.97.

Question 5

How are crude oils classified by API gravity?

  1. Light above about 31°, medium about 22–31° and heavy below about 22°
  2. All crudes are about 10°
  3. Light below 10°
  4. Heavy above 40°
Show answer & solution

Answer: (A) Light above about 31°, medium about 22–31° and heavy below about 22°

Extra-heavy crudes are below 10°.

Question 6

What is a sour crude?

  1. A crude with high acidity only
  2. A crude containing no sulphur
  3. A crude with high sulphur content, typically above about 0.5% by weight
  4. A crude with low API
Show answer & solution

Answer: (C) A crude with high sulphur content, typically above about 0.5% by weight

Sweet crudes have low sulphur.

Question 7

What does the total acid number (TAN) of crude indicate?

  1. Its API gravity
  2. Its sulphur content
  3. Its water content
  4. Its content of naphthenic and other acids that can cause corrosion
Show answer & solution

Answer: (D) Its content of naphthenic and other acids that can cause corrosion

High-TAN crudes need special metallurgy.

Question 8

What is the UOP (Watson) characterisation factor K?

  1. A factor based on boiling point and specific gravity indicating paraffinicity
  2. The cetane number
  3. The octane number
  4. The API gravity
Show answer & solution

Answer: (A) A factor based on boiling point and specific gravity indicating paraffinicity

K ≈ 12.5 or more for paraffinic and about 10–11 for aromatic oils.

Question 9

What does a true boiling point (TBP) distillation show?

  1. The octane number
  2. The yield of fractions boiling over temperature ranges, obtained with high reflux and many stages
  3. The viscosity only
  4. The sulphur content
Show answer & solution

Answer: (B) The yield of fractions boiling over temperature ranges, obtained with high reflux and many stages

It is the basis for crude assays.

Question 10

What is ASTM D86 distillation?

  1. A crude TBP test
  2. A viscosity test
  3. A simple batch distillation test giving boiling ranges of petroleum products
  4. A vacuum test
Show answer & solution

Answer: (C) A simple batch distillation test giving boiling ranges of petroleum products

It reports initial boiling point, recovery temperatures and end point.

Question 11

What is the pour point of an oil?

  1. The lowest temperature at which the oil still flows under test conditions
  2. The cloud point
  3. The boiling point
  4. The flash point
Show answer & solution

Answer: (A) The lowest temperature at which the oil still flows under test conditions

Waxy oils have high pour points.

Question 12

What is the cloud point of a fuel?

  1. The boiling point
  2. The pour point
  3. The ignition point
  4. The temperature at which wax crystals first appear as a haze on cooling
Show answer & solution

Answer: (D) The temperature at which wax crystals first appear as a haze on cooling

It is important for diesel in cold weather.

Question 13

What does Conradson carbon residue measure?

  1. The tendency of an oil to form coke on heating
  2. Its octane number
  3. Its viscosity
  4. Its sulphur content
Show answer & solution

Answer: (A) The tendency of an oil to form coke on heating

High values mean poor cracking feed.

Question 14

What is Reid vapour pressure (RVP)?

  1. The boiling point
  2. The vapour pressure of gasoline or crude at 37.8 °C (100 °F) by a standard test
  3. The pressure in a storage tank
  4. The flash point
Show answer & solution

Answer: (B) The vapour pressure of gasoline or crude at 37.8 °C (100 °F) by a standard test

It controls evaporation losses and engine performance.

Question 15

Which metals in crude oil poison cracking catalysts?

  1. Sodium and potassium only
  2. Calcium and magnesium
  3. Iron and copper only
  4. Nickel and vanadium
Show answer & solution

Answer: (D) Nickel and vanadium

They concentrate in residues.

Question 16

What are asphaltenes?

  1. Light gases
  2. Waxes
  3. High-molecular-weight polar compounds in heavy crude, insoluble in n-heptane or n-pentane
  4. Aromatic solvents
Show answer & solution

Answer: (C) High-molecular-weight polar compounds in heavy crude, insoluble in n-heptane or n-pentane

They can precipitate and foul equipment.

Question 17

What is a crude oil assay?

  1. A test of tank level
  2. A sales contract
  3. A pipeline map
  4. A detailed analysis of a crude's properties and yields of fractions
Show answer & solution

Answer: (D) A detailed analysis of a crude's properties and yields of fractions

Refiners use assays for crude selection.

Question 18

What does the flash point of a petroleum product indicate?

  1. Its freezing point
  2. The lowest temperature at which its vapour ignites momentarily on applying a flame
  3. Its boiling point
  4. Its octane number
Show answer & solution

Answer: (B) The lowest temperature at which its vapour ignites momentarily on applying a flame

It is important for storage safety.

Question 19

Which test apparatus is used for flash point of fuels such as diesel?

  1. Pensky–Martens closed cup tester
  2. Bomb calorimeter
  3. Orsat apparatus
  4. Saybolt viscometer
Show answer & solution

Answer: (A) Pensky–Martens closed cup tester

Abel apparatus is used for kerosene.

Question 20

Which property is measured by a Saybolt or kinematic viscometer?

  1. Water content
  2. Flash point
  3. Viscosity of oils
  4. Octane number
Show answer & solution

Answer: (C) Viscosity of oils

Kinematic viscosity is reported in mm²/s (cSt).

Question 21

What is the BS&W of crude oil?

  1. The barrels per well
  2. The boiling start and wax
  3. The basic sediment and water content
  4. The bitumen and sulphur weight
Show answer & solution

Answer: (C) The basic sediment and water content

It is deducted in custody transfer.

Question 22

What does the smoke point of kerosene and jet fuel indicate?

  1. Its burning quality; higher smoke point means less soot
  2. Its freezing point
  3. Its viscosity
  4. Its flash point
Show answer & solution

Answer: (A) Its burning quality; higher smoke point means less soot

Aromatics lower the smoke point.

Question 23

What is the aniline point of an oil?

  1. The boiling point of aniline
  2. The lowest temperature at which equal volumes of aniline and oil are completely miscible
  3. The flash point
  4. The cloud point
Show answer & solution

Answer: (B) The lowest temperature at which equal volumes of aniline and oil are completely miscible

High aniline point indicates paraffinic oil; it is used to estimate diesel index.

Question 24

What is a barrel of oil equal to?

  1. About 100 litres
  2. About 159 litres (42 US gallons)
  3. About 200 litres exactly
  4. About 1,000 litres
Show answer & solution

Answer: (B) About 159 litres (42 US gallons)

Refinery capacity is often given in barrels per day.

Question 25

What is the ratio of hydrogen to carbon generally like for heavy crudes compared with light crudes?

  1. Zero
  2. Higher
  3. Equal
  4. Lower
Show answer & solution

Answer: (D) Lower

Upgrading adds hydrogen or removes carbon.

Question 26

What is the specific gravity of a crude with API gravity of 10?

  1. 0.75
  2. 0.85
  3. 1.0
  4. 1.2
Show answer & solution

Answer: (C) 1.0

10° API equals the density of water.

Question 27

What is wax content of crude oil important for?

  1. Pumping and storage, since wax raises pour point and can deposit in pipelines
  2. Gas processing only
  3. Sulphur removal
  4. Octane number
Show answer & solution

Answer: (A) Pumping and storage, since wax raises pour point and can deposit in pipelines

Heated pipelines or pour point depressants are used.

Question 28

What is the salt content of crude usually expressed in?

  1. API degrees
  2. ppm of sulphur
  3. Percent by volume
  4. Pounds of NaCl per thousand barrels (PTB)
Show answer & solution

Answer: (D) Pounds of NaCl per thousand barrels (PTB)

Desalted crude typically contains below about 1–3 PTB.

Question 29

What is the Reid vapour pressure of crude important for?

  1. Its viscosity
  2. Its octane number
  3. Its colour
  4. Determining storage losses and safe handling during transport
Show answer & solution

Answer: (D) Determining storage losses and safe handling during transport

Crude stabilisation lowers RVP.

Question 30

Why are crude oils from different fields blended before refining?

  1. To obtain a consistent feed quality matching refinery design
  2. To avoid desalting
  3. To make it heavier
  4. To increase sulphur
Show answer & solution

Answer: (A) To obtain a consistent feed quality matching refinery design

Blends improve yields and margins.

Question 31

What is the API gravity of water?

  1. 0°
  2. 10°
  3. 100°
  4. 141.5°
Show answer & solution

Answer: (B) 10°

API = 141.5/1 − 131.5.

Question 32

What is the relationship between API gravity and density?

  1. Higher API means higher density
  2. They are unrelated
  3. Higher API gravity means lower density
  4. They are equal
Show answer & solution

Answer: (C) Higher API gravity means lower density

API is an inverse scale.

Question 33

Which fraction of crude contains most of its sulphur and metals?

  1. The heaviest residue fractions
  2. The gas fraction
  3. The light naphtha
  4. The LPG fraction
Show answer & solution

Answer: (A) The heaviest residue fractions

Heteroatoms concentrate in heavy fractions.

Question 34

What is the ASTM D1160 test used for?

  1. Flash point testing
  2. Sulphur testing
  3. Distillation of heavy petroleum products under vacuum
  4. Octane testing
Show answer & solution

Answer: (C) Distillation of heavy petroleum products under vacuum

It avoids cracking of heavy samples.

Question 35

What is the purpose of crude oil stabilisation at oil fields?

  1. Adding water
  2. Increasing sulphur
  3. Removing salt only
  4. Removing dissolved light gases to lower vapour pressure for safe storage and transport
Show answer & solution

Answer: (D) Removing dissolved light gases to lower vapour pressure for safe storage and transport

Stabilisers are small distillation columns.

Practice these 35 questions interactively →