What is the most widely used material of construction in chemical plants for non-corrosive service?
Show answer & solution
Answer: (B) Carbon steel
It is cheap, strong and easily fabricated.
Chemical Engineering · Process Equipment & Plant Design
43 questions, each with the answer and a worked solution.
Practice interactively and track your score →What is the most widely used material of construction in chemical plants for non-corrosive service?
Answer: (B) Carbon steel
It is cheap, strong and easily fabricated.
What makes stainless steel corrosion resistant?
Answer: (B) A thin, self-healing chromium oxide passive film
At least about 10.5% chromium is needed.
What is the difference between type 304 and type 316 stainless steel?
Answer: (C) 316 contains molybdenum, giving better resistance to chloride pitting
Both are austenitic stainless steels.
Why are low-carbon grades such as 304L and 316L used for welded equipment?
Answer: (A) They resist sensitisation and intergranular corrosion after welding
Low carbon limits chromium carbide formation at grain boundaries.
What is sensitisation of austenitic stainless steel?
Answer: (D) Chromium carbide precipitation at grain boundaries when heated in about 425–850 °C, depleting chromium nearby
It leads to intergranular corrosion.
What is chloride stress corrosion cracking?
Answer: (D) Cracking of austenitic stainless steels under tensile stress in hot chloride environments
Duplex steels and high-nickel alloys resist it better.
What is pitting corrosion?
Answer: (C) Localised attack forming small deep cavities, often caused by chlorides on passive metals
It is dangerous because little metal loss can cause leaks.
What is crevice corrosion?
Answer: (B) Localised corrosion in narrow gaps such as under gaskets or deposits
Oxygen depletion in the crevice drives it.
What is galvanic corrosion?
Answer: (A) Accelerated corrosion of the less noble metal when two dissimilar metals are in electrical contact in an electrolyte
A large cathode and small anode area is most severe.
Which metal corrodes when zinc and steel are coupled in seawater?
Answer: (D) Zinc
Zinc is anodic to steel; this is the basis of galvanising.
What is cathodic protection?
Answer: (B) Protecting a metal by making it the cathode, using sacrificial anodes or impressed current
It is widely used on buried pipelines and tank bottoms.
Which metals are used as sacrificial anodes?
Answer: (C) Zinc, magnesium and aluminium alloys
They are more active than steel.
What is erosion–corrosion?
Answer: (A) Accelerated attack due to combined fluid velocity and corrosion, removing protective films
It occurs at elbows, pump impellers and valve trims.
What is hydrogen embrittlement?
Answer: (C) Loss of ductility of steel caused by absorbed atomic hydrogen
It can cause sudden cracking of high-strength steels.
Which standard specifies materials for resisting sulphide stress cracking in sour (H₂S) oil and gas service?
Answer: (B) NACE MR0175 / ISO 15156
It limits hardness of steels and welds.
What is high-temperature hydrogen attack?
Answer: (A) Reaction of hydrogen with carbon in steel at high temperature and pressure, forming methane and fissures
Nelson curves (API 941) guide steel selection.
What is caustic embrittlement?
Answer: (D) Stress corrosion cracking of carbon steel in hot concentrated alkaline solutions
It was historically seen in riveted boilers.
What is creep?
Answer: (B) Slow, time-dependent plastic deformation of a material under stress at high temperature
Furnace tubes are designed for creep life.
What is fatigue failure?
Answer: (A) Failure under repeated cyclic stresses below the static strength
Vibrating piping often fails by fatigue.
What is the ductile-to-brittle transition temperature?
Answer: (D) The temperature below which a steel loses toughness and may fracture in a brittle manner
Low-temperature service needs fine-grain or nickel steels.
Which material is commonly used for handling concentrated sulphuric acid (above about 93%) at ambient temperature?
Answer: (C) Carbon steel
A protective iron sulphate film forms; velocity must be limited.
Which material is commonly used for concentrated nitric acid storage?
Answer: (D) Aluminium or stainless steel
Carbon steel is rapidly attacked by dilute nitric acid.
Which metal is preferred for hot concentrated caustic soda service?
Answer: (A) Nickel or high-nickel alloys
Aluminium is rapidly attacked by alkalis.
Which alloy is widely used for hydrofluoric acid service?
Answer: (C) Monel (nickel–copper alloy)
Glass is attacked by HF.
Which metal has excellent resistance to seawater and wet chlorine?
Answer: (B) Titanium
It is used in condenser tubes and chlorine plants.
Why is glass-lined steel used in pharmaceutical reactors?
Answer: (A) It resists most acids and is easy to clean while steel gives strength
It is attacked by HF and hot concentrated alkalis.
What is the main limitation of PTFE linings?
Answer: (C) Limited mechanical strength and temperature of about 200–260 °C
PTFE resists almost all chemicals.
What is fibre-reinforced plastic (FRP) often used for?
Answer: (D) Tanks, ducts and pipes for corrosive chemicals and water at moderate temperatures
It is light and corrosion resistant.
What is a corrosion inhibitor?
Answer: (B) A chemical added in small amounts to reduce the corrosion rate of a metal in a fluid
Filming amines are used in refinery overhead systems.
What is the usual unit of corrosion rate?
Answer: (B) Millimetres per year (or mils per year)
Less than 0.1 mm/year is usually considered good resistance.
What is the corrosion allowance for 20 years of service if corrosion rate is 0.1 mm per year?
Answer: (C) 2 mm
Allowance = rate × design life.
What does a Pourbaix diagram show?
Answer: (D) Regions of immunity, corrosion and passivity of a metal as functions of potential and pH
It is a thermodynamic guide, not a rate predictor.
Which alloy family is used for high-temperature furnace tubes in steam reformers?
Answer: (A) Centrifugally cast high-nickel–chromium alloys such as HP-modified
They resist creep and oxidation near 900–1,000 °C.
What is duplex stainless steel?
Answer: (C) Stainless steel with a mixed austenitic and ferritic structure, offering high strength and chloride resistance
It is used in offshore and seawater systems.
What is microbiologically influenced corrosion (MIC)?
Answer: (A) Corrosion accelerated by bacteria such as sulphate-reducing bacteria
It is common in stagnant water systems and pipelines.
What is the typical maximum service temperature of carbon steel for pressure parts before creep becomes significant?
Answer: (B) About 425 °C
Alloy steels such as Cr–Mo are used above this.
Which alloy steels are used for high-temperature hydrogen service and steam lines?
Answer: (C) Chromium–molybdenum steels such as 1¼Cr–½Mo and 2¼Cr–1Mo
They resist creep and hydrogen attack.
Which materials are used for cryogenic service such as LNG at −162 °C?
Answer: (D) 9% nickel steel, austenitic stainless steel or aluminium alloys
They keep their toughness at very low temperatures.
Why is cast iron unsuitable for pressure parts in hazardous service?
Answer: (D) It is brittle and may fail suddenly
It is still used for some low-pressure water pumps.
What is the main use of copper alloys such as admiralty brass in heat exchangers?
Answer: (C) Condenser and cooler tubes for water service
Copper alloys are attacked by ammonia.
What is dezincification?
Answer: (A) Selective leaching of zinc from brass, leaving porous copper
Inhibited brasses resist it.
What is the principle of corrosion protection by painting?
Answer: (D) Creating a barrier between the metal and the corrosive environment
Zinc-rich primers add sacrificial protection.
Why is hot-dip galvanising applied to structural steel in plants?
Answer: (A) The zinc coating provides barrier and sacrificial protection against atmospheric corrosion
It is widely used for pipe racks and gratings.