Engineering, Management, Agriculture and Veterinary MCQs are now live. FPSC, PPSC, EPE, IELTS & GRE coming soon.

Chemical Reaction Engineering: Non-Ideal Flow and RTD

Chemical Engineering · Chemical Reaction Engineering

34 questions, each with the answer and a worked solution.

Practice interactively and track your score →
Question 1

What is residence time distribution (RTD)?

  1. The distribution of times that fluid elements spend inside a reactor
  2. The time for reaction
  3. The half-life
  4. The space time only
Show answer & solution

Answer: (A) The distribution of times that fluid elements spend inside a reactor

It characterises mixing and flow patterns.

Question 2

What is the E(t) curve?

  1. The rate of reaction
  2. The cumulative distribution
  3. The exit age distribution, such that E(t)dt is the fraction of exit fluid that spent between t and t + dt in the vessel
  4. The concentration of reactant
Show answer & solution

Answer: (C) The exit age distribution, such that E(t)dt is the fraction of exit fluid that spent between t and t + dt in the vessel

The area under E(t) is 1.

Question 3

What is the F(t) curve?

  1. The flow rate
  2. The feed concentration
  3. The cumulative distribution of residence times, the fraction of exit fluid younger than t
  4. The exit age distribution
Show answer & solution

Answer: (C) The cumulative distribution of residence times, the fraction of exit fluid younger than t

F(t) is obtained from a step input.

Question 4

How are E(t) and F(t) related?

  1. F(t) = dE/dt
  2. E(t) = dF/dt
  3. E(t) = 1 − F(t)
  4. E(t) = F(t)
Show answer & solution

Answer: (B) E(t) = dF/dt

F rises from 0 to 1.

Question 5

Which tracer input gives the E curve directly?

  1. A pulse (impulse) input
  2. A sinusoidal input
  3. No input
  4. A step input
Show answer & solution

Answer: (A) A pulse (impulse) input

A step input gives the F curve.

Question 6

What is the E(t) function for an ideal CSTR?

  1. Zero
  2. A spike at t = τ
  3. E(t) = (1/τ) exp(−t/τ)
  4. A constant
Show answer & solution

Answer: (C) E(t) = (1/τ) exp(−t/τ)

Fresh feed can leave immediately.

Question 7

What is the E(t) for an ideal PFR?

  1. A Gaussian with large spread
  2. A Dirac delta (spike) at t = τ
  3. An exponential decay
  4. A constant
Show answer & solution

Answer: (B) A Dirac delta (spike) at t = τ

All elements spend exactly τ in the reactor.

Question 8

What is the mean residence time from an E curve?

  1. The variance
  2. The peak time
  3. The integral of E(t) dt
  4. The integral of t E(t) dt
Show answer & solution

Answer: (D) The integral of t E(t) dt

For a closed vessel it equals V/v.

Question 9

What does the variance of the RTD indicate?

  1. The spread of residence times and degree of dispersion
  2. The mean residence time
  3. The reaction rate
  4. The reactor volume
Show answer & solution

Answer: (A) The spread of residence times and degree of dispersion

Variance is zero for a PFR.

Question 10

What is the tanks-in-series model?

  1. Representing a real reactor as N equal ideal CSTRs in series
  2. A single batch reactor
  3. A packed bed with no flow
  4. A single PFR
Show answer & solution

Answer: (A) Representing a real reactor as N equal ideal CSTRs in series

N = 1 is a CSTR and N → ∞ is a PFR.

Question 11

In the tanks-in-series model, how is N related to the dimensionless variance σθ²?

  1. N = 2σθ²
  2. N = σθ²
  3. N = √σθ²
  4. N = 1/σθ²
Show answer & solution

Answer: (D) N = 1/σθ²

Large N means narrow RTD.

Question 12

What is the dispersion model?

  1. A model of perfect mixing
  2. A plug flow model with superimposed axial dispersion characterised by D/(uL)
  3. A model of bypass only
  4. A model of channelling only
Show answer & solution

Answer: (B) A plug flow model with superimposed axial dispersion characterised by D/(uL)

Small D/uL approaches plug flow.

Question 13

What does a large axial dispersion number D/(uL) indicate?

  1. Batch operation
  2. No flow
  3. Behaviour approaching a CSTR
  4. Behaviour approaching a PFR
Show answer & solution

Answer: (C) Behaviour approaching a CSTR

The Peclet number uL/D is its reciprocal.

Question 14

What causes dead zones in a reactor?

  1. High reaction rate
  2. Perfect mixing
  3. Plug flow
  4. Stagnant regions where fluid exchanges slowly with the main flow
Show answer & solution

Answer: (D) Stagnant regions where fluid exchanges slowly with the main flow

Dead volume reduces effective reactor volume.

Question 15

What does an early sharp peak in the E curve of a packed bed indicate?

  1. Dead zones only
  2. Plug flow
  3. Channelling or bypassing of fluid
  4. Perfect mixing
Show answer & solution

Answer: (C) Channelling or bypassing of fluid

Fluid moves quickly through preferential paths.

Question 16

What is the segregation model?

  1. A perfectly micromixed model
  2. A model in which fluid elements react as separate batch reactors and are mixed only at the exit
  3. A model with no reaction
  4. A model of PFR only
Show answer & solution

Answer: (B) A model in which fluid elements react as separate batch reactors and are mixed only at the exit

Conversion is the RTD-weighted average of batch conversions.

Question 17

For which reaction order does conversion depend only on RTD and not on micromixing?

  1. First order
  2. Second order
  3. Zero order
  4. Half order
Show answer & solution

Answer: (A) First order

For other orders the degree of micromixing matters.

Question 18

What is macromixing?

  1. No mixing
  2. Mixing on the molecular scale
  3. Diffusion in catalyst pores
  4. Mixing described by the RTD on the scale of the vessel
Show answer & solution

Answer: (D) Mixing described by the RTD on the scale of the vessel

Micromixing is mixing at the molecular level.

Question 19

Which tracer properties are desirable for RTD tests?

  1. Volatile and unstable
  2. Highly reactive
  3. Non-reactive, easily detectable and with similar flow properties to the fluid
  4. Strongly adsorbed on walls
Show answer & solution

Answer: (C) Non-reactive, easily detectable and with similar flow properties to the fluid

Dyes, salts and radioactive tracers are used.

Question 20

What does bypassing in a CSTR do to its performance?

  1. It lowers conversion because part of the feed leaves without entering the reaction zone
  2. It makes it behave like a PFR
  3. It increases conversion
  4. It has no effect
Show answer & solution

Answer: (A) It lowers conversion because part of the feed leaves without entering the reaction zone

Combined models use bypass and dead volume.

Question 21

What is the value of F(t) at t = τ for an ideal CSTR?

  1. 0.368
  2. 0.5
  3. About 0.632
  4. 1.0
Show answer & solution

Answer: (C) About 0.632

F(τ) = 1 − e⁻¹.

Question 22

What fraction of fluid leaves an ideal CSTR within half its mean residence time?

  1. About 13%
  2. About 39%
  3. About 50%
  4. About 61%
Show answer & solution

Answer: (B) About 39%

F(0.5τ) = 1 − e^(−0.5) = 0.393.

Question 23

What is the dimensionless variance of the RTD for an ideal CSTR?

  1. 0.5
  2. 0
  3. Infinite
  4. 1
Show answer & solution

Answer: (D) 1

For N tanks in series it is 1/N.

Question 24

What is the dimensionless variance for 4 equal CSTRs in series?

  1. 0.25
  2. 0.5
  3. 1
  4. 4
Show answer & solution

Answer: (A) 0.25

σθ² = 1/N.

Question 25

What is the internal age distribution I(t)?

  1. The reaction rate
  2. The distribution of ages of fluid elements inside the vessel
  3. The cumulative exit distribution
  4. The exit age distribution
Show answer & solution

Answer: (B) The distribution of ages of fluid elements inside the vessel

For a CSTR it equals E(t).

Question 26

How is conversion calculated for a first-order reaction in a real reactor from its RTD?

  1. X = kτ
  2. X = ∫ E(t) dt
  3. X = 1 − exp(−kτ) always
  4. X = 1 − ∫ exp(−kt) E(t) dt
Show answer & solution

Answer: (D) X = 1 − ∫ exp(−kt) E(t) dt

Each element behaves as a small batch reactor.

Question 27

What is the Peclet number in the axial dispersion model?

  1. ρuL/μ
  2. uL/D, the ratio of convective to dispersive transport
  3. D/(uL)
  4. hL/k
Show answer & solution

Answer: (B) uL/D, the ratio of convective to dispersive transport

Large Peclet numbers approach plug flow.

Question 28

What is the main use of RTD studies in industry?

  1. Measuring pressure only
  2. Measuring catalyst activity
  3. Diagnosing flow problems such as dead zones and bypassing and predicting conversion
  4. Measuring reaction heat
Show answer & solution

Answer: (C) Diagnosing flow problems such as dead zones and bypassing and predicting conversion

Radioactive tracers are used in large plants.

Question 29

Which model combines ideal elements to represent a real reactor?

  1. The Arrhenius model
  2. The Thiele model
  3. The Langmuir model
  4. Compartment (combined) models of CSTRs, PFRs, dead volume and bypass
Show answer & solution

Answer: (D) Compartment (combined) models of CSTRs, PFRs, dead volume and bypass

Parameters are fitted to tracer data.

Question 30

What is the effect of micromixing on a second-order reaction in a CSTR compared with the segregated case?

  1. There is no effect
  2. Maximum mixedness gives lower conversion than complete segregation
  3. Conversion becomes zero
  4. It gives higher conversion
Show answer & solution

Answer: (B) Maximum mixedness gives lower conversion than complete segregation

For orders below one the trend reverses.

Question 31

What does a long tail in an E curve indicate?

  1. Slow exchange with stagnant or dead regions
  2. Plug flow
  3. Bypassing only
  4. Perfect mixing
Show answer & solution

Answer: (A) Slow exchange with stagnant or dead regions

Tailing points to poorly mixed zones.

Question 32

What is the mean residence time of a closed vessel with constant density flow?

  1. Half the space time
  2. Twice the space time
  3. Zero
  4. V/v, the space time
Show answer & solution

Answer: (D) V/v, the space time

If the measured mean is less, dead volume exists.

Question 33

What is the value of E(t) at t = 0 for an ideal CSTR with τ = 5 min?

  1. 0
  2. 0.2 min⁻¹
  3. 1 min⁻¹
  4. 5 min⁻¹
Show answer & solution

Answer: (B) 0.2 min⁻¹

E(0) = 1/τ.

Question 34

What is the variance of an RTD for an ideal PFR?

  1. 1
  2. Infinite
  3. Zero
  4. τ
Show answer & solution

Answer: (C) Zero

All elements have the same residence time.

Practice these 34 questions interactively →