What is the integrated rate law for a first-order reaction in a constant-volume batch reactor?
Show answer & solution
Answer: (A) ln(CA0/CA) = kt
A plot of ln CA against t is a straight line.
Chemical Engineering · Chemical Reaction Engineering
33 questions, each with the answer and a worked solution.
Practice interactively and track your score →What is the integrated rate law for a first-order reaction in a constant-volume batch reactor?
Answer: (A) ln(CA0/CA) = kt
A plot of ln CA against t is a straight line.
What is the half-life of a first-order reaction?
Answer: (D) 0.693/k, independent of initial concentration
It is the same at any starting concentration.
What is the half-life of a first-order reaction with k = 0.0693 min⁻¹?
Answer: (C) 10 min
t½ = 0.693/0.0693.
How does the half-life of a second-order reaction (rate = kCA²) depend on initial concentration?
Answer: (B) It is inversely proportional to initial concentration
t½ = 1/(kCA0).
How does the half-life of a zero-order reaction depend on initial concentration?
Answer: (C) It is proportional to initial concentration
t½ = CA0/(2k).
For an nth-order reaction, how does half-life vary with initial concentration?
Answer: (A) In proportion to CA0^(1−n)
This allows order to be found from half-life data.
Which plot gives a straight line for a second-order reaction of a single reactant?
Answer: (D) 1/CA against time
Its slope equals k.
Which plot gives a straight line for a zero-order reaction?
Answer: (B) CA against time
Its slope equals −k.
What is the integral method of analysing kinetic data?
Answer: (D) Guessing a rate law, integrating it and testing the fit to concentration–time data
It works well when the mechanism is simple.
What is the differential method of analysing kinetic data?
Answer: (C) Finding rates from slopes of concentration–time data and fitting them to concentration
A log–log plot of rate against concentration gives the order.
What is the method of initial rates?
Answer: (A) Measuring rates at the start for different initial concentrations to find order
It avoids complications from products and reverse reactions.
What is the method of excess (isolation)?
Answer: (B) Using a large excess of all reactants but one so that the rate depends only on that one
It gives pseudo-order rate laws.
What is a pseudo-first-order reaction?
Answer: (B) A higher-order reaction that behaves as first order because one reactant is in large excess
Hydrolysis of esters in water is an example.
What fraction of reactant remains after three half-lives of a first-order reaction?
Answer: (C) One-eighth
(1/2)³ = 1/8.
How long does it take for 90% conversion in a first-order reaction with k = 0.1 min⁻¹?
Answer: (C) About 23 min
t = ln(10)/0.1 = 23.03 min.
In a first-order reaction, what is the ratio of time for 99% conversion to time for 90% conversion?
Answer: (B) 2
ln 100/ln 10 = 2.
What is the integrated form for a variable-volume batch reactor with first-order kinetics in terms of conversion?
Answer: (A) −ln(1 − XA) = kt, the same as for constant volume
First-order kinetics in conversion are unaffected by volume change.
What is the expansion factor εA?
Answer: (D) The fractional change in volume of the system between no conversion and complete conversion of A
For A → 2R in pure A feed, εA = 1.
What is the expansion factor for the gas reaction A → 3R with feed of 50% A and 50% inerts?
Answer: (B) 1
Volume goes from 2 to 4 units: ε = (4 − 2)/2.
What is the integrated rate law for a reversible first-order reaction A ⇌ R starting with pure A?
Answer: (A) −ln(1 − XA/XAe) = k₁t/XAe
XAe is the equilibrium conversion; the approach to equilibrium is governed by k₁ + k₂.
What is the concentration of A after 20 min in a first-order reaction with CA0 = 2 mol/L and k = 0.0347 min⁻¹?
Answer: (C) About 1 mol/L
kt = 0.693, which is one half-life.
For a second-order reaction with k = 0.5 L/(mol·min) and CA0 = 2 mol/L, what is the half-life?
Answer: (B) 1 min
t½ = 1/(kCA0) = 1/(0.5 × 2).
What is the time for a zero-order reaction with k = 0.1 mol/(L·min) to consume 1 mol/L of reactant?
Answer: (C) 10 min
CA0 − CA = kt.
How is reaction order found from the fractional-life method?
Answer: (D) By plotting log t_F against log CA0, which has slope (1 − n)
t_F is the time to reach a fraction F of the initial concentration.
What does a curved plot of ln CA against time in a batch reactor indicate?
Answer: (A) The reaction is not first order
Other orders should then be tested.
What is the integrated rate law for a second-order reaction A + B → products with CA0 ≠ CB0?
Answer: (D) ln[(CB CA0)/(CA CB0)] = (CB0 − CA0)kt
With equal initial concentrations it reduces to the single-reactant form.
What is the half-life of a first-order reaction whose rate constant is 0.231 h⁻¹?
Answer: (C) 3 h
t½ = 0.693/0.231.
What is the rate constant of a first-order reaction if 75% conversion takes 20 min?
Answer: (C) About 0.0693 min⁻¹
75% conversion is two half-lives, so t½ = 10 min.
How can the rate constant at a new temperature be calculated from two-temperature data?
Answer: (A) Using ln(k₂/k₁) = (E/R)(1/T₁ − 1/T₂)
This is the two-point Arrhenius form.
What is the activation energy if a rate constant doubles from 300 K to 310 K?
Answer: (C) About 53.6 kJ/mol
E = R ln 2/(1/300 − 1/310) = 8.314 × 0.693/1.075 × 10⁻⁴.
What does a constant half-life in successive half-life periods of a batch experiment indicate?
Answer: (B) First-order kinetics
Only first-order reactions have concentration-independent half-lives.
What is the fraction of reactant remaining after time t in a first-order reaction?
Answer: (D) exp(−kt)
For second order it is 1/(1 + kCA0t).
What is the overall order of a reaction with rate = k CA^0.5 CB^1.5?
Answer: (C) 2
Overall order is the sum of exponents.