Which device in a seed drill controls the rate at which seed is delivered?
Show answer & solution
Answer: (D) Seed metering mechanism
The ground wheel drives the metering mechanism.
Agriculture · Agricultural Engineering
36 questions, each with the answer and a worked solution.
Practice interactively and track your score →Which device in a seed drill controls the rate at which seed is delivered?
Answer: (D) Seed metering mechanism
The ground wheel drives the metering mechanism.
Which seed metering mechanism is most common in wheat seed drills?
Answer: (D) Fluted feed roller
The length of the exposed flute controls the seed rate.
Which part of a seed drill opens a narrow furrow for placing the seed?
Answer: (C) Furrow opener
Shoe, tine (hoe) and disc openers are common.
Which type of furrow opener is best for fields with heavy crop residues?
Answer: (B) Disc opener
Discs cut through trash without blocking.
Which part of a seed drill holds the seed before it is metered?
Answer: (D) Seed hopper (box)
Fertilizer has a separate hopper in seed-cum-fertilizer drills.
What is checking that a seed drill delivers the recommended seed rate before sowing called?
Answer: (C) Seed drill calibration
The ground wheel is turned a set number of times and the seed collected is weighed.
Which drill places seed and fertilizer in the soil in one operation?
Answer: (A) Seed-cum-fertilizer drill
Placing fertilizer near the seed improves its efficiency.
How does a planter differ from a seed drill?
Answer: (B) A planter places single seeds at set spacing, while a drill drops seed in a continuous stream
Planters are used for maize, cotton and sunflower.
Which seed metering mechanism, with a rotating plate with cells, is used in maize and cotton planters?
Answer: (A) Inclined or horizontal plate mechanism
Pneumatic (vacuum) planters are used for precision sowing.
Which drill sows wheat directly after rice harvest without seedbed preparation?
Answer: (D) Zero-tillage drill
Its narrow openers cut slits through untilled soil.
Which machine sows wheat directly into heavy rice straw by cutting and moving the straw ahead of the openers?
Answer: (B) Happy Seeder
It helps avoid rice straw burning, which contributes to smog in Punjab.
Which planter makes raised beds and sows crops such as wheat and cotton on them in one pass?
Answer: (A) Bed planter
Bed planting saves irrigation water.
Which machine plants rice seedlings grown in mat-type nurseries in rows?
Answer: (C) Rice transplanter
It reduces the labour of manual transplanting.
Which machine is used to sow rice seed directly in the field without transplanting?
Answer: (B) Direct seeded rice (DSR) drill
DSR saves water and labour.
Which machine plants potato seed tubers in rows?
Answer: (B) Potato planter
Many potato planters also place fertilizer and form ridges.
Which machine spreads granular fertilizer over the field using a spinning disc?
Answer: (D) Centrifugal (spinner) broadcaster
Its spread width depends on disc speed and granule size.
What is a hand-operated or engine-driven machine for applying dry powder pesticides called?
Answer: (A) Duster
Dust drifts easily in wind.
Which sprayer has a long horizontal pipe with many nozzles and is mounted on a tractor?
Answer: (C) Boom sprayer
It covers large fields such as wheat and cotton quickly.
Which sprayer uses a fan to produce a strong air stream that carries fine droplets to tall trees?
Answer: (B) Mist blower (air-blast sprayer)
It is used in mango and citrus orchards.
Which type of nozzle is generally recommended for applying herbicides?
Answer: (C) Flat fan nozzle
Flat fan nozzles give uniform coverage on the soil and weeds.
Which type of nozzle is generally used for applying insecticides and fungicides on crop foliage?
Answer: (B) Hollow cone nozzle
Fine droplets penetrate the canopy and cover leaves well.
What does ULV stand for in pesticide application equipment?
Answer: (A) Ultra-low volume
ULV sprayers apply very small volumes of concentrated spray.
What is the drift of spray droplets to non-target areas mainly caused by?
Answer: (D) Very fine droplets and wind
Spraying in calm conditions reduces drift.
Why should the spray tank be agitated while spraying wettable powders?
Answer: (C) To keep the pesticide uniformly mixed and prevent settling
Most sprayers have mechanical or hydraulic agitators.
Which new technology is being introduced in Pakistan for spraying crops from the air with precision?
Answer: (D) Agricultural spraying drones
Drones cover large areas quickly with less exposure for workers.
Which technologies are central to precision agriculture?
Answer: (D) GPS, GIS, sensors, variable-rate technology and drones
They allow inputs to be matched to the needs of each part of a field.
What is applying different rates of seed or fertilizer to different parts of a field based on maps or sensors called?
Answer: (B) Variable-rate technology (VRT)
It reduces waste and increases efficiency.
Which device on a combine records grain yield across a field for precision farming?
Answer: (C) Yield monitor
Yield maps show high- and low-producing areas.
Which personal protective equipment should be worn when spraying pesticides?
Answer: (B) Gloves, mask, goggles and full-sleeve clothing
Pesticide poisoning is a major hazard for farm workers.
How should a blocked sprayer nozzle be cleaned?
Answer: (C) With water and a soft brush or nozzle cleaner
Blowing by mouth can cause poisoning, and pins damage the orifice.
What is the traditional sowing method in which seed is dropped behind the desi plough through a tube called?
Answer: (A) Pora method
In the kera method, seed is dropped by hand into the plough furrow.
What is the purpose of the press wheel on a seed drill or planter?
Answer: (B) To firm the soil over the seed for good seed–soil contact
Good contact improves germination.
Which mechanism in a sprayer creates the pressure to force liquid through the nozzles?
Answer: (A) Pump
Piston, diaphragm and roller pumps are used.
What is a hand compression sprayer?
Answer: (B) A sprayer whose tank is pumped with air before spraying
It is used in kitchen gardens and small plots.
Why should spraying not be done during strong winds or hot midday hours?
Answer: (A) Drift and evaporation reduce effectiveness and increase hazards
Early morning and evening are best for spraying.
Which machine applies weedicide to weeds only, wiping the chemical on them from above the crop?
Answer: (D) Weed wiper (wick applicator)
It is used when weeds are taller than the crop.