What is the mechanical manipulation of soil to provide good conditions for crop growth called?
Show answer & solution
Answer: (C) Tillage
Tillage controls weeds, mixes residues and prepares the seedbed.
Agriculture · Agricultural Engineering
41 questions, each with the answer and a worked solution.
Practice interactively and track your score →What is the mechanical manipulation of soil to provide good conditions for crop growth called?
Answer: (C) Tillage
Tillage controls weeds, mixes residues and prepares the seedbed.
What are tillage operations after ploughing, done to break clods and prepare a fine seedbed, called?
Answer: (A) Secondary tillage
Harrowing, cultivating and planking are secondary tillage.
What is tillage done between crop rows after sowing to control weeds called?
Answer: (A) Inter-culture (inter-tillage)
Hoes and inter-row cultivators are used.
What is the traditional wooden plough with an iron point, used with bullocks in Pakistan, called?
Answer: (C) Desi plough (hal)
It opens a V-shaped furrow but does not invert the soil.
Which part of a mouldboard plough cuts the furrow slice horizontally?
Answer: (A) Share
The share is the wearing part that penetrates the soil.
Which part of a mouldboard plough lifts, turns and inverts the furrow slice?
Answer: (C) Mouldboard
Its curvature determines how well the soil is turned.
Which part of a mouldboard plough presses against the furrow wall and resists side thrust?
Answer: (B) Landside
It keeps the plough steady and in line.
Which part of the mouldboard plough holds the share, mouldboard and landside together?
Answer: (A) Frog
The frog is the central body to which other parts are fixed.
Which attachment in front of a plough cuts the soil vertically and slices through trash?
Answer: (C) Coulter
Rolling disc coulters are common.
What is the reversible plough, which turns all furrows to one side of the field, mainly used for?
Answer: (A) Ploughing without dead furrows or back furrows
It is useful for irrigated, levelled fields.
Which tillage implement has curved concave steel discs that cut and partly invert the soil?
Answer: (B) Disc plough
Discs roll over obstructions such as roots and stones.
Which implement breaks the hard pan at a depth of about 45–75 cm?
Answer: (A) Subsoiler
Subsoiling improves drainage and root growth in compacted soils.
Which implement has rows of tines and is widely called a "tiller" in Pakistan for seedbed preparation?
Answer: (A) Tine cultivator
Farmers usually give several cultivations before sowing.
Which implement consists of a series of discs on a common axle and is used to cut clods and mix residues?
Answer: (D) Disc harrow
Single-action, tandem and offset disc harrows are used.
Which harrow has its disc gangs arranged one behind the other with an offset from the tractor line?
Answer: (A) Offset disc harrow
It is used in orchards and for heavy residues.
Which light harrow with straight spikes on a frame breaks small clods and levels the soil?
Answer: (C) Spike-tooth harrow
It is also used to cover broadcast seed.
What is the wooden or iron plank dragged over ploughed soil to break clods, level and compact the surface called in Pakistan?
Answer: (B) Sohaga (planker)
Planking also helps conserve soil moisture.
Which implement forms raised ridges and furrows for crops like cotton, potato and sugarcane?
Answer: (C) Ridger
The ridger has two wings that throw soil to both sides.
Which implement is used to make bunds (borders) for dividing fields into irrigation plots?
Answer: (D) Bund former (jandra)
Bunds hold irrigation water within plots.
Which implement is used to break surface crust and compact the seedbed after sowing?
Answer: (B) Roller
Rollers also crush clods.
What is the machine that levels fields using a laser beam called?
Answer: (C) Laser land leveller
A tractor-drawn scraper bucket is guided by the laser.
Which component on a laser land leveller detects the laser beam and signals the scraper to move up or down?
Answer: (B) Laser receiver mounted on the scraper
The control box operates the tractor's hydraulic system automatically.
Within what limit does precision land levelling smooth the field surface?
Answer: (B) Less than about 2 cm variation
Uniform levels allow even irrigation.
Which machine is used for clearing and levelling uneven land and removing large earth masses?
Answer: (D) Bulldozer
Bulldozers are crawler tractors with a front blade.
Which secondary tillage practice in standing water is done for transplanted rice?
Answer: (A) Puddling
Puddling reduces water percolation and controls weeds.
What does the "draft" of an implement mean?
Answer: (C) The horizontal force needed to pull it
Draft depends on soil type, depth and speed.
A tractor pulls an implement with a draft of 10 kN at 3.6 km/h. What is the drawbar power?
Answer: (D) 10 kW
Power (kW) = force (kN) × speed (m/s); 3.6 km/h = 1 m/s.
What is the theoretical field capacity of an implement 2 m wide working at 5 km/h?
Answer: (D) 1 hectare per hour
Theoretical field capacity (ha/h) = width (m) × speed (km/h) / 10.
What is the ratio of effective field capacity to theoretical field capacity called?
Answer: (A) Field efficiency
Time lost in turning and adjustments lowers field efficiency.
Why should ploughing be done across the slope on sloping land?
Answer: (A) To reduce runoff and soil erosion
Up-and-down ploughing creates channels for runoff.
What is the common hand tool with a short handle and flat blade used for weeding and hoeing in Pakistan?
Answer: (D) Khurpa
It is used for weeding vegetables and small plots.
What is the spade-like hand tool used in Pakistan for digging, making bunds and opening watercourse cuts?
Answer: (C) Kassi (kahi)
It is the farmer's main tool for handling irrigation water.
What is the curved hand tool used for harvesting wheat and cutting fodder called?
Answer: (B) Darati (sickle)
Sickle harvesting is slow and labour-intensive.
What is the wooden multi-pronged fork used for handling straw and winnowing threshed grain called?
Answer: (D) Trangli (pitchfork)
Grain falls straight down while chaff is blown away by wind.
Which hand-held tool is used for cutting branches during pruning of fruit trees?
Answer: (A) Secateurs (pruning shears)
Clean cuts heal faster and reduce disease entry.
What is the machine used to chop green fodder for livestock, common on Pakistani farms, called?
Answer: (B) Chaff cutter (toka)
Chopped fodder reduces wastage.
What is the main difference between a mouldboard plough and a chisel plough?
Answer: (B) A chisel plough loosens soil without inverting it
Chisel ploughs leave residues on the surface.
What is the uneven groove left at the junction of two ploughed lands called?
Answer: (C) Dead furrow
A back furrow is a raised ridge where two furrow slices meet.
What is the unploughed strip at each end of a field, used for turning the tractor, called?
Answer: (D) Headland
Headlands are ploughed last.
Which tillage practice reduces the number of operations and leaves residues to conserve soil and moisture?
Answer: (D) Minimum tillage
It also saves fuel and time.
What is the depth of ploughing with a mouldboard plough generally?
Answer: (A) About 15–25 cm
Deeper ploughing needs much more power.