What is the branch of engineering dealing with farm machinery, farm power, irrigation and post-harvest processing called?
Show answer & solution
Answer: (D) Agricultural engineering
It applies engineering principles to agricultural production.
Agriculture · Agricultural Engineering
44 questions, each with the answer and a worked solution.
Practice interactively and track your score →What is the branch of engineering dealing with farm machinery, farm power, irrigation and post-harvest processing called?
Answer: (D) Agricultural engineering
It applies engineering principles to agricultural production.
What is the use of machines in place of human and animal power in farming called?
Answer: (A) Farm mechanization
Mechanization saves time and labour and allows timely operations.
Which are the main sources of farm power?
Answer: (A) Human, animal, mechanical, electrical and renewable power
Tractors and engines are the main mechanical sources.
Approximately how much sustained power can an average adult man produce?
Answer: (D) About 0.1 hp
Human power is costly and limited.
Approximately how much power can a pair of bullocks produce for field work?
Answer: (D) About 1 hp
Bullocks were the main draught power before tractors.
What is one horsepower equal to in watts?
Answer: (D) About 746 W
One metric horsepower is about 735.5 W.
Which type of tractor runs on endless chain tracks instead of wheels?
Answer: (B) Crawler (track-type) tractor
Crawlers give good traction on soft or sloping land.
What is a small two-wheeled tractor operated by a person walking behind it called?
Answer: (C) Power tiller (walking tractor)
It suits small plots, orchards and paddy fields.
Which company manufactures Massey Ferguson tractors in Pakistan?
Answer: (A) Millat Tractors Limited
Millat is based in Lahore.
Which company assembles New Holland tractors in Pakistan?
Answer: (B) Al-Ghazi Tractors Limited
Fiat/New Holland tractors are popular among Pakistani farmers.
Under which Punjab scheme launched in 2024 were tractors provided to farmers on subsidy?
Answer: (D) Green Tractor Scheme
Subsidized tractors were given through balloting.
Which tractor power range is most commonly used on Pakistani farms?
Answer: (B) About 50–85 hp
Medium tractors suit the average farm size.
Which tractor part transmits engine power to operate machines such as threshers and rotavators?
Answer: (C) Power take-off (PTO) shaft
PTO power is used by rotating implements.
What is the standard PTO speed of most tractors?
Answer: (C) 540 rpm
Many tractors also offer 1,000 rpm.
Who invented the three-point linkage hydraulic hitch system for tractors?
Answer: (D) Harry Ferguson
It made mounted implements easy to lift and control.
How many points connect an implement to the tractor in a three-point hitch?
Answer: (B) Two lower links and one top link
The hydraulic system raises and lowers the links.
Which hydraulic control keeps an implement at a fixed height relative to the tractor?
Answer: (A) Position control
It suits sprayers and levelling blades.
Which hydraulic control automatically adjusts implement depth to keep the pulling load constant?
Answer: (B) Draft control
It suits ploughs working in variable soil.
What is an implement pulled by the drawbar and carried on its own wheels called?
Answer: (D) Trailed (pull-type) implement
Trolleys and large disc harrows are often trailed.
What is the power available at the drawbar for pulling implements called?
Answer: (B) Drawbar horsepower
It is lower than engine power because of slip and transmission losses.
What is the correct order of tractor power from highest to lowest?
Answer: (C) Indicated hp, brake hp, PTO hp, drawbar hp
Losses occur at every stage of power transmission.
What is the purpose of the clutch in a tractor?
Answer: (B) To engage and disengage engine power from the transmission
Gears are changed with the clutch disengaged.
What type of clutch is most common in tractors?
Answer: (C) Dry single-plate friction clutch
Many tractors have a dual clutch for the PTO.
What is the function of the gearbox in a tractor?
Answer: (A) To change speed and torque to suit field work
Low gears give high pulling force at low speed.
Which tractor part allows the rear wheels to turn at different speeds while turning?
Answer: (B) Differential
The outer wheel travels farther on a turn.
What is the purpose of a differential lock on a tractor?
Answer: (C) To make both rear wheels turn together when one wheel slips
It should be disengaged before turning.
Why do tractors have independent left and right brakes?
Answer: (A) To help make sharp turns in the field
Both pedals are locked together on roads.
What is adding weight to tractor wheels or the front of the tractor to improve traction called?
Answer: (A) Ballasting
Water in tyres and cast-iron weights are used as ballast.
What is the optimum wheel slip for a tractor during heavy field work?
Answer: (B) About 10–15%
Too much slip wastes power; too little means excess ballast.
What does the tyre marking 13.6-28 on a tractor indicate?
Answer: (A) Section width 13.6 inches and rim diameter 28 inches
Rear tractor tyres are large with deep lugs.
Why are front weights fitted on tractors pulling heavy mounted implements?
Answer: (A) To prevent the front from lifting and keep steering control
Hitching above the rear axle can cause rearward overturning.
Which safety structure protects the tractor operator if the tractor overturns?
Answer: (D) Roll-over protective structure (ROPS)
Seat belts are used along with ROPS.
Why must the PTO shaft always be covered with a guard?
Answer: (D) Rotating shafts can catch clothing and cause serious injury
PTO entanglement is a common farm accident.
What is a tractor with power to all four wheels called?
Answer: (C) Four-wheel-drive (4WD) tractor
4WD gives better traction in wet and heavy soils.
Which device records the working hours of a tractor engine for maintenance?
Answer: (C) Hour meter
Servicing schedules are based on engine hours.
Which Punjab government wing provides bulldozers to farmers on rent for land development?
Answer: (A) Agricultural Engineering (Field Wing)
Bulldozers level and reclaim uneven land.
Which institute in Multan carries out research on farm machinery in Punjab?
Answer: (C) Agricultural Mechanization Research Institute (AMRI)
AMRI develops and tests machines suited to local conditions.
Which institute at NARC Islamabad works on developing farm machinery for Pakistan?
Answer: (D) Agricultural Engineering Institute
It has developed seed drills, threshers and other machines.
What is a tractor trolley mainly used for on Pakistani farms?
Answer: (A) Transporting produce, fodder and inputs
Trolleys are also widely used for rural transport.
What is the main advantage of a power steering system on a tractor?
Answer: (D) It reduces the effort needed to steer
Power steering uses hydraulic pressure.
Why are tractor tyres sometimes partly filled with water?
Answer: (C) To add ballast and improve traction
Calcium chloride solution prevents freezing.
Which tractor system raises and lowers mounted implements using oil under pressure?
Answer: (D) Hydraulic system
The lift arms are connected to the lower links.
What is the term for the force a tractor exerts to pull a load?
Answer: (A) Drawbar pull
Drawbar pull depends on weight, traction and tyre condition.
Which factor most limits the drawbar pull of a two-wheel-drive tractor in loose soil?
Answer: (B) Wheel slip due to poor traction
Ballast and 4WD improve traction.