Engineering, Management, Agriculture and Veterinary MCQs are now live. FPSC, PPSC, EPE, IELTS & GRE coming soon.

Agricultural Engineering: Internal Combustion Engines, Fuel, Cooling, Lubrication & Electrical Systems

Agriculture · Agricultural Engineering

38 questions, each with the answer and a worked solution.

Practice interactively and track your score →
Question 1

What type of engine burns fuel inside the cylinder to produce power?

  1. External combustion engine
  2. Steam engine
  3. Electric motor
  4. Internal combustion engine
Show answer & solution

Answer: (D) Internal combustion engine

Tractor, car and tubewell engines are internal combustion engines.

Question 2

How is fuel ignited in a diesel engine?

  1. By a spark plug
  2. By an electric heater only
  3. By a match
  4. By the heat of highly compressed air
Show answer & solution

Answer: (D) By the heat of highly compressed air

It is therefore called a compression ignition engine.

Question 3

How is fuel ignited in a petrol engine?

  1. By hot exhaust
  2. By compression alone
  3. By a glow plug only
  4. By an electric spark from the spark plug
Show answer & solution

Answer: (D) By an electric spark from the spark plug

It is called a spark ignition engine.

Question 4

Who invented the compression ignition engine?

  1. Nikolaus Otto
  2. Harry Ferguson
  3. Rudolf Diesel
  4. James Watt
Show answer & solution

Answer: (C) Rudolf Diesel

The diesel engine was developed in the 1890s.

Question 5

What is the typical compression ratio of a diesel engine?

  1. About 50:1
  2. About 14:1 to 22:1
  3. About 6:1 to 10:1 only
  4. About 2:1 to 4:1
Show answer & solution

Answer: (B) About 14:1 to 22:1

Petrol engines use lower compression ratios of about 6:1 to 10:1.

Question 6

Why are diesel engines preferred for tractors and tubewells?

  1. They need spark plugs
  2. Higher torque, better fuel economy and durability
  3. They run only on kerosene
  4. They are lighter than all petrol engines
Show answer & solution

Answer: (B) Higher torque, better fuel economy and durability

Diesel engines suit heavy, continuous loads.

Question 7

What is the correct order of strokes in a four-stroke engine?

  1. Exhaust, power, compression, suction
  2. Power, suction, exhaust, compression
  3. Compression, suction, exhaust, power
  4. Suction, compression, power, exhaust
Show answer & solution

Answer: (D) Suction, compression, power, exhaust

Each stroke is one movement of the piston.

Question 8

How many revolutions of the crankshaft complete one cycle of a four-stroke engine?

  1. One revolution
  2. Half a revolution
  3. Four revolutions
  4. Two revolutions
Show answer & solution

Answer: (D) Two revolutions

A two-stroke engine completes its cycle in one revolution.

Question 9

In a four-stroke engine, at what speed does the camshaft rotate compared with the crankshaft?

  1. Half the crankshaft speed
  2. The same speed
  3. Four times the crankshaft speed
  4. Twice the crankshaft speed
Show answer & solution

Answer: (A) Half the crankshaft speed

Each valve opens once every two revolutions.

Question 10

What is the highest position of the piston in the cylinder called?

  1. Stroke
  2. Bore
  3. Top dead centre (TDC)
  4. Bottom dead centre
Show answer & solution

Answer: (C) Top dead centre (TDC)

The lowest position is bottom dead centre (BDC).

Question 11

What is the distance the piston travels between TDC and BDC called?

  1. Bore
  2. Clearance
  3. Displacement
  4. Stroke
Show answer & solution

Answer: (D) Stroke

The bore is the internal diameter of the cylinder.

Question 12

What is the ratio of total cylinder volume to clearance volume called?

  1. Gear ratio
  2. Compression ratio
  3. Air–fuel ratio
  4. Bore–stroke ratio
Show answer & solution

Answer: (B) Compression ratio

Compression ratio = (swept volume + clearance volume) / clearance volume.

Question 13

Which part converts the reciprocating motion of the piston into rotary motion?

  1. Valve
  2. Flywheel
  3. Crankshaft (through the connecting rod)
  4. Camshaft
Show answer & solution

Answer: (C) Crankshaft (through the connecting rod)

The connecting rod links the piston to the crankshaft.

Question 14

What is the function of the flywheel in an engine?

  1. To store energy and smooth the crankshaft rotation
  2. To filter air
  3. To cool the engine
  4. To inject fuel
Show answer & solution

Answer: (A) To store energy and smooth the crankshaft rotation

It carries the engine through the non-power strokes.

Question 15

What is the function of piston rings?

  1. To open valves
  2. To cool the radiator
  3. To seal compression and control oil on cylinder walls
  4. To inject fuel
Show answer & solution

Answer: (C) To seal compression and control oil on cylinder walls

Top rings are compression rings; the lower ring is the oil ring.

Question 16

What is the common firing order of a four-cylinder engine?

  1. 1-2-3-4
  2. 1-3-4-2
  3. 4-3-2-1
  4. 1-4-2-3
Show answer & solution

Answer: (B) 1-3-4-2

The firing order balances forces on the crankshaft.

Question 17

Which device supplies fuel at high pressure to the injectors of a diesel engine?

  1. Fuel injection pump
  2. Water pump
  3. Carburettor
  4. Spark plug
Show answer & solution

Answer: (A) Fuel injection pump

The injector sprays atomized fuel into the cylinder.

Question 18

Which device mixes air and petrol in the correct ratio in older petrol engines?

  1. Injector nozzle
  2. Carburettor
  3. Glow plug
  4. Fuel injection pump
Show answer & solution

Answer: (B) Carburettor

Modern petrol engines use electronic fuel injection.

Question 19

Why must diesel fuel be filtered carefully before reaching the injection pump?

  1. To add water
  2. To make it thicker
  3. The pump and injectors have very fine clearances that dirt can damage
  4. To increase its colour
Show answer & solution

Answer: (C) The pump and injectors have very fine clearances that dirt can damage

Fuel filters and water separators protect the system.

Question 20

What is the device that keeps engine speed nearly constant under changing load called?

  1. Thermostat
  2. Radiator
  3. Governor
  4. Carburettor
Show answer & solution

Answer: (C) Governor

Governors are essential on tractors and tubewell engines.

Question 21

Which property of diesel fuel indicates its ignition quality?

  1. Octane number
  2. Flash point only
  3. Viscosity index
  4. Cetane number
Show answer & solution

Answer: (D) Cetane number

Higher cetane fuel ignites more readily.

Question 22

Which property of petrol indicates its resistance to knocking?

  1. Cetane number
  2. Octane number
  3. Specific gravity
  4. Pour point
Show answer & solution

Answer: (B) Octane number

High-octane petrol resists knocking.

Question 23

Which type of air cleaner is commonly used on tractors working in dusty fields?

  1. Fuel filter
  2. Water filter
  3. No air cleaner
  4. Oil bath or dry paper element air cleaner
Show answer & solution

Answer: (D) Oil bath or dry paper element air cleaner

Dust entering the engine causes rapid wear.

Question 24

What does black smoke from a diesel engine exhaust usually indicate?

  1. Incomplete combustion due to overload, excess fuel or a choked air cleaner
  2. A perfectly tuned engine
  3. Water in the cylinder
  4. Burning of lubricating oil
Show answer & solution

Answer: (A) Incomplete combustion due to overload, excess fuel or a choked air cleaner

Blue smoke indicates burning lubricating oil.

Question 25

What does blue smoke from the exhaust usually indicate?

  1. Lubricating oil burning in the combustion chamber
  2. Normal operation
  3. Excess fuel
  4. Water in fuel
Show answer & solution

Answer: (A) Lubricating oil burning in the combustion chamber

Worn piston rings or valve guides are common causes.

Question 26

What is the main purpose of the cooling system in an engine?

  1. To charge the battery
  2. To heat the fuel
  3. To increase friction
  4. To keep the engine at the right working temperature
Show answer & solution

Answer: (D) To keep the engine at the right working temperature

Overheating can seize the pistons.

Question 27

Which component of a water-cooled engine releases heat from the coolant to the air?

  1. Water pump
  2. Fan belt
  3. Radiator
  4. Thermostat
Show answer & solution

Answer: (C) Radiator

The fan draws air through the radiator.

Question 28

Which device in the cooling system keeps the engine warm by blocking coolant flow to the radiator until it heats up?

  1. Fan
  2. Water pump
  3. Thermostat
  4. Radiator cap
Show answer & solution

Answer: (C) Thermostat

It opens at about 80–85 °C.

Question 29

How are air-cooled engines cooled?

  1. By a water jacket
  2. By fins on the cylinder and a blower or air flow
  3. By a radiator
  4. By oil only
Show answer & solution

Answer: (B) By fins on the cylinder and a blower or air flow

Air-cooled engines are used on small machines.

Question 30

What are the main functions of engine lubricating oil?

  1. Igniting fuel
  2. Storing electrical charge
  3. Increasing friction
  4. Reducing friction, cooling, cleaning and sealing
Show answer & solution

Answer: (D) Reducing friction, cooling, cleaning and sealing

Oil forms a thin film between moving parts.

Question 31

Which system indicates the viscosity grade of engine oil, such as 20W-50?

  1. Cetane rating
  2. SAE grade
  3. Octane rating
  4. API colour code
Show answer & solution

Answer: (B) SAE grade

The "W" number shows winter (cold) performance.

Question 32

Which instrument checks the specific gravity of battery electrolyte to show its state of charge?

  1. Tachometer
  2. Barometer
  3. Hydrometer
  4. Ammeter
Show answer & solution

Answer: (C) Hydrometer

A fully charged lead-acid battery reads about 1.26–1.28.

Question 33

What is the electrolyte of a lead-acid tractor battery?

  1. Dilute sulphuric acid
  2. Salt water
  3. Nitric acid
  4. Hydrochloric acid
Show answer & solution

Answer: (A) Dilute sulphuric acid

Distilled water is added to keep the level correct.

Question 34

Which device in the electrical system charges the battery while the engine runs?

  1. Alternator (or dynamo)
  2. Voltage meter only
  3. Starter motor
  4. Spark plug
Show answer & solution

Answer: (A) Alternator (or dynamo)

The starter motor uses battery power to crank the engine.

Question 35

Which device helps start a cold diesel engine by preheating the combustion chamber?

  1. Spark plug
  2. Carburettor
  3. Glow plug
  4. Distributor
Show answer & solution

Answer: (C) Glow plug

Glow plugs are used in many diesel engines.

Question 36

What is the slow-speed, single-cylinder diesel engine commonly used to run tubewells and threshers in rural Pakistan popularly called?

  1. Peter engine
  2. Wankel engine
  3. Steam engine
  4. Jet engine
Show answer & solution

Answer: (A) Peter engine

It is valued for being simple and durable.

Question 37

What is the swept volume of all cylinders of an engine called?

  1. Compression ratio
  2. Brake power
  3. Clearance volume
  4. Engine displacement (capacity)
Show answer & solution

Answer: (D) Engine displacement (capacity)

It is often expressed in cc or litres.

Question 38

What is the ratio of brake power to indicated power of an engine called?

  1. Field efficiency
  2. Mechanical efficiency
  3. Volumetric efficiency
  4. Thermal efficiency
Show answer & solution

Answer: (B) Mechanical efficiency

Friction losses make brake power lower than indicated power.

Practice these 38 questions interactively →