Engineering, Management, Agriculture and Veterinary MCQs are now live. FPSC, PPSC, EPE, IELTS & GRE coming soon.

Renewable Energy: PV Systems and MPPT

Electrical Engineering · Renewable Energy

27 questions, each with the answer and a worked solution.

Practice interactively and track your score →
Question 1

What is the main purpose of maximum power point tracking in a PV system?

  1. To disconnect every parallel string
  2. To reduce solar irradiance
  3. To increase module temperature
  4. To extract the maximum available power from the PV array
Show answer & solution

Answer: (D) To extract the maximum available power from the PV array

The MPP shifts with irradiance and temperature.

Question 2

Which MPPT algorithm periodically changes the operating voltage and checks whether power increases?

  1. Perturb and observe
  2. Fixed voltage method only
  3. Fuzzy logic only
  4. Incremental conductance only
Show answer & solution

Answer: (A) Perturb and observe

It is simple and widely used.

Question 3

What is an off-grid (stand-alone) PV system?

  1. A system connected to the grid without batteries
  2. A system that supplies loads without connection to the utility grid, usually with batteries
  3. A diesel generator
  4. A hydro plant
Show answer & solution

Answer: (B) A system that supplies loads without connection to the utility grid, usually with batteries

It is common in remote areas.

Question 4

What is a grid-tied PV system?

  1. A system isolated from the grid
  2. A system with no inverter
  3. A system that feeds solar power into the utility grid through an inverter
  4. A system with only batteries
Show answer & solution

Answer: (C) A system that feeds solar power into the utility grid through an inverter

With net metering, surplus energy is exported.

Question 5

What is a hybrid PV system?

  1. A system combining solar with batteries and grid or generator supply
  2. A system with only modules
  3. A system without inverter
  4. A system without loads
Show answer & solution

Answer: (A) A system combining solar with batteries and grid or generator supply

Hybrid inverters manage multiple sources.

Question 6

What is the main advantage of an MPPT charge controller over a PWM controller?

  1. It is always cheaper
  2. It converts excess PV voltage into extra charging current, giving higher energy harvest
  3. It works without a battery
  4. It has no electronics
Show answer & solution

Answer: (B) It converts excess PV voltage into extra charging current, giving higher energy harvest

PWM controllers connect panels almost directly to the battery.

Question 7

What is the function of a blocking diode in a PV system?

  1. To increase voltage
  2. To bypass shaded cells
  3. To convert DC to AC
  4. To prevent reverse current flow from the battery to the panels at night
Show answer & solution

Answer: (D) To prevent reverse current flow from the battery to the panels at night

Modern charge controllers usually provide this function.

Question 8

What is a microinverter?

  1. A central inverter for a plant
  2. A DC–DC converter only
  3. A small inverter attached to each module, converting its DC output to AC individually
  4. A battery charger
Show answer & solution

Answer: (C) A small inverter attached to each module, converting its DC output to AC individually

Microinverters reduce shading and mismatch losses.

Question 9

What is a string inverter?

  1. An inverter connected to one or more series strings of modules
  2. An inverter for each cell
  3. A battery
  4. A DC fuse
Show answer & solution

Answer: (A) An inverter connected to one or more series strings of modules

String inverters are common in rooftop and commercial systems.

Question 10

What is the purpose of a DC combiner box in a PV array?

  1. To store energy
  2. To convert DC to AC
  3. To measure irradiance
  4. To combine the outputs of several strings with fuses and surge protection
Show answer & solution

Answer: (D) To combine the outputs of several strings with fuses and surge protection

It simplifies wiring to the inverter.

Question 11

What PV array size is needed to supply 5 kWh per day at a site with 5 peak sun hours and an overall derating factor of 0.8?

  1. 0.8 kW
  2. 1 kW
  3. 1.25 kW
  4. 5 kW
Show answer & solution

Answer: (C) 1.25 kW

Size = 5/(5 × 0.8) = 1.25 kW.

Question 12

What is the approximate annual energy produced by a 1 kW PV system at a site with 5 peak sun hours, ignoring losses?

  1. About 182 kWh
  2. About 365 kWh
  3. About 1,825 kWh
  4. About 5,000 kWh
Show answer & solution

Answer: (C) About 1,825 kWh

1 × 5 × 365 = 1,825 kWh.

Question 13

What is the total peak power of an array of ten 400 W modules?

  1. 0.4 kW
  2. 4 kW
  3. 40 kW
  4. 400 W
Show answer & solution

Answer: (B) 4 kW

10 × 400 W.

Question 14

What is the performance ratio of a PV plant?

  1. The inverter efficiency only
  2. The ratio of actual energy output to theoretical output based on irradiance and rated power
  3. The efficiency of a single cell
  4. The capacity factor of wind
Show answer & solution

Answer: (B) The ratio of actual energy output to theoretical output based on irradiance and rated power

Typical well-designed systems have PR of about 0.75–0.85.

Question 15

What is the typical capacity factor of solar PV plants in sunny regions?

  1. About 2%
  2. About 15 to 25%
  3. About 60%
  4. About 90%
Show answer & solution

Answer: (B) About 15 to 25%

Solar generates only during daylight and varies with weather.

Question 16

How is solar water pumping commonly controlled in agricultural tube wells in Pakistan?

  1. By a solar pump inverter (VFD) driving the motor at variable speed according to available sunlight
  2. By a DC series motor with no control
  3. By a manual switch only
  4. By a diesel engine only
Show answer & solution

Answer: (A) By a solar pump inverter (VFD) driving the motor at variable speed according to available sunlight

Solar tube wells reduce diesel and grid costs for farmers.

Question 17

Why are surge protective devices installed on the DC side of PV systems?

  1. To reduce current
  2. To increase output
  3. To store energy
  4. To protect modules and inverters from lightning-induced overvoltages
Show answer & solution

Answer: (D) To protect modules and inverters from lightning-induced overvoltages

Large exposed arrays are vulnerable to lightning surges.

Question 18

What happens to the voltage of a PV string if more modules are connected in series?

  1. It increases
  2. It stays the same
  3. It becomes zero
  4. It decreases
Show answer & solution

Answer: (A) It increases

The string voltage must stay within the inverter's input range.

Question 19

What is the main role of the charge controller in an off-grid PV system?

  1. To store energy
  2. To convert DC to AC
  3. To measure wind speed
  4. To regulate battery charging and prevent overcharging and deep discharge
Show answer & solution

Answer: (D) To regulate battery charging and prevent overcharging and deep discharge

It protects battery life.

Question 20

What does the incremental conductance MPPT method compare?

  1. Voltage and frequency
  2. Power and wind speed
  3. Current and temperature
  4. The incremental conductance dI/dV with the instantaneous conductance −I/V
Show answer & solution

Answer: (D) The incremental conductance dI/dV with the instantaneous conductance −I/V

At the MPP, dP/dV = 0.

Question 21

Why must PV arrays and inverters be properly earthed?

  1. To increase power
  2. To reduce voltage
  3. For safety of people and equipment and for correct operation of protection
  4. To store energy
Show answer & solution

Answer: (C) For safety of people and equipment and for correct operation of protection

Earthing also helps with lightning protection.

Question 22

What is an inverter's efficiency in a PV system?

  1. The ratio of AC output power to DC input power
  2. The MPPT speed
  3. The PV module efficiency
  4. The battery capacity
Show answer & solution

Answer: (A) The ratio of AC output power to DC input power

Modern inverters exceed 96–98% efficiency.

Question 23

What is the purpose of the DC disconnect switch in a PV system?

  1. To safely isolate the PV array from the inverter for maintenance
  2. To increase voltage
  3. To measure power
  4. To store energy
Show answer & solution

Answer: (A) To safely isolate the PV array from the inverter for maintenance

DC arcs are hard to extinguish, so DC-rated switches are used.

Question 24

Why should PV string voltage at low temperature be checked during design?

  1. There is no effect
  2. Current doubles
  3. Open-circuit voltage rises in cold weather and must not exceed the inverter maximum
  4. Voltage falls to zero in cold weather
Show answer & solution

Answer: (C) Open-circuit voltage rises in cold weather and must not exceed the inverter maximum

Winter mornings can give the highest Voc.

Question 25

What is the inverter loading (DC/AC) ratio?

  1. The module efficiency
  2. The ratio of PV array DC rating to inverter AC rating
  3. The ratio of voltage to current
  4. The battery size
Show answer & solution

Answer: (B) The ratio of PV array DC rating to inverter AC rating

Ratios of about 1.1–1.3 are common.

Question 26

What causes mismatch losses in a PV array?

  1. Perfectly matched modules
  2. Low temperature only
  3. Clean modules
  4. Differences between module characteristics or partial shading so that modules cannot all operate at their MPP
Show answer & solution

Answer: (D) Differences between module characteristics or partial shading so that modules cannot all operate at their MPP

Optimisers and microinverters reduce mismatch losses.

Question 27

What is a solar home system?

  1. A wind farm
  2. A small off-grid PV kit with panel, battery, charge controller and DC loads for basic household needs
  3. A large solar park
  4. A grid substation
Show answer & solution

Answer: (B) A small off-grid PV kit with panel, battery, charge controller and DC loads for basic household needs

Such systems power lights, fans and phone charging in remote areas.

Practice these 27 questions interactively →