Engineering, Management, Agriculture and Veterinary MCQs are now live. FPSC, PPSC, EPE, IELTS & GRE coming soon.

Renewable Energy: Grid Integration and Policy

Electrical Engineering · Renewable Energy

25 questions, each with the answer and a worked solution.

Practice interactively and track your score →
Question 1

Which Pakistani body promotes and facilitates alternative and renewable energy projects?

  1. PTA
  2. OGRA
  3. PEC
  4. Alternative Energy Development Board (AEDB)
Show answer & solution

Answer: (D) Alternative Energy Development Board (AEDB)

AEDB works under the Ministry of Energy (Power Division).

Question 2

What share of renewable energy (excluding large hydro) in generation does Pakistan's ARE Policy 2019 target by 2030?

  1. 5%
  2. 30%
  3. 80%
  4. 100%
Show answer & solution

Answer: (B) 30%

The policy targets 20% by 2025 and 30% by 2030.

Question 3

What allows consumers with rooftop solar in Pakistan to export surplus electricity to the DISCO grid?

  1. NEPRA net metering regulations
  2. The Mines Act
  3. PECA 2016
  4. The Explosives Act
Show answer & solution

Answer: (A) NEPRA net metering regulations

Consumers are billed for net imported energy.

Question 4

What is the main technical challenge of integrating large amounts of solar and wind into the grid?

  1. Variability and uncertainty of output
  2. Constant output
  3. Lack of sunlight in Pakistan
  4. Too much inertia
Show answer & solution

Answer: (A) Variability and uncertainty of output

Forecasting, storage and flexible plants help manage variability.

Question 5

What is curtailment of renewable energy?

  1. Building new turbines
  2. Increasing renewable output
  3. Cleaning modules
  4. Deliberately reducing renewable output because the grid cannot absorb it
Show answer & solution

Answer: (D) Deliberately reducing renewable output because the grid cannot absorb it

Curtailment wastes potentially useful energy.

Question 6

What is the levelised cost of energy (LCOE)?

  1. The fuel price only
  2. The capacity factor
  3. The average lifetime cost per unit of electricity generated, including capital and operating costs
  4. The tariff charged to consumers
Show answer & solution

Answer: (C) The average lifetime cost per unit of electricity generated, including capital and operating costs

It allows comparison of different technologies.

Question 7

What is a feed-in tariff?

  1. A guaranteed price paid for renewable electricity fed into the grid
  2. A fuel subsidy
  3. A fine for low power factor
  4. A tax on solar panels
Show answer & solution

Answer: (A) A guaranteed price paid for renewable electricity fed into the grid

Many countries are moving to competitive auctions instead.

Question 8

What is the "duck curve" in power systems?

  1. A transformer loss curve
  2. A wind speed curve
  3. A battery charge curve
  4. The shape of net demand that drops in the middle of the day due to solar and ramps up sharply in the evening
Show answer & solution

Answer: (D) The shape of net demand that drops in the middle of the day due to solar and ramps up sharply in the evening

It creates a need for fast ramping resources.

Question 9

Why is renewable energy important for Pakistan's power sector economics?

  1. It needs imported coal
  2. It increases fuel imports
  3. It reduces dependence on imported fossil fuels and foreign exchange spending
  4. It raises emissions
Show answer & solution

Answer: (C) It reduces dependence on imported fossil fuels and foreign exchange spending

Local solar, wind and hydro resources are abundant.

Question 10

What is a hybrid renewable power plant?

  1. A single solar module
  2. A plant combining two or more sources such as solar, wind and storage at one site
  3. A diesel plant only
  4. A nuclear plant
Show answer & solution

Answer: (B) A plant combining two or more sources such as solar, wind and storage at one site

Hybrids give smoother output and share grid connections.

Question 11

Why is accurate solar and wind forecasting important for grid operators?

  1. To set tariffs only
  2. To measure insulation
  3. To design towers
  4. To schedule other generation and reserves to balance variable renewable output
Show answer & solution

Answer: (D) To schedule other generation and reserves to balance variable renewable output

Forecasts reduce reserve costs and curtailment.

Question 12

What grid support function do modern solar inverters provide?

  1. Reactive power and voltage support, and frequency response
  2. Lightning protection only
  3. Only DC output
  4. Battery manufacturing
Show answer & solution

Answer: (A) Reactive power and voltage support, and frequency response

Grid codes increasingly require these functions.

Question 13

What is a power purchase agreement (PPA)?

  1. A safety certificate
  2. A building permit
  3. A long-term contract under which a buyer purchases electricity from a generator at agreed terms
  4. A grid code
Show answer & solution

Answer: (C) A long-term contract under which a buyer purchases electricity from a generator at agreed terms

CPPA-G signs PPAs with generators in Pakistan.

Question 14

What is distributed generation?

  1. Pumped storage only
  2. Small-scale generation located close to loads, such as rooftop solar
  3. Large central power stations only
  4. Transmission lines
Show answer & solution

Answer: (B) Small-scale generation located close to loads, such as rooftop solar

It reduces network losses but changes protection and voltage control needs.

Question 15

What is the main reason for rapid growth of rooftop solar in Pakistan in recent years?

  1. Free grid electricity
  2. Rising module prices
  3. High grid tariffs, frequent load shedding and falling solar module prices
  4. Lack of sunlight
Show answer & solution

Answer: (C) High grid tariffs, frequent load shedding and falling solar module prices

Many homes and businesses have installed solar with batteries or net metering.

Question 16

What is a microgrid?

  1. A local energy system with its own generation and loads that can operate connected to or islanded from the main grid
  2. A transformer
  3. A large national grid
  4. A single solar module
Show answer & solution

Answer: (A) A local energy system with its own generation and loads that can operate connected to or islanded from the main grid

Microgrids improve reliability for remote areas and critical facilities.

Question 17

What is the main purpose of a renewable energy grid code?

  1. To license engineers
  2. To design houses
  3. To set electricity prices
  4. To set technical requirements such as voltage, frequency and fault ride-through for connecting renewable plants
Show answer & solution

Answer: (D) To set technical requirements such as voltage, frequency and fault ride-through for connecting renewable plants

NEPRA's grid code includes requirements for wind and solar plants.

Question 18

Why do high levels of inverter-based generation reduce system inertia?

  1. They increase frequency
  2. Inverters have no rotating mass synchronised to the grid
  3. They have no effect
  4. Inverters add large rotating masses
Show answer & solution

Answer: (B) Inverters have no rotating mass synchronised to the grid

Grid-forming inverters and storage can provide synthetic inertia.

Question 19

What is the capacity value of a variable renewable source?

  1. Its energy output only
  2. Its cost
  3. The amount of firm capacity it can be relied on to contribute during peak demand
  4. Its nameplate rating
Show answer & solution

Answer: (C) The amount of firm capacity it can be relied on to contribute during peak demand

Solar contributes little to late-evening peaks.

Question 20

What are carbon emissions reduced by when coal generation is replaced by solar?

  1. More flaring
  2. Increased fuel use
  3. More transport
  4. Avoided fuel combustion
Show answer & solution

Answer: (D) Avoided fuel combustion

Each kWh of coal power emits roughly 0.9–1 kg of CO₂.

Question 21

What is a competitive bidding (auction) process for renewable projects?

  1. Selecting developers who offer the lowest tariff for a defined capacity
  2. Fixing tariffs without competition
  3. Giving projects away
  4. Banning private investors
Show answer & solution

Answer: (A) Selecting developers who offer the lowest tariff for a defined capacity

Auctions have reduced solar and wind tariffs worldwide.

Question 22

What is energy efficiency?

  1. Producing more emissions
  2. Using less energy to deliver the same service
  3. Wasting energy
  4. Using more energy
Show answer & solution

Answer: (B) Using less energy to deliver the same service

Efficient motors, LED lights and inverter air conditioners save energy.

Question 23

Which lighting technology offers the greatest energy savings over incandescent bulbs?

  1. Halogen lamps
  2. LED lamps
  3. Mercury vapour lamps only
  4. Kerosene lamps
Show answer & solution

Answer: (B) LED lamps

LEDs use about 80–90% less energy than incandescent lamps.

Question 24

What is the main benefit of solar plus storage for rural electrification in Pakistan?

  1. Reliable off-grid supply where extending the grid is costly
  2. Higher diesel use
  3. More grid losses
  4. Lower reliability
Show answer & solution

Answer: (A) Reliable off-grid supply where extending the grid is costly

Solar home systems light many remote homes in Balochistan and Sindh.

Question 25

What is reverse power flow in distribution networks with rooftop solar?

  1. A lightning surge
  2. Current flowing only to loads
  3. A short circuit
  4. Power flowing from consumers back towards the substation when solar exceeds local demand
Show answer & solution

Answer: (D) Power flowing from consumers back towards the substation when solar exceeds local demand

It can cause voltage rise and affect protection settings.

Practice these 25 questions interactively →