Engineering, Management, Agriculture and Veterinary MCQs are now live. FPSC, PPSC, EPE, IELTS & GRE coming soon.

Chemical Engineering Thermodynamics: Property Relations

Chemical Engineering · Chemical Engineering Thermodynamics

33 questions, each with the answer and a worked solution.

Practice interactively and track your score →
Question 1

What is the Helmholtz free energy?

  1. A = U − TS
  2. A = H + TS
  3. A = H − TS
  4. A = U + PV
Show answer & solution

Answer: (A) A = U − TS

At constant T and V, A is minimised at equilibrium.

Question 2

What is the Gibbs free energy?

  1. G = H + TS
  2. G = U − TS
  3. G = H − TS
  4. G = U + PV
Show answer & solution

Answer: (C) G = H − TS

At constant T and P, G is minimised at equilibrium.

Question 3

What is the condition for a spontaneous process at constant temperature and pressure?

  1. ΔG < 0
  2. ΔG = 0
  3. ΔH > 0 always
  4. ΔG > 0
Show answer & solution

Answer: (A) ΔG < 0

ΔG = 0 at equilibrium.

Question 4

What is the fundamental property relation for dG?

  1. dG = −S dT − P dV
  2. dG = T dS + V dP
  3. dG = T dS − P dV
  4. dG = V dP − S dT
Show answer & solution

Answer: (D) dG = V dP − S dT

It is the basis for phase equilibrium.

Question 5

What is the fundamental property relation for dH?

  1. dH = −S dT − P dV
  2. dH = T dS + V dP
  3. dH = T dS − P dV
  4. dH = V dP − S dT
Show answer & solution

Answer: (B) dH = T dS + V dP

dU = T dS − P dV.

Question 6

What are Maxwell's relations derived from?

  1. The first law only
  2. The ideal gas law
  3. Experimental tables
  4. The exactness of the differentials of U, H, A and G
Show answer & solution

Answer: (D) The exactness of the differentials of U, H, A and G

For example (∂S/∂P)T = −(∂V/∂T)P.

Question 7

Which Maxwell relation comes from dA = −S dT − P dV?

  1. (∂S/∂P)T = −(∂V/∂T)P
  2. (∂T/∂V)S = −(∂P/∂S)V
  3. (∂S/∂V)T = (∂P/∂T)V
  4. (∂T/∂P)S = (∂V/∂S)P
Show answer & solution

Answer: (C) (∂S/∂V)T = (∂P/∂T)V

It lets entropy changes be found from PVT data.

Question 8

What is the Gibbs–Helmholtz equation?

  1. [∂(G/T)/∂T]P = −H/T²
  2. dG = V dP
  3. ΔG = −RT ln K only
  4. G = H − TS only
Show answer & solution

Answer: (A) [∂(G/T)/∂T]P = −H/T²

It is used to find temperature effects on equilibrium.

Question 9

What is the Clapeyron equation?

  1. dP/dT = ΔS/ΔH
  2. dP/dT = ΔH/(TΔV) for a phase change
  3. dP/dT = 0
  4. dP/dT = R/V
Show answer & solution

Answer: (B) dP/dT = ΔH/(TΔV) for a phase change

The Clausius–Clapeyron equation is its approximation for vaporisation.

Question 10

Why does ice melt under pressure according to the Clapeyron equation?

  1. Water expands on freezing, so ΔV of melting is negative and melting point falls with pressure
  2. Pressure raises temperature
  3. Pressure has no effect
  4. Ice is denser than water
Show answer & solution

Answer: (A) Water expands on freezing, so ΔV of melting is negative and melting point falls with pressure

Most substances behave the opposite way.

Question 11

What is fugacity?

  1. The vapour pressure
  2. A corrected pressure that plays the role of pressure for real gases in chemical potential expressions
  3. The partial pressure only
  4. The critical pressure
Show answer & solution

Answer: (B) A corrected pressure that plays the role of pressure for real gases in chemical potential expressions

For an ideal gas, fugacity equals pressure.

Question 12

What is the fugacity coefficient?

  1. The ratio of pressure to fugacity
  2. The activity coefficient
  3. The compressibility factor
  4. The ratio of fugacity to pressure
Show answer & solution

Answer: (D) The ratio of fugacity to pressure

It equals 1 for an ideal gas.

Question 13

What is the chemical potential of a species in a mixture?

  1. The total Gibbs energy
  2. The fugacity
  3. The partial molar Gibbs energy of that species
  4. The enthalpy
Show answer & solution

Answer: (C) The partial molar Gibbs energy of that species

At equilibrium, chemical potentials of a species are equal in all phases.

Question 14

What is a partial molar property?

  1. The molar property of a pure component
  2. A property of an ideal gas only
  3. The change in a total property when an infinitesimal amount of one species is added at constant T, P and other amounts
  4. The total property
Show answer & solution

Answer: (C) The change in a total property when an infinitesimal amount of one species is added at constant T, P and other amounts

Partial molar volume is an example.

Question 15

What does the Gibbs–Duhem equation express?

  1. The ideal gas law
  2. Raoult's law
  3. The first law
  4. The partial molar properties of components in a mixture are not independent
Show answer & solution

Answer: (D) The partial molar properties of components in a mixture are not independent

At constant T and P, Σ xi dμi = 0.

Question 16

What is a residual property?

  1. The difference between the real-fluid property and the ideal-gas property at the same T and P
  2. The excess property
  3. The property of pure liquid
  4. The property at 0 K
Show answer & solution

Answer: (A) The difference between the real-fluid property and the ideal-gas property at the same T and P

Equations of state give residual properties.

Question 17

What is an excess property?

  1. The property of pure solvent
  2. The difference between the real-solution property and the ideal-solution property at the same T, P and composition
  3. The residual property of a gas
  4. The critical property
Show answer & solution

Answer: (B) The difference between the real-solution property and the ideal-solution property at the same T, P and composition

Excess Gibbs energy leads to activity coefficients.

Question 18

What is the Peng–Robinson equation?

  1. A vapour pressure equation
  2. A heat transfer correlation
  3. An activity coefficient model
  4. A cubic equation of state widely used for hydrocarbon systems
Show answer & solution

Answer: (D) A cubic equation of state widely used for hydrocarbon systems

SRK is another widely used cubic equation.

Question 19

What is the virial equation of state?

  1. PV = nRT exactly
  2. Z = 1 + B/V + C/V² + …, with coefficients from molecular interactions
  3. A van der Waals equation
  4. P = RT/(V − b) only
Show answer & solution

Answer: (B) Z = 1 + B/V + C/V² + …, with coefficients from molecular interactions

The second virial coefficient B is the most important.

Question 20

What is the acentric factor?

  1. A parameter describing the non-sphericity of molecules, from reduced vapour pressure at Tr = 0.7
  2. The compressibility factor
  3. The critical temperature
  4. The heat capacity ratio
Show answer & solution

Answer: (A) A parameter describing the non-sphericity of molecules, from reduced vapour pressure at Tr = 0.7

Pitzer introduced it.

Question 21

What is the volume expansivity β?

  1. (∂P/∂T) at constant V
  2. (1/V)(∂V/∂P) at constant T
  3. (1/V)(∂V/∂T) at constant P
  4. (∂H/∂T) at constant P
Show answer & solution

Answer: (C) (1/V)(∂V/∂T) at constant P

Isothermal compressibility is −(1/V)(∂V/∂P)T.

Question 22

What is the general relation between Cp and Cv?

  1. Cp + Cv = R
  2. Cp/Cv = R
  3. Cp − Cv = 0
  4. Cp − Cv = TVβ²/κ
Show answer & solution

Answer: (D) Cp − Cv = TVβ²/κ

For an ideal gas it reduces to R.

Question 23

What is the chemical potential of an ideal gas?

  1. μ = H − TS only
  2. μ = μ° + P
  3. μ = μ° + RT ln(P/P°)
  4. μ = RT
Show answer & solution

Answer: (C) μ = μ° + RT ln(P/P°)

For real gases fugacity replaces P.

Question 24

What are the natural variables of internal energy U?

  1. Entropy and pressure
  2. Temperature and volume
  3. Entropy and volume
  4. Temperature and pressure
Show answer & solution

Answer: (C) Entropy and volume

dU = T dS − P dV.

Question 25

What are the natural variables of Gibbs free energy?

  1. Entropy and volume
  2. Temperature and pressure
  3. Temperature and volume
  4. Entropy and pressure
Show answer & solution

Answer: (B) Temperature and pressure

This makes G convenient for process conditions.

Question 26

What does the generalised compressibility chart use as coordinates?

  1. Reduced pressure, with lines of reduced temperature
  2. Volume and entropy
  3. Enthalpy and entropy
  4. Actual pressure and temperature
Show answer & solution

Answer: (A) Reduced pressure, with lines of reduced temperature

It is based on the principle of corresponding states.

Question 27

What is the change in Gibbs energy of an ideal gas compressed isothermally from P₁ to P₂?

  1. nRT ln(P₂/P₁)
  2. nCp(T₂ − T₁)
  3. Zero
  4. nR ln(P₂/P₁)
Show answer & solution

Answer: (A) nRT ln(P₂/P₁)

dG = V dP at constant T.

Question 28

What is the Redlich–Kwong equation?

  1. A heat capacity equation
  2. A two-parameter cubic equation of state
  3. A vapour pressure correlation
  4. An activity coefficient model
Show answer & solution

Answer: (B) A two-parameter cubic equation of state

Soave modified it into the SRK equation.

Question 29

What does the Gibbs energy of a pure substance do at a phase transition at constant T and P?

  1. It becomes infinite
  2. It jumps sharply
  3. It has equal values in both phases
  4. It becomes zero
Show answer & solution

Answer: (C) It has equal values in both phases

Equal molar Gibbs energies define phase equilibrium.

Question 30

Which derivative equals −S?

  1. (∂G/∂P) at constant T
  2. (∂H/∂S) at constant P
  3. (∂U/∂V) at constant S
  4. (∂G/∂T) at constant P
Show answer & solution

Answer: (D) (∂G/∂T) at constant P

(∂G/∂P)T = V.

Question 31

Which derivative equals temperature?

  1. (∂G/∂P) at constant T
  2. (∂U/∂S) at constant V
  3. (∂A/∂T) at constant V
  4. (∂U/∂V) at constant S
Show answer & solution

Answer: (B) (∂U/∂S) at constant V

Also T = (∂H/∂S)P.

Question 32

What is the Joule–Thomson coefficient of an ideal gas?

  1. Negative always
  2. One
  3. Zero
  4. Infinite
Show answer & solution

Answer: (C) Zero

Enthalpy of an ideal gas depends only on temperature.

Question 33

What is the principle of corresponding states based on?

  1. Boiling points only
  2. Absolute temperatures
  3. Molecular weights only
  4. Reduced properties scaled by critical constants
Show answer & solution

Answer: (D) Reduced properties scaled by critical constants

Three-parameter versions add the acentric factor.

Practice these 33 questions interactively →