Engineering, Management, Agriculture and Veterinary MCQs are now live. FPSC, PPSC, EPE, IELTS & GRE coming soon.

Plant Economics & Safety: Operating Costs and Optimisation

Chemical Engineering · Plant Economics & Safety

41 questions, each with the answer and a worked solution.

Practice interactively and track your score →
Question 1

What are variable operating costs?

  1. Insurance only
  2. Depreciation only
  3. Costs that are fixed regardless of output
  4. Costs that change in proportion to production, such as raw materials and utilities
Show answer & solution

Answer: (D) Costs that change in proportion to production, such as raw materials and utilities

Raw materials are usually the largest variable cost.

Question 2

What are fixed operating costs?

  1. Catalysts used per tonne
  2. Costs that do not change with production rate, such as depreciation, insurance, rent and much labour
  3. Raw materials
  4. Utilities
Show answer & solution

Answer: (B) Costs that do not change with production rate, such as depreciation, insurance, rent and much labour

They continue even at low output.

Question 3

What is the break-even point?

  1. The maximum capacity
  2. The minimum cost point
  3. The point of maximum profit
  4. The production rate at which total revenue equals total cost
Show answer & solution

Answer: (D) The production rate at which total revenue equals total cost

Above it the plant makes a profit.

Question 4

What is the break-even output if fixed costs are Rs 1 million per year, selling price is Rs 50 per unit and variable cost is Rs 30 per unit?

  1. 20,000 units
  2. 33,333 units
  3. 50,000 units
  4. 100,000 units
Show answer & solution

Answer: (C) 50,000 units

Break-even = fixed cost/(price − variable cost).

Question 5

What is the contribution margin per unit?

  1. Selling price minus variable cost per unit
  2. Selling price minus fixed cost
  3. Total profit
  4. Depreciation per unit
Show answer & solution

Answer: (A) Selling price minus variable cost per unit

It covers fixed costs and profit.

Question 6

What is the shutdown point of a plant?

  1. The maximum profit point
  2. The output level at which revenue just covers variable costs, below which it is better to stop operating
  3. The design capacity
  4. The break-even point
Show answer & solution

Answer: (B) The output level at which revenue just covers variable costs, below which it is better to stop operating

Fixed costs are incurred even when shut down.

Question 7

What are general expenses in plant operating costs?

  1. Raw materials
  2. Catalysts
  3. Administrative, distribution, selling, research and finance costs
  4. Utilities
Show answer & solution

Answer: (C) Administrative, distribution, selling, research and finance costs

They are part of total product cost.

Question 8

What is the typical largest component of total product cost in commodity chemical plants?

  1. Raw materials
  2. Laboratory costs
  3. Advertising
  4. Office supplies
Show answer & solution

Answer: (A) Raw materials

For fertiliser plants, natural gas dominates.

Question 9

What does the optimum economic insulation thickness balance?

  1. Weight against strength
  2. Cost of insulation against cost of heat lost
  3. Colour against durability
  4. Pipe size against flow
Show answer & solution

Answer: (B) Cost of insulation against cost of heat lost

Total annual cost is minimised.

Question 10

What does the optimum pipe diameter balance?

  1. Flow against density
  2. Weight against colour
  3. Pressure against temperature
  4. Pipe capital cost against pumping energy cost
Show answer & solution

Answer: (D) Pipe capital cost against pumping energy cost

Larger pipes cost more but reduce pressure drop.

Question 11

What does the optimum reflux ratio in distillation balance?

  1. Feed rate against product rate
  2. Tray spacing against diameter
  3. Column capital cost against reboiler and condenser energy costs
  4. Pressure against temperature
Show answer & solution

Answer: (C) Column capital cost against reboiler and condenser energy costs

It is usually 1.1–1.5 times minimum reflux.

Question 12

What does the optimum number of effects in an evaporator balance?

  1. Pressure against temperature
  2. Feed rate against product rate
  3. Product quality against colour
  4. Equipment cost against steam savings
Show answer & solution

Answer: (D) Equipment cost against steam savings

More effects save steam but cost more.

Question 13

What is the optimum batch cycle time in batch processes?

  1. The cycle time that maximises production or profit per unit time, including downtime
  2. The longest possible time
  3. The shortest possible time always
  4. Zero
Show answer & solution

Answer: (A) The cycle time that maximises production or profit per unit time, including downtime

Reaction slows as conversion increases.

Question 14

What does linear programming optimise in refineries?

  1. Instrument selection
  2. Crude selection and product blending to maximise profit within constraints
  3. Heat exchanger area only
  4. Pump speed only
Show answer & solution

Answer: (B) Crude selection and product blending to maximise profit within constraints

It is widely used in refinery planning.

Question 15

What is the typical maintenance cost per year as a fraction of fixed capital in chemical plants?

  1. About 0.01%
  2. About 2–10%
  3. About 30%
  4. About 50%
Show answer & solution

Answer: (B) About 2–10%

Corrosive services have higher maintenance cost.

Question 16

What is plant capacity utilisation?

  1. The number of operators
  2. The design capacity
  3. Actual production as a percentage of rated capacity
  4. The plant area
Show answer & solution

Answer: (C) Actual production as a percentage of rated capacity

Low utilisation raises fixed cost per unit.

Question 17

What happens to fixed cost per unit of product when production increases?

  1. It increases
  2. It stays constant
  3. It becomes negative
  4. It decreases
Show answer & solution

Answer: (D) It decreases

Fixed costs are spread over more units.

Question 18

What is the main economic benefit of energy conservation in process plants?

  1. Lower utility costs and improved profitability
  2. Higher raw material use
  3. Lower product quality
  4. Higher depreciation
Show answer & solution

Answer: (A) Lower utility costs and improved profitability

Pinch analysis and heat recovery are common measures.

Question 19

What is the gross profit of a plant?

  1. Net profit after tax
  2. Revenue only
  3. Depreciation
  4. Revenue minus total product cost before tax
Show answer & solution

Answer: (D) Revenue minus total product cost before tax

Net profit = gross profit − income tax.

Question 20

What is net profit after tax if gross profit is Rs 10 million and tax rate is 30%?

  1. Rs 10 million
  2. Rs 7 million
  3. Rs 3 million
  4. Rs 13 million
Show answer & solution

Answer: (B) Rs 7 million

10 × (1 − 0.30).

Question 21

What does a cost–benefit analysis compare?

  1. The total expected costs of a project with its expected benefits
  2. Only benefits
  3. Technical design options without costs
  4. Only costs
Show answer & solution

Answer: (A) The total expected costs of a project with its expected benefits

It supports public sector project decisions.

Question 22

What is economic order quantity (EOQ) used for?

  1. Pump sizing
  2. Plant sizing
  3. Finding the order size that minimises total inventory ordering and holding costs
  4. Pipe sizing
Show answer & solution

Answer: (C) Finding the order size that minimises total inventory ordering and holding costs

EOQ = √(2DS/H).

Question 23

What is the main reason for keeping spare parts inventory?

  1. Reducing safety
  2. Reducing downtime when equipment fails
  3. Increasing production cost only
  4. Increasing taxes
Show answer & solution

Answer: (B) Reducing downtime when equipment fails

Critical spares are kept for key equipment.

Question 24

What is the effect of operating a plant below design capacity on unit production cost?

  1. It increases unit cost because fixed costs are spread over fewer units
  2. It reduces unit cost
  3. It has no effect
  4. It eliminates fixed costs
Show answer & solution

Answer: (A) It increases unit cost because fixed costs are spread over fewer units

Many Pakistani plants faced this during gas shortages.

Question 25

What is the margin of safety in break-even analysis?

  1. The variable cost
  2. The fixed cost
  3. The break-even sales
  4. The amount by which actual sales exceed break-even sales
Show answer & solution

Answer: (D) The amount by which actual sales exceed break-even sales

It shows how far sales can fall before losses.

Question 26

What is the profit at 80,000 units if fixed costs are Rs 1 million, price Rs 50 and variable cost Rs 30 per unit?

  1. Rs 1,600,000
  2. Rs 2,400,000
  3. Rs 600,000
  4. Rs 400,000
Show answer & solution

Answer: (C) Rs 600,000

80,000 × 20 − 1,000,000.

Question 27

What is the main purpose of process optimisation?

  1. Increasing waste
  2. Finding operating conditions or designs that maximise profit or minimise cost within constraints
  3. Maximising production regardless of cost
  4. Minimising safety
Show answer & solution

Answer: (B) Finding operating conditions or designs that maximise profit or minimise cost within constraints

Objective functions and constraints define the problem.

Question 28

What is an objective function in optimisation?

  1. The plant capacity only
  2. The constraints
  3. The quantity to be maximised or minimised, such as profit or cost
  4. The decision variables
Show answer & solution

Answer: (C) The quantity to be maximised or minimised, such as profit or cost

Decision variables are adjusted to optimise it.

Question 29

What does the term constraint mean in process optimisation?

  1. The objective
  2. A limit such as equipment capacity, safety limit or product specification
  3. A decision variable
  4. The profit
Show answer & solution

Answer: (B) A limit such as equipment capacity, safety limit or product specification

Constraints define the feasible region.

Question 30

What is the optimum cooling water outlet temperature in a heat exchanger design based on?

  1. Balancing water pumping and cooling cost against exchanger area
  2. Only water cost
  3. Only exchanger area
  4. Only safety
Show answer & solution

Answer: (A) Balancing water pumping and cooling cost against exchanger area

Higher outlet temperature saves water but needs more area.

Question 31

What are utility costs in chemical plants?

  1. Raw material costs
  2. Labour costs only
  3. Depreciation
  4. Costs of steam, electricity, cooling water, fuel, compressed air and nitrogen
Show answer & solution

Answer: (D) Costs of steam, electricity, cooling water, fuel, compressed air and nitrogen

They are variable costs.

Question 32

What is the main cost driver for urea plants in Pakistan?

  1. Water price
  2. The price and availability of natural gas feedstock and fuel
  3. Labour wages
  4. Packing bags
Show answer & solution

Answer: (B) The price and availability of natural gas feedstock and fuel

Gas is the main feedstock.

Question 33

What is the main purpose of a cost centre in plant accounting?

  1. Tracking costs for a department or unit to control expenses
  2. Producing goods
  3. Increasing revenue
  4. Reducing taxes
Show answer & solution

Answer: (A) Tracking costs for a department or unit to control expenses

It supports budgeting.

Question 34

What is the incremental return on investment used for?

  1. Finding break-even
  2. Calculating depreciation
  3. Calculating total ROI only
  4. Comparing whether the extra investment in a more expensive alternative is justified by extra savings
Show answer & solution

Answer: (D) Comparing whether the extra investment in a more expensive alternative is justified by extra savings

The increment must earn at least the minimum acceptable return.

Question 35

What is the annual saving if insulation reduces heat loss by 100 kW and steam costs Rs 3 per kWh, for 8,000 hours a year?

  1. Rs 800,000
  2. Rs 24 million
  3. Rs 2.4 million
  4. Rs 240,000
Show answer & solution

Answer: (C) Rs 2.4 million

100 × 3 × 8,000.

Question 36

What is simple payback for an energy saving project costing Rs 6 million that saves Rs 2 million per year?

  1. 2 years
  2. 3 years
  3. 6 years
  4. 12 years
Show answer & solution

Answer: (B) 3 years

6/2.

Question 37

What does on-stream factor (availability) mean?

  1. The number of shifts
  2. The number of products
  3. The fraction of the year the plant is actually operating
  4. The design capacity
Show answer & solution

Answer: (C) The fraction of the year the plant is actually operating

Plants typically operate about 8,000 hours per year (about 91%).

Question 38

What is the typical number of operating hours assumed per year for a continuous chemical plant?

  1. About 2,000 hours
  2. About 5,000 hours
  3. About 8,000 hours
  4. About 8,760 hours with no shutdowns
Show answer & solution

Answer: (C) About 8,000 hours

Time is allowed for maintenance shutdowns.

Question 39

What is a learning curve effect in operating costs?

  1. No change with experience
  2. Unit costs rising over time
  3. Wages increasing
  4. Unit costs falling as operating experience accumulates
Show answer & solution

Answer: (D) Unit costs falling as operating experience accumulates

It applies to new technologies and plants.

Question 40

What is the purpose of a budget in plant operations?

  1. Planning and controlling expected revenue and expenses over a period
  2. Measuring flow
  3. Designing equipment
  4. Recording accidents
Show answer & solution

Answer: (A) Planning and controlling expected revenue and expenses over a period

Variance analysis compares actual with budget.

Question 41

What is the cost of 1 tonne of steam if it needs 2.8 GJ of fuel at Rs 1,500 per GJ, ignoring other costs?

  1. Rs 1,500
  2. Rs 2,800
  3. Rs 5,360
  4. Rs 4,200
Show answer & solution

Answer: (D) Rs 4,200

2.8 × 1,500.

Practice these 41 questions interactively →