What is the purpose of personal protective equipment (PPE)?
Show answer & solution
Answer: (B) Protecting workers from residual hazards that cannot be eliminated by other controls
Examples include helmets, goggles, gloves and respirators.
Chemical Engineering · Plant Economics & Safety
43 questions, each with the answer and a worked solution.
Practice interactively and track your score →What is the purpose of personal protective equipment (PPE)?
Answer: (B) Protecting workers from residual hazards that cannot be eliminated by other controls
Examples include helmets, goggles, gloves and respirators.
What is a permit-to-work system?
Answer: (D) A formal written system controlling hazardous work such as hot work, confined space entry and electrical work
It ensures hazards are identified and controlled before work starts.
What is lockout–tagout (LOTO)?
Answer: (A) Isolating energy sources and locking and tagging them so equipment cannot be started during maintenance
It protects maintenance workers from unexpected energisation.
What is a confined space?
Answer: (C) An enclosed space with limited entry and exit not designed for continuous occupancy, such as tanks and vessels
Hazards include oxygen deficiency and toxic gases.
What is the safe oxygen range for entry into a confined space?
Answer: (C) About 19.5% to 23.5% by volume
Gas testing is required before and during entry.
Why must a standby person (attendant) be present outside a confined space during entry?
Answer: (D) To monitor entrants and summon rescue in an emergency without entering unprotected
Many deaths occur among untrained rescuers.
What is hot work?
Answer: (B) Work that produces flames, sparks or heat, such as welding, cutting and grinding
It requires a hot work permit and gas testing.
What are the main hazards of hydrogen sulphide?
Answer: (A) It is highly toxic and at high concentrations paralyses the sense of smell
It smells of rotten eggs at low concentrations.
What does TLV-TWA mean?
Answer: (B) Threshold limit value as a time-weighted average for an 8-hour day and 40-hour week
TLVs are published by ACGIH.
What does IDLH mean?
Answer: (D) Immediately dangerous to life or health concentration
Above IDLH, a self-contained breathing apparatus is required.
What is LD50?
Answer: (A) The dose that kills 50% of a test animal population
It is a measure of acute toxicity.
What is a safety data sheet (SDS)?
Answer: (D) A document giving hazards, safe handling, PPE, first aid and emergency information for a chemical
Under GHS it has 16 sections.
What is GHS?
Answer: (C) The Globally Harmonized System of classification and labelling of chemicals
It uses standard pictograms and signal words.
What is the common occupational noise exposure limit for an 8-hour day?
Answer: (C) About 85 dB(A)
Hearing protection is needed above it.
Which type of extinguisher is suitable for electrical fires?
Answer: (B) Carbon dioxide or dry chemical powder
Water conducts electricity.
Why should water jets not be used on burning oil fires?
Answer: (D) Water can spread the burning oil and cause violent boil-over
Foam is used for flammable liquid fires.
Which extinguishing agent is preferred for large flammable liquid fires in tank farms?
Answer: (A) Foam
Foam blankets the surface and excludes air.
What does Heinrich's accident triangle suggest?
Answer: (B) For every major injury there are many minor injuries and many more near misses
His ratio was 1:29:300.
What is a near miss?
Answer: (C) An unplanned event that could have caused injury or damage but did not
Reporting near misses helps prevent accidents.
What is the main law covering factory safety, health and welfare in Pakistan?
Answer: (D) The Factories Act 1934, supplemented by provincial occupational safety and health laws
Provinces such as Sindh and Punjab have passed occupational safety and health acts.
What is ISO 45001?
Answer: (B) An international standard for occupational health and safety management systems
It replaced OHSAS 18001.
What lesson did the 2012 Baldia Town factory fire in Karachi highlight?
Answer: (A) The need for fire exits, alarms and enforcement of building and fire safety rules
Hundreds of workers died because exits were blocked or locked.
What is the main purpose of a safety audit?
Answer: (D) Systematically checking compliance with safety standards and identifying improvements
Audits may be internal or external.
What is a job safety analysis (JSA)?
Answer: (C) Breaking a task into steps to identify hazards and controls for each step
It is also called job hazard analysis.
What is an emergency response plan?
Answer: (A) A documented plan for responding to fires, releases and other emergencies, including evacuation and communication
Regular drills test the plan.
What is the purpose of a muster point?
Answer: (B) A designated safe assembly area where workers gather during evacuation for a headcount
Wind direction indicators help choose upwind muster points.
Why are windsocks installed in plants handling toxic gases?
Answer: (A) To show wind direction so that people can evacuate upwind or crosswind
They are critical in chlorine and H₂S facilities.
What is the main hazard of working at height?
Answer: (C) Falls causing serious injury or death
Guardrails and full-body harnesses are used.
What is ergonomics in industrial safety?
Answer: (B) Designing work and equipment to fit human capabilities and reduce strain injuries
Poor lifting causes back injuries.
What is a self-contained breathing apparatus (SCBA)?
Answer: (D) A respirator supplying air from a cylinder carried by the user
It is required in oxygen-deficient or IDLH atmospheres.
What is the lost time injury frequency rate (LTIFR)?
Answer: (B) The number of lost-time injuries per million (or 200,000) hours worked
It is a common lagging safety indicator.
What are leading safety indicators?
Answer: (A) Proactive measures such as training completed, inspections and near-miss reports
Lagging indicators measure past harm.
What is the purpose of a gas detector in process plants?
Answer: (C) Detecting flammable or toxic gas leaks early to trigger alarms and actions
Fixed and portable detectors are used.
What is the primary first aid for chemical splashes in the eyes?
Answer: (D) Flushing with plenty of clean water for at least 15 minutes and seeking medical help
Eyewash stations must be close to hazards.
What is behaviour-based safety?
Answer: (C) Improving safety by observing and encouraging safe behaviours of workers
It complements engineering controls.
What is the role of a safety officer in a plant?
Answer: (D) Advising management, monitoring compliance, investigating incidents and promoting safe practices
Safety remains a line management responsibility.
What is root cause analysis in accident investigation?
Answer: (C) Identifying underlying system causes rather than only immediate unsafe acts
Methods include 5-Whys and fishbone diagrams.
What is the purpose of an eyewash and safety shower near chemical handling areas?
Answer: (D) Providing immediate decontamination after chemical exposure
They must be within a few seconds' reach.
What is a toolbox talk?
Answer: (A) A short safety briefing given to workers before starting a job
It reinforces hazards and controls for the day's work.
What is the main hazard of nitrogen used for purging?
Answer: (C) Asphyxiation by displacing oxygen in enclosed spaces
Nitrogen is odourless and gives no warning.
What does a red tag on equipment usually mean?
Answer: (B) Danger, do not operate
Tags are part of LOTO systems.
What is the purpose of a fire and gas system?
Answer: (C) Detecting fire and gas leaks and initiating alarms, shutdowns and fire protection
It works alongside ESD systems.
What is the main reason for keeping walkways and exits clear in factories?
Answer: (B) To allow quick, safe evacuation and prevent trips and falls
Blocked exits have caused many fire deaths.