Engineering, Management, Agriculture and Veterinary MCQs are now live. FPSC, PPSC, EPE, IELTS & GRE coming soon.

Chemical Process Industries: Polymers and Petrochemicals

Chemical Engineering · Chemical Process Industries

36 questions, each with the answer and a worked solution.

Practice interactively and track your score →
Question 1

What is polymerisation?

  1. Joining of small monomer molecules into long-chain macromolecules
  2. Breaking of polymers
  3. Distillation of monomers
  4. Crystallisation of salts
Show answer & solution

Answer: (A) Joining of small monomer molecules into long-chain macromolecules

Addition and condensation polymerisation are the two main types.

Question 2

What is addition (chain-growth) polymerisation?

  1. Fermentation
  2. Hydrolysis
  3. Polymerisation of unsaturated monomers by adding units to a growing chain without by-products
  4. Polymerisation with elimination of water
Show answer & solution

Answer: (C) Polymerisation of unsaturated monomers by adding units to a growing chain without by-products

Polyethylene and PVC are addition polymers.

Question 3

What is condensation (step-growth) polymerisation?

  1. Polymerisation of vinyl monomers only
  2. Free radical polymerisation
  3. Cracking
  4. Polymerisation in which monomers join with elimination of a small molecule such as water
Show answer & solution

Answer: (D) Polymerisation in which monomers join with elimination of a small molecule such as water

Nylon and polyester are condensation polymers.

Question 4

What is the monomer of PVC?

  1. Propylene
  2. Vinyl chloride
  3. Styrene
  4. Ethylene
Show answer & solution

Answer: (B) Vinyl chloride

Engro Polymer at Port Qasim produces PVC.

Question 5

How is vinyl chloride monomer produced?

  1. By fermenting sugar
  2. By cracking ethylene dichloride made from ethylene and chlorine
  3. By oxidising ethanol
  4. By chlorinating methane only
Show answer & solution

Answer: (B) By cracking ethylene dichloride made from ethylene and chlorine

Balanced processes use direct chlorination and oxychlorination.

Question 6

What are the monomers for polyethylene terephthalate (PET)?

  1. Ethylene and propylene
  2. Styrene and butadiene
  3. Purified terephthalic acid (PTA) and monoethylene glycol
  4. Vinyl chloride and acetylene
Show answer & solution

Answer: (C) Purified terephthalic acid (PTA) and monoethylene glycol

PTA is produced in Pakistan at Port Qasim.

Question 7

What is PTA produced from?

  1. Fermentation of sugar
  2. Cracking of ethane
  3. Chlorination of benzene
  4. Oxidation of para-xylene
Show answer & solution

Answer: (D) Oxidation of para-xylene

Cobalt–manganese–bromide catalysts are used in acetic acid.

Question 8

What is the main use of PET in Pakistan?

  1. Polyester fibre for textiles and bottles
  2. Cement
  3. Fertiliser
  4. Fuel
Show answer & solution

Answer: (A) Polyester fibre for textiles and bottles

The textile industry is a major consumer.

Question 9

What is the difference between LDPE and HDPE?

  1. They are identical
  2. LDPE has branched chains and lower density; HDPE has linear chains and higher density
  3. HDPE is branched
  4. LDPE is a condensation polymer
Show answer & solution

Answer: (B) LDPE has branched chains and lower density; HDPE has linear chains and higher density

LDPE is made at high pressure with free radicals.

Question 10

Which catalysts are used for producing HDPE and polypropylene at low pressure?

  1. Platinum gauze
  2. Promoted iron
  3. Vanadium pentoxide
  4. Ziegler–Natta or metallocene catalysts
Show answer & solution

Answer: (D) Ziegler–Natta or metallocene catalysts

Ziegler and Natta received the 1963 Nobel Prize.

Question 11

What is a thermoplastic?

  1. A ceramic
  2. A polymer that sets permanently on heating
  3. A polymer that softens on heating and can be remoulded
  4. A natural rubber only
Show answer & solution

Answer: (C) A polymer that softens on heating and can be remoulded

Polyethylene and PVC are thermoplastics.

Question 12

What is a thermosetting polymer?

  1. A polymer that forms a cross-linked network and cannot be remelted
  2. A liquid monomer
  3. A fibre only
  4. A polymer that softens on heating
Show answer & solution

Answer: (A) A polymer that forms a cross-linked network and cannot be remelted

Bakelite and epoxy resins are thermosets.

Question 13

What is vulcanisation of rubber?

  1. Cross-linking rubber with sulphur to improve strength and elasticity
  2. Polymerising isoprene
  3. Melting rubber
  4. Dissolving rubber
Show answer & solution

Answer: (A) Cross-linking rubber with sulphur to improve strength and elasticity

Charles Goodyear discovered it.

Question 14

What is nylon 6,6 made from?

  1. Caprolactam only
  2. Ethylene glycol and PTA
  3. Vinyl chloride
  4. Hexamethylenediamine and adipic acid
Show answer & solution

Answer: (D) Hexamethylenediamine and adipic acid

Nylon 6 is made from caprolactam.

Question 15

What is the main feedstock for steam cracking to produce ethylene?

  1. Limestone
  2. Molasses
  3. Ethane, LPG or naphtha
  4. Coal
Show answer & solution

Answer: (C) Ethane, LPG or naphtha

Cracking occurs at about 800–850 °C with short residence time.

Question 16

What is the degree of polymerisation?

  1. The density
  2. The number of monomer units in a polymer chain
  3. The temperature of polymerisation
  4. The catalyst activity
Show answer & solution

Answer: (B) The number of monomer units in a polymer chain

Molecular weight = DP × monomer molecular weight.

Question 17

What is the glass transition temperature of a polymer?

  1. The melting point of crystals
  2. The boiling point
  3. The decomposition temperature
  4. The temperature at which an amorphous polymer changes from a hard glassy to a soft rubbery state
Show answer & solution

Answer: (D) The temperature at which an amorphous polymer changes from a hard glassy to a soft rubbery state

It governs the use temperature of plastics.

Question 18

Which polymerisation technique uses monomer droplets suspended in water with a stabiliser?

  1. Solution polymerisation
  2. Suspension polymerisation
  3. Bulk polymerisation
  4. Gas-phase polymerisation
Show answer & solution

Answer: (B) Suspension polymerisation

PVC is mostly made by suspension polymerisation.

Question 19

What is methanol produced from industrially?

  1. Synthesis gas (CO and H₂) over copper–zinc catalyst
  2. Cracking of naphtha
  3. Oxidation of methane by air only
  4. Fermentation of sugar
Show answer & solution

Answer: (A) Synthesis gas (CO and H₂) over copper–zinc catalyst

CO + 2H₂ → CH₃OH.

Question 20

What is formaldehyde produced from?

  1. Fermentation
  2. Chlorination of methane
  3. Oxidation of methanol over silver or iron–molybdenum catalysts
  4. Steam cracking
Show answer & solution

Answer: (C) Oxidation of methanol over silver or iron–molybdenum catalysts

It is used in urea- and phenol-formaldehyde resins.

Question 21

What is the main use of urea–formaldehyde resin?

  1. Glass making
  2. Adhesive for particleboard and plywood
  3. Fuel
  4. Fertiliser
Show answer & solution

Answer: (B) Adhesive for particleboard and plywood

It is a thermosetting resin.

Question 22

What is styrene made from?

  1. Chlorination of ethylene
  2. Fermentation
  3. Dehydrogenation of ethylbenzene
  4. Oxidation of toluene
Show answer & solution

Answer: (C) Dehydrogenation of ethylbenzene

Ethylbenzene comes from benzene and ethylene.

Question 23

What is the main hazard during storage of styrene monomer?

  1. Uncontrolled self-polymerisation releasing heat
  2. Freezing
  3. Corrosion of glass
  4. Explosion with water
Show answer & solution

Answer: (A) Uncontrolled self-polymerisation releasing heat

Inhibitors are added and temperature is controlled.

Question 24

What is extrusion in plastics processing?

  1. Recycling only
  2. Polymerisation in reactors
  3. Moulding in closed dies
  4. Forcing molten polymer through a die to make continuous profiles such as pipes and films
Show answer & solution

Answer: (D) Forcing molten polymer through a die to make continuous profiles such as pipes and films

Injection moulding is used for discrete parts.

Question 25

What is the monomer of polypropylene?

  1. Vinyl chloride
  2. Ethylene
  3. Propylene
  4. Styrene
Show answer & solution

Answer: (C) Propylene

It is made with Ziegler–Natta catalysts.

Question 26

What is the monomer of polystyrene?

  1. Ethylene
  2. Butadiene
  3. Styrene
  4. Propylene
Show answer & solution

Answer: (C) Styrene

Expanded polystyrene is used for packaging.

Question 27

What is SBR?

  1. Polyurethane
  2. Styrene–butadiene rubber, a synthetic rubber used in tyres
  3. Natural rubber
  4. Silicone rubber
Show answer & solution

Answer: (B) Styrene–butadiene rubber, a synthetic rubber used in tyres

It is made by emulsion polymerisation.

Question 28

What is the main use of caprolactam?

  1. Production of nylon 6
  2. Production of PVC
  3. Production of fertiliser only
  4. Production of PET
Show answer & solution

Answer: (A) Production of nylon 6

Ammonium sulphate is a by-product.

Question 29

What is polyurethane formed from?

  1. Caprolactam
  2. Ethylene and propylene
  3. Vinyl chloride
  4. Reaction of diisocyanates with polyols
Show answer & solution

Answer: (D) Reaction of diisocyanates with polyols

It is used in foams and coatings.

Question 30

What is the main use of plasticisers such as phthalates in PVC?

  1. Polymerising VCM
  2. Making PVC rigid
  3. Colouring PVC
  4. Making PVC flexible
Show answer & solution

Answer: (D) Making PVC flexible

Rigid PVC pipes use little plasticiser.

Question 31

What is injection moulding?

  1. Extruding pipes
  2. Injecting molten plastic into a closed mould to form discrete parts
  3. Blowing films
  4. Spinning fibres
Show answer & solution

Answer: (B) Injecting molten plastic into a closed mould to form discrete parts

It is used for caps, crates and household items.

Question 32

What is blow moulding used for?

  1. Making hollow articles such as bottles
  2. Making fibres
  3. Making sheets
  4. Making pipes
Show answer & solution

Answer: (A) Making hollow articles such as bottles

PET bottles are made by stretch blow moulding of preforms.

Question 33

What is melt spinning?

  1. Dissolving polymer in solvent
  2. Coating films
  3. Extruding molten polymer through a spinneret to form fibres
  4. Moulding parts
Show answer & solution

Answer: (C) Extruding molten polymer through a spinneret to form fibres

Polyester and nylon fibres are melt spun.

Question 34

What is the number-average molecular weight of a polymer?

  1. The weight of the largest molecule
  2. The density
  3. The total weight of molecules divided by the total number of molecules
  4. The monomer weight
Show answer & solution

Answer: (C) The total weight of molecules divided by the total number of molecules

Weight-average molecular weight is always at least as large.

Question 35

What is the main use of LDPE?

  1. Car tyres
  2. Fibres for textiles
  3. Films and plastic bags
  4. Rigid pipes
Show answer & solution

Answer: (C) Films and plastic bags

Its flexibility suits packaging films.

Question 36

What is the main feedstock for linear alkylbenzene (LAB) production?

  1. Glucose
  2. Ethanol and acetic acid
  3. Vinyl chloride
  4. Benzene and linear paraffins (or olefins) from kerosene
Show answer & solution

Answer: (D) Benzene and linear paraffins (or olefins) from kerosene

LAB is sulphonated to LAS.

Practice these 36 questions interactively →