Engineering, Management, Agriculture and Veterinary MCQs are now live. FPSC, PPSC, EPE, IELTS & GRE coming soon.

Chemical Process Industries: Acids and Alkalis

Chemical Engineering · Chemical Process Industries

35 questions, each with the answer and a worked solution.

Practice interactively and track your score →
Question 1

Which process is used to manufacture sulphuric acid industrially?

  1. Ostwald process
  2. Contact process
  3. Lead chamber process only in modern plants
  4. Solvay process
Show answer & solution

Answer: (B) Contact process

SO₂ is oxidised to SO₃ over vanadium pentoxide.

Question 2

What is the source of SO₂ in most sulphuric acid plants?

  1. Fermentation
  2. Electrolysis
  3. Cracking of oil
  4. Burning elemental sulphur in air
Show answer & solution

Answer: (D) Burning elemental sulphur in air

Smelter off-gases are also used.

Question 3

What is the optimum temperature range for SO₂ oxidation over V₂O₅ catalyst?

  1. About 0–25 °C
  2. About 50–100 °C
  3. About 400–600 °C
  4. About 1,000–1,200 °C
Show answer & solution

Answer: (C) About 400–600 °C

Interbed cooling raises equilibrium conversion.

Question 4

What is the double contact double absorption (DCDA) process?

  1. Absorbing SO₃ after initial beds and then passing gas through further beds, achieving above 99.7% conversion
  2. A single absorption process
  3. A process for nitric acid
  4. A process for soda ash
Show answer & solution

Answer: (A) Absorbing SO₃ after initial beds and then passing gas through further beds, achieving above 99.7% conversion

It greatly reduces SO₂ emissions.

Question 5

Why is SO₃ absorbed in 98–99% sulphuric acid rather than water?

  1. Water is too expensive
  2. SO₃ does not react with water
  3. 98% acid boils at low temperature
  4. Water forms a stable acid mist that is hard to absorb
Show answer & solution

Answer: (D) Water forms a stable acid mist that is hard to absorb

Oleum is produced by absorbing SO₃ in concentrated acid.

Question 6

What is oleum?

  1. Hydrochloric acid
  2. Fuming sulphuric acid containing dissolved SO₃
  3. Dilute sulphuric acid
  4. Nitric acid mixture
Show answer & solution

Answer: (B) Fuming sulphuric acid containing dissolved SO₃

Oleum is expressed as % free SO₃.

Question 7

How is hydrochloric acid commonly produced in chlor-alkali complexes?

  1. By fermentation
  2. By the contact process
  3. By burning hydrogen in chlorine and absorbing HCl in water
  4. By reacting salt with nitric acid
Show answer & solution

Answer: (C) By burning hydrogen in chlorine and absorbing HCl in water

It is also a by-product of organic chlorination.

Question 8

What are the products of brine electrolysis in a chlor-alkali plant?

  1. Chlorine, caustic soda and hydrogen
  2. Hydrochloric acid only
  3. Soda ash and ammonium chloride
  4. Sodium metal and oxygen
Show answer & solution

Answer: (A) Chlorine, caustic soda and hydrogen

2NaCl + 2H₂O → Cl₂ + 2NaOH + H₂.

Question 9

Which chlor-alkali cell technology is now preferred for environmental and energy reasons?

  1. Diaphragm cell with asbestos
  2. Lead chamber cell
  3. Mercury cell
  4. Membrane cell
Show answer & solution

Answer: (D) Membrane cell

Mercury cells are being phased out under the Minamata Convention.

Question 10

In a membrane chlor-alkali cell, what is produced at the anode?

  1. Sodium metal
  2. Chlorine gas
  3. Hydrogen gas
  4. Caustic soda
Show answer & solution

Answer: (B) Chlorine gas

Hydrogen and caustic form at the cathode.

Question 11

What is the function of the ion-exchange membrane in a chlor-alkali cell?

  1. It allows all ions to pass
  2. It stops current flow
  3. It produces chlorine
  4. It allows sodium ions to pass while blocking chloride and hydroxide, giving pure caustic
Show answer & solution

Answer: (D) It allows sodium ions to pass while blocking chloride and hydroxide, giving pure caustic

Perfluorinated membranes are used.

Question 12

What is the typical concentration of caustic soda from membrane cells before evaporation?

  1. About 1%
  2. About 32–35%
  3. About 70%
  4. About 98%
Show answer & solution

Answer: (B) About 32–35%

It is evaporated to 50% for sale.

Question 13

Why must brine be purified before chlor-alkali electrolysis?

  1. Impurities increase chlorine purity
  2. Impurities are needed for reaction
  3. Calcium and magnesium impurities damage the membranes
  4. To add colour
Show answer & solution

Answer: (C) Calcium and magnesium impurities damage the membranes

Ion exchange gives ultrapure brine.

Question 14

Which process produces soda ash (sodium carbonate) from salt and limestone?

  1. Solvay (ammonia–soda) process
  2. Leblanc process in modern plants
  3. Haber process
  4. Contact process
Show answer & solution

Answer: (A) Solvay (ammonia–soda) process

The soda ash plant at Khewra uses the Solvay process.

Question 15

What is the role of ammonia in the Solvay process?

  1. It forms caustic soda
  2. It is used to precipitate sodium bicarbonate and is recovered and recycled
  3. It is a catalyst consumed completely
  4. It is the main product
Show answer & solution

Answer: (B) It is used to precipitate sodium bicarbonate and is recovered and recycled

NH₃ is recovered from ammonium chloride with lime.

Question 16

What compound precipitates in the carbonation tower of the Solvay process?

  1. Sodium bicarbonate
  2. Calcium carbonate
  3. Ammonium chloride
  4. Sodium carbonate
Show answer & solution

Answer: (A) Sodium bicarbonate

NaCl + NH₃ + CO₂ + H₂O → NaHCO₃ + NH₄Cl.

Question 17

How is soda ash obtained from sodium bicarbonate in the Solvay process?

  1. By electrolysis
  2. By dissolution
  3. By calcination, 2NaHCO₃ → Na₂CO₃ + H₂O + CO₂
  4. By filtration only
Show answer & solution

Answer: (C) By calcination, 2NaHCO₃ → Na₂CO₃ + H₂O + CO₂

CO₂ released is recycled.

Question 18

What is the main by-product of the Solvay process?

  1. Hydrogen
  2. Chlorine
  3. Sodium sulphate
  4. Calcium chloride
Show answer & solution

Answer: (D) Calcium chloride

Its disposal is an environmental challenge.

Question 19

What is the main use of soda ash?

  1. Fuel
  2. Glass manufacture, detergents and chemicals
  3. Cement clinker
  4. Fertiliser
Show answer & solution

Answer: (B) Glass manufacture, detergents and chemicals

Glass making consumes about half of world soda ash.

Question 20

What is the difference between light and dense soda ash?

  1. They differ in bulk density; dense ash is preferred for glass making
  2. Dense ash is bicarbonate
  3. They have different chemical formulas
  4. Light ash is caustic soda
Show answer & solution

Answer: (A) They differ in bulk density; dense ash is preferred for glass making

Dense ash reduces dusting in furnaces.

Question 21

Which raw materials are used to produce bleaching powder?

  1. Soda ash and HCl
  2. Ammonia and CO₂
  3. Slaked lime and chlorine
  4. Salt and sulphuric acid
Show answer & solution

Answer: (C) Slaked lime and chlorine

It is used for water disinfection.

Question 22

How is sodium hypochlorite produced?

  1. By reacting HCl with lime
  2. By burning sodium
  3. By electrolysis of water only
  4. By reacting chlorine with dilute caustic soda
Show answer & solution

Answer: (D) By reacting chlorine with dilute caustic soda

It is used as liquid bleach.

Question 23

What is the main use of sulphuric acid globally?

  1. Fuel
  2. Production of phosphatic fertilisers
  3. Food preservation
  4. Glass making
Show answer & solution

Answer: (B) Production of phosphatic fertilisers

It is the most produced industrial chemical by volume.

Question 24

What is the Claus process?

  1. Production of nitric acid
  2. Production of soda ash
  3. Production of sulphuric acid directly
  4. Recovery of elemental sulphur from H₂S in refinery and gas plant acid gases
Show answer & solution

Answer: (D) Recovery of elemental sulphur from H₂S in refinery and gas plant acid gases

2H₂S + SO₂ → 3S + 2H₂O over alumina catalyst.

Question 25

What is the typical strength of nitric acid produced by the Ostwald process?

  1. About 5%
  2. About 35%
  3. About 55–68%
  4. About 98%
Show answer & solution

Answer: (C) About 55–68%

Concentrated acid needs extractive distillation.

Question 26

What is the purpose of the drying tower in a sulphur-burning sulphuric acid plant?

  1. To dry the product acid
  2. To dry combustion air with concentrated sulphuric acid to prevent acid mist and corrosion
  3. To cool SO₃
  4. To dry sulphur
Show answer & solution

Answer: (B) To dry combustion air with concentrated sulphuric acid to prevent acid mist and corrosion

Moisture forms mist with SO₃.

Question 27

What is the source of chlorine in water treatment plants?

  1. Bleaching earth
  2. Ammonia
  3. Liquid chlorine from chlor-alkali plants, supplied in pressure cylinders
  4. Sea salt directly
Show answer & solution

Answer: (C) Liquid chlorine from chlor-alkali plants, supplied in pressure cylinders

Hypochlorite is also used.

Question 28

What is the main use of caustic soda in industry?

  1. Pulp and paper, textiles, soaps, alumina and chemicals
  2. Cement clinker
  3. Fuel
  4. Fertiliser only
Show answer & solution

Answer: (A) Pulp and paper, textiles, soaps, alumina and chemicals

It is a major alkali in textile processing.

Question 29

Which acid is used for pickling steel to remove scale?

  1. Acetic acid
  2. Hydrochloric acid (or sulphuric acid)
  3. Nitric acid only
  4. Phosphoric acid only
Show answer & solution

Answer: (B) Hydrochloric acid (or sulphuric acid)

Spent pickle liquor needs regeneration or treatment.

Question 30

What is the main raw material for producing sodium silicate (water glass)?

  1. Ammonia and CO₂
  2. Limestone and clay
  3. Silica sand and soda ash fused at high temperature
  4. Salt and sulphuric acid
Show answer & solution

Answer: (C) Silica sand and soda ash fused at high temperature

It is used in detergents and adhesives.

Question 31

Which process produces phosphoric acid of high purity for food use?

  1. The thermal (furnace) process via elemental phosphorus
  2. The wet process only
  3. The contact process
  4. The Solvay process
Show answer & solution

Answer: (A) The thermal (furnace) process via elemental phosphorus

Wet-process acid can also be purified by solvent extraction.

Question 32

What gas is evolved at the cathode in a chlor-alkali membrane cell?

  1. Oxygen
  2. Carbon dioxide
  3. Chlorine
  4. Hydrogen
Show answer & solution

Answer: (D) Hydrogen

It is used as fuel or for hydrochloric acid.

Question 33

What is the electrical energy consumption of modern membrane chlor-alkali cells approximately?

  1. About 50 kWh per tonne
  2. About 500 kWh per tonne
  3. About 2,100–2,500 kWh per tonne of caustic soda
  4. About 20,000 kWh per tonne
Show answer & solution

Answer: (C) About 2,100–2,500 kWh per tonne of caustic soda

Electricity is the main cost.

Question 34

What is the purpose of a waste heat boiler after the sulphur burner in a sulphuric acid plant?

  1. To dry air
  2. To recover heat from hot SO₂ gas by raising steam
  3. To absorb SO₃
  4. To burn more sulphur
Show answer & solution

Answer: (B) To recover heat from hot SO₂ gas by raising steam

Sulphuric acid plants are net steam exporters.

Question 35

What is the colour of chlorine gas?

  1. Colourless
  2. Blue
  3. Reddish brown
  4. Greenish yellow
Show answer & solution

Answer: (D) Greenish yellow

It is toxic and heavier than air.

Practice these 35 questions interactively →