To which type of mines do the Coal Mines Regulations, 1926 apply?
Show answer & solution
Answer: (C) Coal mines
Metalliferous mines have their own regulations.
Mining Engineering · Mine Safety, Rescue & Legislation
37 questions, each with the answer and a worked solution.
Practice interactively and track your score →To which type of mines do the Coal Mines Regulations, 1926 apply?
Answer: (C) Coal mines
Metalliferous mines have their own regulations.
Which body grants certificates of competency such as manager's certificates under the coal mines regulations?
Answer: (A) Board of Mining Examinations
Certificates are granted after examination.
Which grades of manager's certificate are provided for coal mines?
Answer: (B) First class and second class
The required grade depends on the size of the mine.
What is the main duty of an overman in a coal mine?
Answer: (C) To supervise and inspect a district for safety, including gas, ventilation and roof
Overmen work under the manager and assistant manager.
What is the role of a mining sirdar in a coal mine?
Answer: (A) A competent person in charge of a section who inspects it for gas, ventilation and supports
Mining sirdars hold certificates of competency.
Who is allowed to fire shots in a coal mine under the regulations?
Answer: (B) A competent shotfirer holding the required certificate
Shotfirers test for gas before firing.
What must be kept and regularly brought up to date at every coal mine?
Answer: (D) Plans and sections of the workings
Accurate plans prevent dangerous approaches to old workings and boundaries.
Who is responsible for preparing and maintaining mine plans?
Answer: (C) A qualified mine surveyor
Plans must be certified as correct.
Why must every coal mine have at least two separate outlets to the surface?
Answer: (A) To provide an escape route if one is blocked and allow ventilation
This is a basic requirement of the regulations.
What type of lamps must be used in gassy coal mines under the regulations?
Answer: (D) Approved locked safety lamps
Only approved lamps that cannot ignite methane are allowed.
Why must safety lamps be locked before being issued?
Answer: (B) So that they cannot be opened underground and expose a flame
Lamps are checked in the lamp room.
What is prohibited in safety lamp (gassy) mines under the regulations?
Answer: (B) Carrying matches, lighters or smoking materials underground
Searches for contraband are made before descent.
What type of explosives may be used in gassy coal mines?
Answer: (A) Permitted explosives approved for such use
Permitted explosives are tested not to ignite firedamp.
What must be done before firing a shot in a coal mine?
Answer: (C) Test for gas, check stemming and make sure everyone is in a safe place
Shots are not fired if gas is present above the limit.
What is the purpose of systematic support rules in coal mines?
Answer: (D) To specify the type and spacing of roof and side supports for each working place
Rules are framed by the manager and approved under the regulations.
What precaution is required when workings approach old waterlogged workings or water bodies?
Answer: (A) Leaving barriers and drilling boreholes ahead and to the sides
These measures prevent inundation.
What is required before a district is entered at the start of a shift in a coal mine?
Answer: (D) An inspection by a competent person for gas, ventilation and roof conditions
Pre-shift inspection is a key duty of overmen and sirdars.
What must be done when dangerous gas or another danger is found in a working place?
Answer: (B) Withdraw persons and fence off the place until it is made safe
Danger boards are placed at the entrance to fenced places.
What is the purpose of a danger board or fence at the entrance to a working place?
Answer: (C) To stop anyone entering a place that is unsafe
Entry is allowed only after the danger is removed.
Why must ventilation be maintained continuously in a coal mine?
Answer: (B) To dilute and remove gases and provide fresh air to all working places
If the main fan stops, workers must be withdrawn as the regulations require.
Which equipment in coal mine shafts is required to protect against cage falls?
Answer: (C) Safety catches or other approved devices with overwind protection
Winding safety is covered in detail by the regulations.
Why must persons in charge of winding engines be competent and authorised?
Answer: (D) Winding accidents can kill many people at once
Winding enginemen must be qualified and trained.
What is required for electrical apparatus used in places where methane may be present?
Answer: (A) It must be of an approved flameproof or intrinsically safe type
Electrical equipment is a major potential ignition source.
Who examines safety lamps before they are issued to miners?
Answer: (B) A competent lamp room attendant
Defective lamps must not be issued.
What do the regulations require regarding inspection report books?
Answer: (A) Results of statutory inspections must be recorded and signed
Report books are examined by the manager and inspector.
Why must haulage roads have refuge holes at intervals?
Answer: (C) To give persons a safe place to stand when vehicles pass
Refuge holes prevent persons being struck by tubs or vehicles.
Why must roadways in coal mines be kept free of accumulations of coal dust?
Answer: (D) To reduce fire and explosion risk
Dust is cleaned and treated with stone dust.
What is the role of the assistant manager in a coal mine?
Answer: (D) To assist the manager in charge of a part of the mine or a shift
Larger mines appoint assistant managers holding certificates.
What must a manager do if he becomes aware of a dangerous condition that cannot be corrected at once?
Answer: (C) Withdraw persons from the danger and report as required
Manager's duties include withdrawal of workers from danger.
Why are gas testing certificates required for certain officials in coal mines?
Answer: (B) So that only trained persons test for methane and judge safety
Gas testing is a key safety duty.
Why must abandoned workings in a coal mine be fenced or sealed?
Answer: (A) They may contain dangerous gases or water and unsupported roof
Persons must not enter abandoned workings.
Why must every coal mine have arrangements for rescue and fire fighting?
Answer: (A) So that fires and emergencies can be dealt with quickly and safely
Firefighting equipment and trained persons must be available.
What is the purpose of a mine's withdrawal procedure when the main fan stops?
Answer: (B) To remove persons from the workings before gas accumulates
Workers return only after ventilation is restored and the mine is examined.
Who can take part in inspections under the regulations on behalf of the workers?
Answer: (D) Workmen's inspectors where provided for
Worker participation improves safety.
Why must persons be trained and examined before being given a certificate of competency?
Answer: (B) To ensure that only competent persons carry out safety-critical duties
Certificates apply to managers, overmen, sirdars, shotfirers and others.
What must be done with defective or damaged safety lamps?
Answer: (D) They must be withdrawn and not issued until repaired and tested
A defective lamp may ignite methane.
Why must roof and sides of working places be examined and made secure regularly?
Answer: (A) To prevent falls of roof and sides, a major cause of fatal accidents
Supervisors check supports during their inspections.