Engineering, Management, Agriculture and Veterinary MCQs are now live. FPSC, PPSC, EPE, IELTS & GRE coming soon.

Thermodynamics: Second Law and Entropy

Mechanical Engineering · Thermodynamics

39 questions, each with the answer and a worked solution.

Practice interactively and track your score →
Question 1

What is the main limitation of the first law of thermodynamics?

  1. It does not conserve energy
  2. It does not tell the direction in which a process can take place
  3. It applies only to cycles
  4. It applies only to gases
Show answer & solution

Answer: (B) It does not tell the direction in which a process can take place

The second law gives the direction of processes.

Question 2

What does the Kelvin–Planck statement of the second law state?

  1. It is impossible for a heat engine operating in a cycle to convert all the heat it receives from a single reservoir into work
  2. Heat can flow from cold to hot without work
  3. Energy is conserved
  4. Entropy of a crystal is zero at absolute zero
Show answer & solution

Answer: (A) It is impossible for a heat engine operating in a cycle to convert all the heat it receives from a single reservoir into work

A heat engine must reject some heat to a lower-temperature reservoir.

Question 3

What does the Clausius statement of the second law state?

  1. All heat can be converted into work
  2. Energy cannot be created
  3. Temperature cannot fall below zero
  4. It is impossible for heat to flow from a colder body to a hotter body without external work
Show answer & solution

Answer: (D) It is impossible for heat to flow from a colder body to a hotter body without external work

Refrigerators need work input to transfer heat from cold to hot.

Question 4

What does Kelvin–Planck's statement mainly deal with?

  1. Conservation of momentum
  2. Conservation of mass
  3. Conversion of heat into work
  4. Conversion of work into heat
Show answer & solution

Answer: (C) Conversion of heat into work

It sets the limit on heat engine efficiency.

Question 5

What is a perpetual motion machine of the second kind (PMM-2)?

  1. An engine that converts all heat from a single reservoir into work
  2. A machine that runs backwards
  3. An engine that creates energy
  4. A machine without friction
Show answer & solution

Answer: (A) An engine that converts all heat from a single reservoir into work

It violates the Kelvin–Planck statement.

Question 6

What is a heat engine?

  1. A device that measures heat
  2. A device that converts heat into work while operating in a cycle
  3. A device that converts work into heat only
  4. A device that stores heat
Show answer & solution

Answer: (B) A device that converts heat into work while operating in a cycle

It takes heat from a source and rejects part of it to a sink.

Question 7

What is thermal efficiency of a heat engine?

  1. The ratio of net work output to heat supplied
  2. The ratio of work to heat rejected
  3. The ratio of heat rejected to heat supplied
  4. The ratio of heat supplied to work output
Show answer & solution

Answer: (A) The ratio of net work output to heat supplied

η = W/Q₁ = 1 − Q₂/Q₁.

Question 8

What is the Carnot cycle made up of?

  1. Two isobaric and two isentropic processes
  2. Two isothermal and two isobaric processes
  3. Two reversible isothermal processes and two reversible adiabatic processes
  4. Two isochoric and two isentropic processes
Show answer & solution

Answer: (C) Two reversible isothermal processes and two reversible adiabatic processes

It was proposed by Sadi Carnot in 1824.

Question 9

In a Carnot cycle, at what condition is heat transferred?

  1. At constant volume
  2. At constant enthalpy
  3. At constant pressure
  4. At constant temperature
Show answer & solution

Answer: (D) At constant temperature

Heat is added and rejected during the isothermal processes.

Question 10

What is the efficiency of a Carnot engine operating between absolute temperatures T₁ and T₂?

  1. T₂/T₁
  2. 1 − T₂/T₁
  3. (T₁ + T₂)/T₁
  4. 1 − T₁/T₂
Show answer & solution

Answer: (B) 1 − T₂/T₁

T₁ is the source and T₂ the sink temperature in kelvin.

Question 11

On what does the efficiency of a Carnot cycle depend?

  1. The size of the engine
  2. The properties of the working substance
  3. The type of fuel
  4. Only the temperatures of the source and sink
Show answer & solution

Answer: (D) Only the temperatures of the source and sink

This is Carnot's theorem.

Question 12

Which cycle has the maximum efficiency between two given temperature limits?

  1. Carnot cycle
  2. Rankine cycle
  3. Brayton cycle
  4. Otto cycle
Show answer & solution

Answer: (A) Carnot cycle

No engine can be more efficient than a reversible engine between the same limits.

Question 13

Why is a Carnot cycle the most efficient?

  1. It has the fewest parts
  2. It is a fully reversible cycle
  3. It runs at constant pressure
  4. It uses the best fuel
Show answer & solution

Answer: (B) It is a fully reversible cycle

All reversible engines between the same temperatures have equal efficiency.

Question 14

Under what condition would a Carnot engine have 100% efficiency?

  1. If the source temperature were 0 °C
  2. If the working fluid were water
  3. If the sink temperature were absolute zero
  4. If both temperatures were equal
Show answer & solution

Answer: (C) If the sink temperature were absolute zero

Since absolute zero cannot be reached, 100% efficiency is impossible.

Question 15

What is the most effective way to increase the efficiency of a Carnot engine?

  1. Decrease the sink (lower) temperature
  2. Increase the sink temperature
  3. Keep both temperatures equal
  4. Decrease the source temperature
Show answer & solution

Answer: (A) Decrease the sink (lower) temperature

A change in T₂ has a greater effect than the same change in T₁.

Question 16

What is the efficiency of a Carnot engine working between 527 °C and 27 °C?

  1. 50%
  2. 62.5%
  3. 75%
  4. 95%
Show answer & solution

Answer: (B) 62.5%

η = 1 − 300/800 = 0.625.

Question 17

One reversible engine works between 900 K and T, and a second works between T and 400 K. If both produce equal work, what is T?

  1. 600 K
  2. 625 K
  3. 650 K
  4. 700 K
Show answer & solution

Answer: (C) 650 K

For equal work, T = (900 + 400)/2 = 650 K.

Question 18

A heat engine is claimed to produce 20 hp from 400 kcal/min while working between 227 °C and 27 °C. What can be said about this claim?

  1. It is possible only at high cost
  2. It is fully justified
  3. It is possible with good design
  4. It is impossible, because it exceeds the Carnot efficiency
Show answer & solution

Answer: (D) It is impossible, because it exceeds the Carnot efficiency

Carnot efficiency is 40%, but the claim implies about 53%.

Question 19

Can a real engine be designed with the same efficiency as a Carnot cycle?

  1. Yes, easily
  2. Yes, if it is made small
  3. Yes, with any fuel
  4. No, in practice it can only approach it, because real processes are irreversible
Show answer & solution

Answer: (D) No, in practice it can only approach it, because real processes are irreversible

Friction and finite temperature differences cause irreversibility.

Question 20

What is a refrigerator in thermodynamic terms?

  1. A device that transfers heat from a low-temperature body to a high-temperature body using work
  2. A device that produces work from heat
  3. A device that stores cold
  4. A device that creates energy
Show answer & solution

Answer: (A) A device that transfers heat from a low-temperature body to a high-temperature body using work

It works on a reversed heat engine cycle.

Question 21

What is the COP of a Carnot refrigerator working between T₁ (hot) and T₂ (cold)?

  1. T₁/(T₁ − T₂)
  2. T₂/(T₁ − T₂)
  3. (T₁ − T₂)/T₁
  4. T₁/T₂
Show answer & solution

Answer: (B) T₂/(T₁ − T₂)

It increases as the temperature difference decreases.

Question 22

What happens to the temperature of a closed room if a running refrigerator's door is left open?

  1. The room cools down
  2. The room gradually warms up
  3. The room cools to the refrigerator's temperature
  4. The room temperature stays the same
Show answer & solution

Answer: (B) The room gradually warms up

The motor's work input is also released as heat into the room.

Question 23

What is entropy?

  1. A property that measures the degree of molecular disorder or the unavailability of energy for work
  2. A form of energy
  3. The temperature of a body
  4. The total heat of a body
Show answer & solution

Answer: (A) A property that measures the degree of molecular disorder or the unavailability of energy for work

Its change is defined as dS = δQ_rev/T.

Question 24

What is the SI unit of entropy?

  1. J/kg
  2. J·K
  3. K/J
  4. J/K
Show answer & solution

Answer: (D) J/K

Specific entropy is measured in J/kg·K.

Question 25

What is the change in entropy during a reversible adiabatic process?

  1. Negative
  2. Maximum
  3. Infinite
  4. Zero
Show answer & solution

Answer: (D) Zero

This is why it is called an isentropic process.

Question 26

What does the Clausius inequality state?

  1. ∮δQ/T is always positive
  2. For any cycle, ∮δQ/T ≤ 0, with equality for reversible cycles
  3. ∮δQ = 0 for all cycles
  4. Entropy always decreases
Show answer & solution

Answer: (B) For any cycle, ∮δQ/T ≤ 0, with equality for reversible cycles

It leads to the definition of entropy.

Question 27

What is the principle of increase of entropy?

  1. Entropy always decreases
  2. Entropy is not a property
  3. The entropy of an isolated system increases during an irreversible process and remains constant during a reversible process
  4. Entropy is always constant
Show answer & solution

Answer: (C) The entropy of an isolated system increases during an irreversible process and remains constant during a reversible process

The entropy of the universe tends to increase.

Question 28

If heat is exchanged reversibly, which property of the working substance changes in direct proportion to the heat transferred at a given temperature?

  1. Entropy
  2. Density
  3. Pressure
  4. Volume
Show answer & solution

Answer: (A) Entropy

dS = δQ_rev/T.

Question 29

What does the area under a process curve on a T–s diagram represent?

  1. Change in pressure
  2. Change in volume
  3. Work done
  4. Heat transferred
Show answer & solution

Answer: (D) Heat transferred

On a p–V diagram, the area under the curve represents work.

Question 30

What does the third law of thermodynamics state?

  1. The entropy of a perfect crystalline substance is zero at absolute zero temperature
  2. Temperature is measured by equilibrium
  3. Energy is conserved
  4. Heat flows from hot to cold
Show answer & solution

Answer: (A) The entropy of a perfect crystalline substance is zero at absolute zero temperature

It also implies that absolute zero cannot be reached.

Question 31

What is available energy (exergy)?

  1. The total heat of a system
  2. The maximum useful work that can be obtained from energy relative to the surroundings
  3. The energy lost to friction
  4. The internal energy only
Show answer & solution

Answer: (B) The maximum useful work that can be obtained from energy relative to the surroundings

Unavailable energy is the part that must be rejected to the surroundings.

Question 32

What are the main causes of irreversibility in real processes?

  1. Perfect insulation
  2. Slow, frictionless processes
  3. Friction, unrestrained expansion, heat transfer through a finite temperature difference and mixing
  4. Constant temperature
Show answer & solution

Answer: (C) Friction, unrestrained expansion, heat transfer through a finite temperature difference and mixing

Irreversibility always increases entropy.

Question 33

What conditions must be met for a cycle to be reversible?

  1. Free expansion
  2. High speed and friction
  3. No friction or free expansion, and heat transfer only across infinitesimally small temperature differences
  4. Large temperature differences
Show answer & solution

Answer: (C) No friction or free expansion, and heat transfer only across infinitesimally small temperature differences

The working substance must be at the same temperature as the source or sink during heat transfer.

Question 34

For a reversible heat transfer process, what must the temperature difference between the source and the working substance be?

  1. Very large
  2. Infinite
  3. Moderate
  4. Zero (infinitesimally small)
Show answer & solution

Answer: (D) Zero (infinitesimally small)

Heat transfer across a finite temperature difference is irreversible.

Question 35

Why is the actual efficiency of a heat engine always lower than the Carnot efficiency?

  1. Carnot engines are smaller
  2. Real engines have irreversibilities such as friction and heat losses
  3. Real engines use better fuel
  4. Carnot engines need no heat
Show answer & solution

Answer: (B) Real engines have irreversibilities such as friction and heat losses

Carnot efficiency is the theoretical upper limit.

Question 36

What is the efficiency of a reversible heat engine compared with an irreversible engine between the same reservoirs?

  1. They are always equal
  2. The irreversible engine is more efficient
  3. It depends on the fuel
  4. The reversible engine is always more efficient
Show answer & solution

Answer: (D) The reversible engine is always more efficient

This is part of Carnot's theorem.

Question 37

What happens to the entropy of an isolated system during an irreversible process?

  1. It decreases
  2. It remains constant
  3. It increases
  4. It becomes zero
Show answer & solution

Answer: (C) It increases

Irreversibility generates entropy.

Question 38

What is the change in entropy of a perfect gas during an isothermal expansion?

  1. mR ln(V₂/V₁)
  2. Infinite
  3. mcv ln(T₂/T₁)
  4. Zero
Show answer & solution

Answer: (A) mR ln(V₂/V₁)

Entropy increases because heat is absorbed at constant temperature.

Question 39

What does the area enclosed by a cycle on a p–V diagram represent?

  1. Net work done during the cycle
  2. Change in entropy
  3. Heat rejected only
  4. Change in temperature
Show answer & solution

Answer: (A) Net work done during the cycle

Clockwise cycles produce net work (heat engines).

Practice these 39 questions interactively →