What is an air-standard cycle?
Show answer & solution
Answer: (B) An idealised cycle in which air, treated as a perfect gas, is the working substance
It is used to analyse internal combustion engines and gas turbines.
Mechanical Engineering · Thermodynamics
37 questions, each with the answer and a worked solution.
Practice interactively and track your score →What is an air-standard cycle?
Answer: (B) An idealised cycle in which air, treated as a perfect gas, is the working substance
It is used to analyse internal combustion engines and gas turbines.
What are the four processes of the Otto cycle?
Answer: (C) Two reversible adiabatic processes and two constant-volume processes
It is the ideal cycle for spark-ignition (petrol) engines.
What is the efficiency of the Otto cycle in terms of compression ratio r?
Answer: (D) 1 − 1/r^(γ−1)
It depends only on the compression ratio for a given gas.
How does increasing the compression ratio affect Otto cycle efficiency?
Answer: (A) It increases efficiency
In practice, knocking limits the compression ratio of petrol engines.
What are the four processes of the Diesel cycle?
Answer: (B) Two reversible adiabatic processes, one constant-pressure heat addition and one constant-volume heat rejection
It is the ideal cycle for compression-ignition engines.
How does reducing the cut-off ratio affect the efficiency of the Diesel cycle?
Answer: (A) Efficiency increases
The Diesel cycle approaches the Otto cycle as cut-off ratio approaches 1.
For the same compression ratio and the same heat input, which cycle is more efficient?
Answer: (C) Otto cycle
For the same compression ratio, Otto > Dual > Diesel.
For the same maximum pressure and temperature, which cycle is more efficient?
Answer: (D) Diesel cycle
Diesel engines can use higher compression ratios.
Why do diesel engines generally have higher efficiency than petrol engines?
Answer: (D) They operate at much higher compression ratios
Compression ratios of 14–22 are common in diesel engines.
What is the dual combustion cycle?
Answer: (C) A cycle in which heat is added partly at constant volume and partly at constant pressure
It is also called the mixed or limited-pressure cycle and models modern diesel engines.
What are the four processes of the Brayton (Joule) cycle?
Answer: (B) Two reversible adiabatic processes and two constant-pressure processes
It is the ideal cycle for gas turbines.
On which cycle do gas turbines work?
Answer: (A) Brayton (Joule) cycle
Gas turbine power plants in Pakistan use open Brayton cycles, often combined with steam cycles.
How does the efficiency of an ideal Brayton cycle without regeneration change with pressure ratio?
Answer: (A) It increases as pressure ratio increases
η = 1 − 1/rp^((γ−1)/γ).
How does increasing the pressure ratio affect an ideal Brayton cycle with regeneration?
Answer: (B) Efficiency decreases
Higher pressure ratios leave less exhaust heat available for regeneration.
What is the purpose of a regenerator in a gas turbine plant?
Answer: (D) Using hot exhaust gases to preheat compressed air before the combustion chamber
It reduces fuel consumption.
What is intercooling in a gas turbine or compressor?
Answer: (C) Cooling the air between stages of compression to reduce compressor work
It brings compression closer to isothermal.
What is the Stirling cycle?
Answer: (B) A cycle with two isothermal processes and two constant-volume regenerative processes
It is used in some heat engines and cryocoolers.
What is the Ericsson cycle?
Answer: (A) A cycle with two isothermal processes and two constant-pressure regenerative processes
Like the Stirling cycle, it can reach Carnot efficiency with ideal regeneration.
How does the efficiency of an ideal Stirling cycle with perfect regeneration compare with a Carnot cycle between the same temperatures?
Answer: (D) They are equal
Both are reversible cycles.
Which cycles are reversible and can theoretically achieve Carnot efficiency?
Answer: (D) Carnot, Stirling and Ericsson cycles (with ideal regeneration)
Ideal regeneration is required for Stirling and Ericsson cycles.
What is the Atkinson cycle?
Answer: (B) A cycle in which heat is added at constant volume and rejected at constant pressure
It uses a longer expansion stroke than compression stroke.
What is the Bell–Coleman cycle?
Answer: (A) The reversed Brayton (Joule) cycle used for air refrigeration
It is used in aircraft air-conditioning systems.
What is the mean effective pressure (m.e.p.) of a cycle?
Answer: (C) The constant pressure that would produce the same net work during one stroke as the actual cycle
m.e.p. = net work ÷ swept volume.
What is the compression ratio of an engine?
Answer: (C) The ratio of total cylinder volume to clearance volume
r = (Vs + Vc)/Vc.
What is the efficiency of an Otto cycle with a compression ratio of 8, taking γ = 1.4?
Answer: (B) About 56.5%
η = 1 − 1/8^0.4 ≈ 0.565.
For minimum work in a reciprocating air compressor, what should the compression process be?
Answer: (A) Isothermal (n = 1)
Multi-stage compression with intercooling brings the process closer to isothermal.
What is the isothermal efficiency of a compressor?
Answer: (D) The ratio of isothermal work to actual work input
It shows how close compression is to the ideal minimum work.
What is the volumetric efficiency of a reciprocating compressor?
Answer: (A) The ratio of the actual volume of air drawn in to the swept volume
Clearance volume reduces volumetric efficiency.
Why are multi-stage compressors used for high pressure ratios?
Answer: (C) They reduce work input and keep delivery temperature lower using intercooling
They also improve volumetric efficiency.
What is the condition for minimum work in a two-stage compressor with perfect intercooling?
Answer: (D) The pressure ratio of each stage is equal (p₂ = √(p₁p₃))
Equal work is then done in each stage.
What is the main reason petrol engines have a lower compression ratio than diesel engines?
Answer: (B) Higher compression in petrol engines causes knocking (detonation)
Knocking damages the engine and reduces efficiency.
What is the cut-off ratio in a Diesel cycle?
Answer: (D) The ratio of the volume at the end of heat addition to the volume at the start of heat addition
It is also called the load ratio.
What is the pressure ratio in a Brayton cycle?
Answer: (D) The ratio of compressor delivery pressure to inlet pressure
Higher pressure ratios raise ideal efficiency.
Which cycle is used for aircraft refrigeration?
Answer: (C) Reversed Brayton (Bell–Coleman) air cycle
Air is light and readily available on aircraft.
What is the main limitation on raising the turbine inlet temperature in a gas turbine?
Answer: (A) The strength of turbine blade materials at high temperature
Blade cooling and special alloys are used to allow higher temperatures.
What is the efficiency of an ideal Brayton cycle with a pressure ratio of 8, taking γ = 1.4?
Answer: (B) About 44.8%
η = 1 − 1/8^(0.4/1.4) ≈ 0.448.
What is the clearance volume of a reciprocating engine or compressor?
Answer: (D) The volume remaining in the cylinder when the piston is at top dead centre
Clearance volume affects compression ratio and volumetric efficiency.