What is a machine in mechanics?
Show answer & solution
Answer: (C) A device that enables a load to be lifted or moved by a smaller or more convenient effort
Levers, pulleys and screw jacks are simple machines.
Mechanical Engineering · Engineering Mechanics
30 questions, each with the answer and a worked solution.
Practice interactively and track your score →What is a machine in mechanics?
Answer: (C) A device that enables a load to be lifted or moved by a smaller or more convenient effort
Levers, pulleys and screw jacks are simple machines.
What is mechanical advantage?
Answer: (B) The ratio of load lifted to effort applied
MA = W/P.
What is velocity ratio?
Answer: (D) The ratio of the distance moved by the effort to the distance moved by the load
It depends only on the geometry of the machine.
What is the efficiency of a machine?
Answer: (A) The ratio of mechanical advantage to velocity ratio
It is also the ratio of output work to input work.
In an ideal machine, how does mechanical advantage compare with velocity ratio?
Answer: (C) They are equal
An ideal machine has no friction and 100% efficiency.
In an actual machine, how does mechanical advantage compare with velocity ratio?
Answer: (B) Mechanical advantage is less than velocity ratio
Friction makes efficiency less than 100%.
What is a reversible machine?
Answer: (C) A machine whose efficiency is more than 50%, so the load can drive the machine backwards when the effort is removed
A self-locking machine has efficiency below 50%.
What is the law of a machine?
Answer: (A) A linear relation between effort and load, P = mW + C
C is the effort needed to overcome friction at no load.
What is the maximum mechanical advantage of a machine following P = mW + C?
Answer: (D) 1/m
It is approached as the load becomes very large.
In a lever of the first order, where is the fulcrum?
Answer: (B) Between the effort and the load
A see-saw, a pair of scissors and pliers are first-order levers.
In a lever of the second order, where is the load?
Answer: (C) Between the fulcrum and the effort
A wheelbarrow, nutcracker and bottle opener are second-order levers.
In a lever of the third order, where is the effort applied?
Answer: (D) Between the fulcrum and the load
Tongs, tweezers and the human forearm are third-order levers.
Which type of lever always has a mechanical advantage less than one?
Answer: (A) Third-order lever
It gives speed and range of movement rather than force.
What is the velocity ratio of a wheel and axle with wheel diameter D and axle diameter d?
Answer: (B) D/d
A larger wheel gives a larger velocity ratio.
What is the velocity ratio of a simple screw jack with lever length L and screw pitch p?
Answer: (B) 2πL/p
The effort moves 2πL while the load rises one pitch.
What is the velocity ratio of the first system of pulleys with n movable pulleys?
Answer: (A) 2ⁿ
Each movable pulley doubles the velocity ratio.
What is the velocity ratio of a block-and-tackle (second system) pulley arrangement?
Answer: (D) Equal to the total number of pulleys
Each rope segment supporting the lower block adds to the velocity ratio.
What is the velocity ratio of the third system of pulleys with n pulleys?
Answer: (C) 2ⁿ − 1
Here each pulley rope is attached to the load.
What is the velocity ratio of a Weston differential pulley block with pulley diameters D and d?
Answer: (A) 2D/(D − d)
A small difference in diameters gives a large velocity ratio.
Why are screw jacks and worm-and-wheel lifting tackles usually made self-locking?
Answer: (C) So that the load does not run back when the effort is removed
Self-locking machines have efficiency below 50%.
What is the efficiency of a machine that lifts a load of 600 N with an effort of 100 N, if its velocity ratio is 8?
Answer: (C) 75%
MA = 6; efficiency = 6 ÷ 8 = 0.75.
What is the mechanical advantage of a lever with an effort arm of 2 m and a load arm of 0.5 m?
Answer: (D) 4
MA = effort arm ÷ load arm.
Which of the following is a first-order lever?
Answer: (B) Pair of scissors
The fulcrum lies between the effort and the load.
Which of the following is a second-order lever?
Answer: (A) Wheelbarrow
The load lies between the fulcrum and the effort.
Which of the following is a third-order lever?
Answer: (C) Fire tongs
The effort lies between the fulcrum and the load.
What is a simple machine?
Answer: (D) A device that changes the magnitude or direction of a force to make work easier
The six classical simple machines are the lever, wheel and axle, pulley, inclined plane, wedge and screw.
What is the mechanical advantage of a single fixed pulley?
Answer: (B) 1
It only changes the direction of the force.
What is the velocity ratio of a single movable pulley?
Answer: (C) 2
The effort moves twice as far as the load.
What is the velocity ratio of an inclined plane of length l and height h?
Answer: (A) l/h
A longer, gentler slope needs less effort.
What is the efficiency of a machine with no friction?
Answer: (B) 100%
Real machines always have efficiency below 100%.