What are canals that run throughout the year, fed by barrages and reservoirs, called?
Show answer & solution
Answer: (D) Perennial canals
Most canals of Punjab are perennial.
Agriculture · Irrigation & Water Management
52 questions, each with the answer and a worked solution.
Practice interactively and track your score →What are canals that run throughout the year, fed by barrages and reservoirs, called?
Answer: (D) Perennial canals
Most canals of Punjab are perennial.
What are canals taken directly from rivers without regulators, carrying water only during high river flows, called?
Answer: (C) Inundation canals
They were common before barrages were built.
What is the correct order of canals from the river to the field?
Answer: (A) Main canal, branch canal, distributary, minor, watercourse
Farmers receive water from watercourses through field channels.
What is a canal aligned along the ridge (watershed) line called, which avoids cross-drainage works?
Answer: (D) Watershed (ridge) canal
It can irrigate land on both sides.
What is the main purpose of lining canals and watercourses?
Answer: (A) To reduce seepage losses and waterlogging
Lining also allows higher velocities and smaller sections.
Why are weep holes provided in canal linings?
Answer: (D) To relieve water pressure behind the lining
They prevent uplift damage to the lining.
Which theory, based on studies of the Upper Bari Doab Canal in 1895, gave the critical non-silting, non-scouring velocity?
Answer: (C) Kennedy's silt theory
Kennedy related critical velocity to depth: V = 0.55 D^0.64.
Which theory describes canals that neither silt nor scour as being "in regime"?
Answer: (D) Lacey's regime theory
Lacey gave the wetted perimeter as P = 4.75√Q.
What is a canal that carries water without appreciable silting or scouring called?
Answer: (B) Regime (stable) canal
Regime conditions are the goal of alluvial canal design.
What is an outlet whose discharge is independent of water levels in the distributary and watercourse called?
Answer: (C) Modular (rigid) outlet
Modular outlets give fixed discharge.
What is an outlet whose discharge depends on the distributary water level but not on the watercourse level called?
Answer: (C) Semi-modular (flexible) outlet
The adjustable proportional module (APM) is a common example.
What is an outlet whose discharge depends on the difference of water levels in the distributary and watercourse called?
Answer: (D) Non-modular outlet
Simple pipe outlets are non-modular.
What is the ratio of the rate of change of outlet discharge to the rate of change of distributary discharge called?
Answer: (A) Flexibility
When flexibility equals 1, the outlet is proportional.
Which structure is built at the head of a canal to regulate supplies into it?
Answer: (D) Head regulator
Head regulators also control silt entry.
Which structure is built across a parent canal to raise its water level for supplying off-taking channels?
Answer: (A) Cross regulator
Cross regulators help maintain supplies during low flow.
Which structure releases surplus water from a canal into a natural drain?
Answer: (A) Canal escape
Escapes protect canals from overtopping.
Which structure is built where the natural ground slope is steeper than the canal bed slope?
Answer: (A) Canal fall
Falls can also be used for small hydropower.
Which cross-drainage work carries a canal over a natural drain, with the drain flowing freely below?
Answer: (B) Aqueduct
In a syphon-aqueduct, the drain flows under pressure.
Which cross-drainage work carries a drain over a canal?
Answer: (A) Super-passage
It is used when the canal bed is much lower than the drain.
Which cross-drainage work is provided when a canal and a large drain meet at nearly the same level?
Answer: (B) Level crossing
Regulators control flows from both.
What is the difference between a weir and a barrage?
Answer: (A) A barrage has gates to control the pond level, while a weir raises water mainly by its crest
Most structures on Pakistan's rivers are gated barrages.
What is the rise in river water level upstream of a weir or barrage called?
Answer: (C) Afflux
Afflux must be limited to avoid flooding upstream areas.
Which structures in the river bed upstream of a canal head reduce silt entry into the canal?
Answer: (B) Silt excluders
Silt ejectors remove silt from the canal itself.
What is the wall built at right angles to the weir axis, separating under-sluices from the rest of the weir, called?
Answer: (D) Divide wall
It helps create a still pocket in front of the canal head.
Which structure allows fish to move upstream past a weir or barrage?
Answer: (A) Fish ladder
Water velocity in the ladder is kept low enough for fish to swim.
Which theory treats seepage under a weir as travelling along the creep length of the floor?
Answer: (D) Bligh's creep theory
Lane later improved it with weighted creep.
Which seepage theory for hydraulic structures uses the method of independent variables and exit gradient?
Answer: (A) Khosla's theory
It gives safer designs for structures on permeable foundations.
What is the removal of soil particles from under a structure by seeping water, causing failure, called?
Answer: (D) Piping
A safe exit gradient prevents piping.
What are works built to guide and confine a river to a desired course called?
Answer: (A) River training works
They include guide banks, groynes and marginal bunds.
What is a groyne pointing upstream, which repels the river current away from the bank, called?
Answer: (B) Repelling groyne
An attracting groyne points downstream.
What are earthen embankments built along rivers to protect land from floods called?
Answer: (C) Marginal embankments (bunds)
They confine floods within the river's flood plain.
What is the pattern of river bends formed by erosion on the outer bank and deposition on the inner bank called?
Answer: (C) Meandering
Rivers of the Indus plains meander widely.
What is a river that rises and falls suddenly after storms called?
Answer: (B) Flashy river
Hill torrents are flashy.
Which type of dam resists water pressure mainly by its own weight?
Answer: (B) Gravity dam
Concrete gravity dams need strong rock foundations.
Which type of dam transfers water load to the valley sides through curved shape?
Answer: (B) Arch dam
Arch dams suit narrow gorges with strong rock sides.
What is the structure that safely releases surplus floodwater from a reservoir called?
Answer: (D) Spillway
Tarbela and Mangla have large spillways.
What is the vertical distance between the top of a dam or embankment and the maximum water level called?
Answer: (C) Freeboard
Freeboard prevents overtopping by waves.
What is a temporary dam built to keep a construction site dry called?
Answer: (B) Coffer dam
Coffer dams are removed after construction.
What is the main factor reducing the useful life of reservoirs like Tarbela and Mangla?
Answer: (C) Sedimentation
Silt carried by rivers gradually fills the reservoir.
What is the area irrigated in a year on which water charges are levied called?
Answer: (B) Area assessed
Water charges (abiana) are collected by irrigation departments.
What is the percentage of culturable command area irrigated in a year called?
Answer: (B) Annual irrigation intensity
Intensity in many canal commands exceeds 100% due to two crops a year.
What is the total area which can be irrigated by a canal system, including uncultivable land, called?
Answer: (A) Gross command area (GCA)
Roads, villages and ponds are included in GCA.
What is the part of the gross command area that is fit for cultivation called?
Answer: (D) Culturable command area (CCA)
Irrigation planning is based on CCA.
What is the ratio of the number of days a canal actually runs to the total days of the irrigation period called?
Answer: (C) Time factor
A low time factor means the canal must carry larger discharge when running.
Which earthen dam component prevents seepage through the dam body?
Answer: (B) Impervious clay core
A filter and drain are placed downstream of the core.
What is the layer of stones placed on the upstream face of an earth dam to protect it from wave action called?
Answer: (B) Rip-rap
Rip-rap prevents erosion of the slope.
What is the line within an earth dam below which the soil is saturated called?
Answer: (D) Seepage (phreatic) line
The phreatic line must not cut the downstream face.
What is the level of water in a reservoir below which water cannot be withdrawn by gravity called?
Answer: (D) Dead storage level
Dead storage is reserved for sediment.
What is the storage between the minimum pool level and the normal pool level of a reservoir called?
Answer: (C) Live (useful) storage
Live storage is used for irrigation and power.
What is the storage above the normal pool level during floods called?
Answer: (D) Surcharge storage
It is temporary and released through the spillway.
Which curve is used to determine the required storage capacity of a reservoir from inflow and demand?
Answer: (A) Mass curve (Rippl diagram)
Rippl's method plots cumulative inflow against time.
What is the curve showing the relationship between stage (water level) and discharge of a river called?
Answer: (D) Rating curve
Once prepared, discharge is read from gauge levels.