What is the branch of science dealing with the mechanical behaviour of water at rest and in motion called?
Show answer & solution
Answer: (C) Hydraulics
Hydraulics is the basis of designing canals, pipes and structures.
Agriculture · Irrigation & Water Management
38 questions, each with the answer and a worked solution.
Practice interactively and track your score →What is the branch of science dealing with the mechanical behaviour of water at rest and in motion called?
Answer: (C) Hydraulics
Hydraulics is the basis of designing canals, pipes and structures.
What is the weight per unit volume of a liquid called?
Answer: (B) Specific weight
The specific weight of water is about 1000 kgf/m³ (9.81 kN/m³).
What is the ratio of the specific weight of a liquid to that of pure water called?
Answer: (B) Specific gravity
Pure water has a specific gravity of 1.0.
Which property of a fluid controls its rate of flow by resisting shear?
Answer: (C) Viscosity
Honey has high viscosity and water has low viscosity.
Why does a falling raindrop take a spherical shape?
Answer: (B) Surface tension
Surface tension minimizes surface area.
What causes water to rise in a narrow glass tube?
Answer: (B) Capillarity (adhesion greater than cohesion)
Mercury is depressed in glass because cohesion dominates.
Which law states that pressure at a point in a fluid at rest is equal in all directions?
Answer: (B) Pascal's law
Hydraulic jacks work on Pascal's law.
What does Archimedes' principle state about a body immersed in a liquid?
Answer: (D) It experiences an upward force equal to the weight of liquid displaced
This upward force is called buoyancy.
Which theorem states that the total energy (pressure, velocity and datum heads) of flowing fluid remains constant along a streamline?
Answer: (B) Bernoulli's theorem
It assumes ideal, steady, incompressible flow.
Which principle states that discharge Q = A × V remains constant along a pipe or channel?
Answer: (D) Continuity equation
When area decreases, velocity increases.
What is the velocity head of flowing water?
Answer: (C) v²/2g
The total energy line lies above the hydraulic gradient line by this amount.
What is flow in which conditions at a point do not change with time called?
Answer: (D) Steady flow
Uniform flow has the same velocity at all sections.
What is flow in which water particles move in smooth parallel layers called?
Answer: (B) Laminar flow
Floodwater in rivers is turbulent.
Which dimensionless number distinguishes laminar from turbulent flow?
Answer: (C) Reynolds number
Low Reynolds numbers indicate laminar flow.
Which dimensionless number determines whether open-channel flow is subcritical or supercritical?
Answer: (D) Froude number
Froude number equals 1 at critical flow.
What is the depth of flow at which specific energy is minimum for a given discharge called?
Answer: (C) Critical depth
Flow at critical depth is unstable.
What is open-channel flow with depth greater than critical depth called?
Answer: (B) Subcritical (streaming) flow
Most canal flow is subcritical.
What is the sudden rise of water surface when fast, shallow flow changes to slow, deep flow called?
Answer: (B) Hydraulic jump
It is used to dissipate energy below weirs and spillways.
Which formula gives velocity in open channels as V = C√(RS)?
Answer: (D) Chezy's formula
C is Chezy's coefficient, R hydraulic radius and S slope.
Which formula gives open-channel velocity as V = (1/n)R^(2/3)S^(1/2)?
Answer: (D) Manning's formula
n is the roughness coefficient.
What is the ratio of a channel's flow area to its wetted perimeter called?
Answer: (D) Hydraulic mean depth (hydraulic radius)
For a full circular pipe it equals d/4.
Which equation is used to calculate friction head loss in pipes?
Answer: (C) Darcy–Weisbach equation
Head loss increases with pipe length and velocity.
What is the most economical section of a channel for a given area and slope?
Answer: (B) The section with minimum wetted perimeter and maximum discharge
A rectangular channel is most economical when depth is half the width.
What does one cusec of water mean?
Answer: (D) A flow of one cubic foot per second
1 cusec equals about 28.3 litres per second.
What does one acre-foot of water represent?
Answer: (C) Water to cover one acre to a depth of one foot
One acre-foot equals 43,560 cubic feet (about 1,233 m³).
What unit is commonly used for river flows and reservoir storage in Pakistan?
Answer: (A) Million acre-feet (MAF)
1 MAF is about 1.23 billion cubic metres.
Which structure has a narrow throat and raised floor to measure flow in channels?
Answer: (A) Venturi (Parshall) flume
Parshall and cut-throat flumes are common on watercourses.
Which device for measuring small flows has a V-shaped opening?
Answer: (A) V-notch weir
Triangular notches are accurate for small discharges.
Which trapezoidal weir is used for measuring flow without end-contraction correction?
Answer: (C) Cippoletti weir
Its side slopes are 1 horizontal to 4 vertical.
Which instrument measures the velocity of water in a stream with a rotating cup or propeller?
Answer: (D) Current meter
Velocity is measured at several points across the section.
At what depth below the surface does a single current meter reading give the mean velocity in a channel?
Answer: (A) 0.6 of the depth
The average of readings at 0.2 and 0.8 depth is also used.
What is the simplest method of estimating stream velocity by timing an object over a distance?
Answer: (C) Float method
Surface velocity is multiplied by about 0.85 to get mean velocity.
Which instrument measures the velocity of flow by converting velocity head into pressure head?
Answer: (B) Pitot tube
It is named after Henri Pitot.
Which instrument measures discharge through pipes using a constriction?
Answer: (D) Venturimeter
Pressure difference between inlet and throat gives the discharge.
What is the resultant water pressure per unit length on a vertical dam face of height H?
Answer: (C) ½ w H²
It acts at H/3 above the base.
At what height above the base does the resultant water pressure on a vertical face act?
Answer: (B) H/3
Pressure increases linearly with depth.
What is the closed conduit carrying water under pressure from a reservoir to turbines called?
Answer: (B) Penstock
Penstocks are used in hydropower plants like Tarbela.
What is the sudden pressure rise in pipes when flow is stopped quickly called?
Answer: (D) Water hammer
Surge tanks protect pipelines from water hammer.